• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.977-980
• /
• 2004

본 논문에서는 저가 고효율 태양전지를 제작하기 위하여 p형 다결정 실리콘 기판을 사용하여 수산화 칼륨(KOH)이 포함된 용액에 Saw damage 과정 후 불산이 함유된 용액에 전기화학적 양극산화 과정으로 실리콘 웨이퍼 표면에 요철을 형성하여 다공성 실리콘을 형성 하였다. 본 논문은 전기화학적 에칭방법으로 기존의 진공장비로 제작된 반사방지막의 반사율만큼 감소된 다공성 실리콘 반사방지막을 형성하였다. 전자빔 증착기(e-beam evaporator)로 단층으로 형성된 $TiO_2$의 반사방지막은 400-1000 nm의 파장 범위에서 4.1 %의 평균 반사율을 가졌으며, 양극산화과정으로 형성된 다공성 실리콘은 400-1000 nm의 파장의 범위에서 4.4 %의 평균 반사율을 가졌다. 본 연구는 태양전지의 반사방지막 형성을 기존의 제작 방법보다 간단하고 저렴한 방법으로 접근하여 태양전지의 변환효율을 상승하는데 목적을 두었다.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2018

Multilayer mirrors have widely been used for monochromatization of X-ray with high reflection efficiency. The reflected X-ray energy or wavelength is determined by the d-spacing of a multilayer mirror and the incidence angle. The reflectivity critically depends on the number of bilayers and surface roughness on each interface. The multilayer mirror has a structure of alternative deposition of high and low Z-elements on the substrate. Each interface should be considered in the calculation of reflectivity. In this paper, we examine the degradation of reflectivity by the inter-diffusion combined with surface roughness on each interface for a W/Si multilayer mirror. In the depth-graded W/Si multilayer mirror, the FWHMs for angle and energy were larger than them of the uniform multilayer mirror. Inter-diffusion considerable gave rise to the degradation of reflectivity. To obtain measured reflectivity closed to the expected reflectivity, the inter-diffusion on W-Si and Si-W interfaces should be considered.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.132-137
• /
• 2005

Neutron reflectometer has been installed at HANARO, research reactor in Korea. It has vertical sample geometry and the wavelength of incident neutron beam is $2.459\;\AA$ Neutron fluxes at monochromator and sample position were $4.5\times10^9\;n/cm^2/sec,\;6.64\times10^6\;n/cm^2/sec4 those were measured by gold wire activation method. Also, some reference thin films such as d-PS, $SiO_2$ were measured and analyzedwith HANARO neutron reflectometer. As result of the work, it was certified that minimum reflectivity and available Q range were $10^{-6},\;and\;0.003\sim0.3\;\AA^{-1}$ respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.484-488
• /
• 2010

Infrared emissivity is one of the most important factors for the temperature measurement by infrared thermography. Although the infrared emissivity of an object can be measured from the ratio of blackbody and the object, at room temperature it is practically difficult to measure the value due to the background effects. Hence, quantitative reflectance of bare steel plate and the surface of coating was measured by FT-IR spectroscopy and emissivity was calculated from this. The emissivity of polished bare steel surface was from 0.06 to 0.10 and the value for the unpolished bare steel can not be achieved because optical characteristics changes of surface roughness induces erroneous results. Emissivity of transparent paint coated steel was from 0.50 to 0.84. Depends on the IR absorption regions, which is a characteristic value of the coating, emissivity changes. This study suggests surface condition of material, thickness, roughness et cetra are important factor for IR optical characteristics. Emissivity measurement by reflection method is useful technique to be applied for metal and it with coating applied on the surface. The range of experimental errors of temperature can be narrowed by the application of infrared thermography from the measured thermal emissivity.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.263-267
• /
• 2009

In order to improve the hydrophilic property on the surface of d-PMMA(deuterated poly-(methyl methacrylate)) film, it was exposed to oxygen plasma, All experimental conditions were same except to plasma exposure time that was varied from 0 to 180 s, The effects according to the exposure time were identified using contact angles, X-ray reflectometer(XRR), neutron reflectometer(NR), and X-ray photoelectron spectroscopy(XPS). By confirming that as the exposure time increases, water contact angle decreases while the composition of oxygen increases, it was confirmed that the composition of oxygen has a huge influence on improving the hydrophilic property. The physical characters as a function of the exposure time were investigated by the XRR. By analyzing complementally the results of the XRR, NR, and XPS, more detailed chemical bonding conditions were studied by obtaining not only composition of the carbon and oxygen but that of the hydrogen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.305-305
• /
• 2012

