• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.78-85
• /
• 2022

The consumption of Flammulina velutipes mushroom imported from Korea has been associated with the cases of listeriosis in the United States, Canada, and Australia. We investigated the effect of sanitizing the plastic wrapper (used in packaging F. velutipes) with slightly acidic electrolyzed water (SAEW) and ultraviolet C waterproof light-emitting diode (UVC-W-LED) on reducing the Listeria monocytogenes. Further, the effect of UVC-LED on L. monocytogenes growth in F. velutipes at different storage temperatures (2, 4, and 10℃) was determined. The combined (SAEW+UVC-W-LED) treatment for 5-10 min reduced 99.9% of bacterial population from the contaminated plastic wrapper. In addition, the UVC-LED treatment for 3 min reduced the L. monocytogenes concentration in F. velutipes by 0.47 log CFU/g. Moreover, the growth of L. monocytogenes in the treated mushrooms was slower than that of the untreated (control) ones. L. monocytogenes concentration in F. velutipes increased over 3 log CFU/g at 2℃ and 10℃ for 60 and 10 days, respectively. The growth of L. monocytogenes at the bottom of mushrooms was faster than that at the top at both the temperatures. These results indicate that the combined SAEW+UVC-W-LED treatment of plastic wrappers and the UVC-LED treatment of mushrooms can be used as potential hurdle technologies to control the risk of L. monocytogenes in mushrooms prior to packaging at farms.

• Journal of agriculture & life science
• /
• v.53 no.3
• /
• pp.27-39
• /
• 2019

The purpose of this study was to investigate the effect of hot water treatment and pH corrected lime sulfur combination treatment on the fungicidal and bacterial disinfection effects and germination rate of organic lettuce seeds. Among the followers, Alternaria sp. was infected 53.3% and Aspergillus sp. and Cladosporium sp. Infected 14.5% and 5.4%, respectively. Bacteria were isolated only Pseudomonas sp., and infected with 16.5%. In order to investigate the effect of disinfection on the temperature of hot water (45℃, 50℃, 55℃ and 60℃). The seed germination rate sharply decreased with increasing temperature and treatment time. The germination effect and germination rate of the follower were highest when hot water treatment was carried out for 20 minutes in hot water at 50℃. In the case of combined treatment of 50℃ hot water for 10 min and 0.4% pH adjusted lime sulfur mixture, showed the highest sterilization effect and germination rate with 100% and 97.6%, respectively. The results of this study can contribute to the development of technology to sterilize not only seed surface but also fungi and bacteria inside of seed.

• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.105-113
• /
• 2002

This study was aimed to investigate the practice on the infection control and dental waste disposal in dental clinic. The data used in this study had been collected in 100 dental clinics located in Seoul city from August to October, 2001. It was shown that examination instruments, oral surgery instruments, and periodontal instruments were almost sterilization in dental clinic. It was high in the recognition of individual protection but it was low in the degree of practice. Therefore, the practice in infection control is very important to dental team for safety of patients and operators.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.27-36
• /
• 2019

Purpose: The aims of this study were to evaluate the dentist's awareness and the actual status of infection control of noncritical dental instruments. Materials and Methods: 40 dental clinics in Daejeon, South Chungcheong, North Chungcheong and North Jeolla provinces were surveyed. The questionnaire was delivered to the dentists belonging to those clinics, and the awareness and the practice of infection control were examined. The microbial contamination on the surface of five noncritical instruments (impression gun, light curing unit, 3-way syringe, shade guide, and dental floss dispenser) used by them was measured with an ATP luminometer. Correlation analysis between the awareness and the actual state of infection control was conducted. Results: Awareness and frequency of infection control was highest in the 3-way syringe. Surface disinfection using disinfectant was most frequent in all instruments. 3-way syringes and shade guides were less contaminated than impression guns, light curing units, and dental floss dispensers. Conclusion: 3-way syringes had a significant correlation between user awareness of infection control and surface contamination, and the higher awareness, the lower the contamination measurement was shown.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.235-242
• /
• 2007

This study was conducted to investigate the effect of aerosolized chemical sanitizers on inhibiting foodborne pathogens such as Escherichia coli O157:H7, Salmonella typhimurium, and Listeria monocytogenes. Five domestic commercial sanitizers subjected to five groups of sanitizer (chlorine-based, hydrogen peroxide-based, Iodophor-based, quaternary ammonium-based, and alcohol-based sanitizers) were aerosolized by an aerosol generator into a model cabinet and treated in laboratory media containing three pathogens for 1 h at room temperature. Aerosolized hydrogen peroxide-based and quaternary ammonium-based sanitizers were effective at inhibiting levels of E. coli O157:H7 (ca. 4-9 log reductions) whereas other aerosolized sanitizers such as chlorine-based, Iodophor-based, and alcohol-based sanitizers did not significantly reduced the levels of E. coli O157:H7. For S. typhimurium, the only aerosolized hydrogen peroxide-based sanitizer was effective and resulted in ca. 5-9 log reduction. Aerosolized hydrogen peroxide-based, Iodophor-based, and quaternary ammonium-based sanitizers significantly reduced levels of L. monocytogenes and especially, aerosolized quaternary ammonium-based sanitizer was strongly effective to kill L. monocytogenes, resulted in higher than 8.8 log reduction. And there was no special trend in inhibitory efficacy of sanitizers aerosolized by 1.6 or 2.4 MHz aerosol generators. From these results, aerosolization has great potential for use in commercial applications however it's efficacy could be very different depending on type of sanitizers.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.548-552
• /
• 2004