빗각 증착은 입사 증기가 기판과 평행하게 입사하지 않고 기울여져 입사하는 코팅 방법으로 박막의 조직을 다양한 형태로 제어할 수 있다. 사전 연구결과에서 빗각으로 코팅된 알루미늄(Al) 박막의 경우 빗각으로 코팅되지 않은 Al 박막보다 반사율, 표면조도, 내식성이 향상되는 결과를 얻었다. 본 연구에서는 빗각 증착과 Al 박막의 Si 함유량이 반사율, 내열, 내식성에 미치는 영향을 비교 분석하였다. 마그네트론 스퍼터링으로 Al과 Al-Si 합금(Al-3 wt%Si, Al-10wt%Si)을 코팅하였다. 기판은 실리콘 웨이퍼와 염수분무시험을 위해 냉간압연강판을 사용하였으며 기판은 진공용기에 장착하기 전 알코올과 아세톤으로 초음파 세척 후 진공용기에서 글로우 방전을 이용하여 청정을 실시하였다. 기판 청정이 끝나면 기판을 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$의 다양한 빗각으로 고정시켜 다층의 Al과 Al-Si 합금 박막을 코팅하였다. 박막의 조직을 관찰하기 위해 전자현미경을 사용하였으며 Al과 Al-Si 박막이 코팅된 냉간압연강판의 부식 특성을 평가하기 위해서 염수분무시험을 실시하였다. 박막의 치밀도 측정을 위해 Ferroxyl 시험을 실시하여 철과 Ferroxyl 용액이 반응하여 발생하는 파란 반점으로 기공도를 평가하였다. 박막의 내열성 평가를 위해서 대기 전기로를 이용하여 $450^{\circ}C$, $500^{\circ}C$에서 각각 4시간과 8시간 동안 열처리를 실시하여 시편 표면의 색상 변화를 분광광도계와 색차계로 관찰하였다. Al 박막의 Si 함량이 증가할수록 박막의 조직이 치밀해지고 내부식성이 향상되었다. Si이 10 wt% 함유된 박막은$500^{\circ}C$로 8시간 열처리한 후에도 열처리하지 않은 시편과 광택도 비교에서 변화가 크지 않았다. 빗각 $30^{\circ}$에서 코팅한 Si 함량 10 wt%인 박막이 우수한 반사율을 보였으며 염수분무시험에서 216시간이 경과한 후에 적청이 발생하여 우수한 내부식성을 보였다. 따라서 코팅층의 우수한 내부식성과 내열성, 높은 반사율은 다양한 산업분야에 적용이 가능한 우수한 표면처리 소재를 확보할 수 있을 것이라 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.347-356
• /
• 2009

Recently many kind of industry request 3D Modeling and visualize for object. So application of 3D laser scanning system is improved for 3D modeling and survey. But although application of scanner is steady improved, there are variety of caution error is contained in the result. There is request high quality survey for it is restricted by when field. To analysis what is consider major factor of reflect ratio about surface specification as ratio and characteristics accidental error. So this research use 3D laer scanning system what is adopted method of laser measurement for improvement accuracy 3D scan data. As a result we can check reflect volume will be improve as specification of survey object if it has high reflect ratio. It able to improve accuracy how laser scan data is revised by reflect volume.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.209-214
• /
• 2002

The effect of surface roughness on mirror scattering has been studied. Five kinds of substrates with different surface roughness were fabricated. On those substrates, a dielectric multi-layer coating with high reflectivity was deposited by ion beam sputtering and electron beam evaporation. A total integrated scattering measurement set-up was built for the evaluation of deposited samples. Most of the ion beam sputtered mirrors showed lower scattering than the electron beam evaporated one, which deposited on substrates similar in surface roughness. Over ~2 $\AA$ in surface roughness, scattering strongly depend on the micro-structure of the super-polished surface. The lowest scattering we have achieved is 2.06 ppm by ion beam sputtering from the substrate with surface roughness of 0.23 $\AA$.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.807-810
• /
• 2009

This paper deals with a real-time image based relighting system for tangible video teleconference. The proposed image based relighting system renders the extracted human object using the virtual environmental images. The proposed system can homogenize virtually the lighting environments of remote users on the video teleconference, or render the humans like they are in the virtual places. To realize the video teleconference, the paper obtains the 3D object models of users in real-time using the controlled lighting system. In this paper, we use single color camera and synchronized two directional flash lights. Proposed system generates pure shading images using on and off flash images subtraction. One pure shading reflectance map generates a directional normal map from multiplication of each reflectance map and basic normal vector map. Each directional basic normal map is generated by inner vector calculation of incident light vector and camera viewing vector. And the basic normal vector means a basis component of real surface normal vector. The proposed system enables the users to immerse video teleconference just as they are in the virtual environments.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.178-182
• /
• 1998

폴리에스터섬유는 표면구조가 치밀하며, 표면이 평활하면서 높은 굴절율을 갖고 있고, 분자흡광계수가 낮은 분산염료로 염색하기 때문에 섬유표면에서의 빛의 반사가 강하게 되어 짙은 검정색을 얻는데에는 문제점이 있는 것으로 알려져 있다. (중략)