Intracanal disinfection of infected root canal is one of important treatment procedure. This in vitro study aimed to evaluate whether the surface polymers of controlled release drug (CRD) can effectively control the release rate of chlorhexidine for root canal disinfection. Four CRD prototypes were prepared: Group A (n=12); The core device (absorbent paper point) was loaded with 40% CHX solution as control. Group B (n=12); same as group A, but the device was coated with chitosan. Group C (n=12); same as group A and then coated three times with 5% PMMA. Group D (n=12); same as group A and then coated three times with 3% PLGA. All CRD prototypes were soaked in 3 mL distilled water for experimental periods and the concentrations of released CHX from each CRD prototype were determined using a UV spectrophotometer. Results showed that release rate of CHX were the greatest in the non-coated group (control group), followed by the chitosan-coated group, the PLGA-coated group, and the PMMA-coated group (P < 0.05). This data indicate that surface polymers can control the release rate of CHX from the CRD prototypes.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2023

Skin sanitizers are effective in killing or removing pathogenic microbial contaminants from the skin of food handlers, and the progressive growth of consumer interest in personal hygiene tends to drive product diversification. This review covers the advances in the application of efficacy tests for hand sanitizers to suggest future perspectives to establish an assessment system that is optimized to each product type (gel, liquid, and wipes). Previous research on the in vivo simulative test of actual consumer use has adopted diverse experimental conditions regardless of the product type. This highlights the importance of establishing optimal test protocols specialized for the compositional characteristics of sanitizers through the comparative analysis of test methods. Although the operational conditions of the mechanical actions associated with wiping can affect the efficacy of the removal and/or the inactivation of target microorganisms from the skin's surface, currently there is a lack of standardized use patterns for the exposure of hand sanitizing wipes to skin. Thus, major determinants affecting the results from each step of the overall assessment procedures [pre-treatment - exposure of sanitizers - microbial recovery] should be identified to modify current protocols and develop novel test methods. The ex vivo test, designed to overcome the limited reproducibility of in vivo human trials, is also expected to replicate the environment for the contact of sanitizers targeting skin microorganisms. Recent progress in the area of skin microbiome research revealed distinct microbial characteristics and distribution patterns after the application of sanitizers on hands to establish the test methods with the perspectives on the antimicrobial effects at the community level. The future perspectives presented in this study on the improvement of efficacy test methods for hand sanitizers can also contribute to public health and food safety through the commercialization of effective sanitizer products.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.133-137
• /
• 1982

An experiment was conducted to find out the proper and effective fumigation method for harvested fresh chestnuts produced in Korea. Fumigation with phosphine, causing damages on chestnuts by rapid corruption or change in color on pericarp, did not completely kill chestnut curculio and nut fruit tortrix larvae in harvested fresh chestnuts regardless of long exposure of chestnuts to phosphine. Any damages not being appeared by fumigant, fumigation with methyl bromide at $40g/m^3$ for 4 hours at $21^{\circ}C$ would retain the low control against inclusion of any chestnut pests tested. Though fumigation with methyl bromide at $50g/m^3$ for 24hours was effective against any larvae of chestnut insects control, they caused serious damages by making the flesh surface of harvested fresh chests dark or dense brown. However, fumigation with methyl bromide at $50g/m^3$ for 4 hours at $21^{\circ}C$ resulted in complete kill of larvae of Curculio dentipes and Carpocapsa splendana in harvested fresh chestnuts with no significant damages on the treated fruits.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.171-177
• /
• 2024

In this study, two general X-ray device, CT, and MRI inspection devices were selected from general hospitals in the Daejeon area and an experiment was conducted to predict the level of infection by measuring the surface contamination of the inspection devices at different times and to use it as basic data for infection prevention. As a result, the surface contamination level by time zone for general X-ray devices and MRI examination devices was in the order of 13H > 8H > 16H, and for CT examination devices, it was 13H > 16H > 8H, which appeared to be influenced by the number of tests. In addition, the surface contamination results for each part of the test device showed that the highest ATP contamination value was found on the stand bucky handle for the general X-ray device, the headrest for the CT examination device, and the operation switch for the MRI examination device, which was closely related to the number of contacts. As a result of comparing before and after disinfection, all devices showed a significant decrease after disinfection. Based on the results of the experiment, it is believed that it can be used as basic data to identify the level of contamination in radiology laboratories and prevent infectious diseases.

• Journal of Korean Academy of Dental Administration
• /
• v.7 no.1
• /
• pp.50-55
• /
• 2019

The purpose of this study was to compare the number of bacteria before and after the use of surface disinfectants, demonstrate the bactericidal effect of surface disinfectants, and emphasize on the importance of surface disinfectants by recognizing the importance of infection control in dentistry. Chlorhexidine, hydrogen peroxide, ethanol, and chemical disinfectants are commonly used in dentistry. NaOCl was selected as the experimental group, and the bacterium test results obtained by comparing the table without surface sterilization as a control group showed that all disinfectants had an effective bactericidal effect (p<0.05). In the growth inhibition test comparing the experimental and control groups, all results were 100%, proving the effectiveness of surface disinfectants. The results showed that all surface disinfectants preferred and used by medical institutions were effective. Therefore, all surface disinfectants used in the experimental group were effective for surface disinfection for infection control. Dental clinicians should be aware of the necessity of disinfection of surfaces, such as table, chairs, and unit chairs, and make an active effort to ensure that both clinicians and patients are safe from infection.