• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.535-541
• /
• 2015

In this study, an approximate multi-objective optimization of a wall-mounted monitor bracket arm was performed. The rotation angle of the bracket arm was determined considering the inplane degree of freedom. We then formulated an optimization problem on maximum stress and deflection. Analyses of mean and design parameters were conducted for sensitivity regarding performance with orthogonal array and response surface method (RSM). RSM models of objective and constraint functions were generated using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by non-dominant sorting genetic algorithm (NSGA-II) were validated through the finite element analysis and we compared the obtained optimal solution by CCD and D-optimal design.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1992.06a
• /
• pp.602-606
• /
• 1992

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.768-776
• /
• 2006

Given an unstructured point set, we use an MLS (melting least-squares) approximation to estimate the local curvatures and their derivatives at a point by means of an approximation surface Then, we compute neighbor information using a Delaunay tessellation. feature points can then be detected as zero-crossings, and connected using curvature directions. Also this approach has a fast computation time than previous methods, which based on triangle meshes. We demonstrate our method on several large point-sampled models, rendered by point-splatting, on which the feature lines are rendered with line width determined from curvatures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3040-3052
• /
• 2000

For effective construction of second-order response surface models, an efficient quad ratic approximation method is proposed in the context of trust region model management strategy. In the proposed method, although only the linear and quadratic terms are uniquely determined using 2n+1 design points, the two-factor interaction terms are mathematically updated by normalized quasi-Newton formula. In order to show the numerical performance of the proposed approximation method, a sequential approximate optimizer is developed and solves a typical unconstrained optimization problem having 2, 6, 10, 15, 30 and 50 design variables, a gear reducer system design problem and two dynamic response optimization problems with multiple objectives, five objectives for one and two objectives for the other. Finally, their optimization results are compared with those of the CCD or the 50% over-determined D-optimal design combined with the same trust region sequential approximate optimizer. These comparisons show that the proposed method gives more efficient than others.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.317-324
• /
• 2008

Optimum design for general or complex structures are required to the need of many numbers of structural analyses. However, current computational environment with single processor is not capable of generating a high-level efficiency in structural analysis and design process for complex structures. In this paper, a virtual parallel computing system communicated by an internet of personal computers and workstation is constructed. In addition, a routine executing Pro/E, ANSYS and optimization algorithm automatically are adopted in the distributed process technique of sequential approximate optimization for the purpose of enhancing the flexibility of application to general structures. By employing the distributed processing technique during structural analysis using commercial application, total calculation time could be reduced, which will enhance the applicability of the proposed technique to the general complex structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.331-344
• /
• 1987

A numerical analysis has been conducted on the interaction of the thermal radiation and natural convection in a rectangular enclosure filled with a gray fluid. P-1 approximation is adopted for the radiative transfer and its application limit is examined. Considered are the Stark number effect, the optical thickness effect and the wall emissivity effect on the flow and heat transfer characteristics. As the Stark number increase or the optical thickness decreases, the boundary layer thickness and the flow velocity increase. Transition to turbulence is retarded with the increase of the radiation effect. When the optical thickness is one, the radiation effect is negligible for the Stark numbers larger than 10.

• ETRI Journal
• /
• v.9 no.1
• /
• pp.97-103
• /
• 1987

짧은 채널($L<1\mum$) MOSFET의 전기적 변수, 특히 문턱전압(threshold voltage)을 최적화시키기 위하여 분석적 문턱전압 모델을 개발하였다. 채널 영역에서의 붕소profile은 계단 (step) profile로 근사시켜 표면전하층과 기판전하층으로 구성하였다. 최대공핍층내에 있는 두 전하층의 각각에 대하여 기하학적으로 근사시킨 전하분배(charge sharing)모델을 적용하고 이차원적 분석을 이용하여 짧은 채널 효과를 계산하였다. 본 모델을 실험치와 비교하고 이온주입 공정의 최적조건을 이끌어내는 데 필요한 변수에 대하여 논의하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.429-432
• /
• 2002

잉크젯 프린팅 기술의 발전과 대형 플루터의 개발로 디지털 프린팅의 활용범위가 넓어지고 있으며, 특히 옥외광고용이나 배너용, 전시용으로의 사용이 확대되면서 종이와 같은 인쇄적성을 가지면서 사용목적에 맞는 물리적 특성을 지닌 다양한 제품들이 개발되고 있다. 이들 중 직물형태의 제품은 그 활용범위가 매우 넓지만 직물의 특성상 종이처럼 평활하지 못하고 직물 표면에서 잉크방울이 완전히 흡착되므로 잉크젯 프린터에 적합한 인쇄적성을 지니지 못해 최근에는 잉크젯 프린팅시 종이 표면과 근사한 최종 도트 사이즈를 얻기 위해 직물의 표면을 안료로 코팅하여 사용한다. (중략)

• 전기의세계
• /
• v.34 no.5
• /
• pp.299-304
• /
• 1985

수직전계 계산방법의 정밀도 및 근사과도의 평가의 기준이 되며 전하중첩법의 전위 및 전계 소계수식에 형태가 남아있다. 또한 영상전하가 전하중첩 및 표면전하법 등에서 이용되고 있는 것이 특징이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.628-630
• /
• 2004

정렬되지 않은 3차원 측정 점들로부터 이들을 근사하는 표면을 재구성하는 방법을 제안하였다. 제안된 방법은 경계면 축소포장 방식에 의한 표면 재구성 방법 (shrink-wrapped boundary face : SWBF)으로, 측정 점으로부터 경계셀과 경계면을 구해 초기 메쉬를 생성하고 이를 연속적으로 축소하는 방식에 의해 표면을 재구성한다 제안된 방법은 기존의 표면 축소포장 방식의 메쉬 생성 방법의 문제점인 물체의 토폴로지에 대한 제악이 없이 어떠한 형태의 표면 재구성에도 적용이 가능하며, 기존 방법이 축소 단계에서 각 메쉬 정점에 대한 최단거리 측정점을 찾는 전역 탐색을 해야 하는데 비해 지역 탐색만으로 최적의 측정 점을 찾을 수 있으므로 처리 시간 측면에서도 우월하다. 실험을 통해 제안된 표면 재구성 알고리즘이 측정 점들간의 관계를 알 수 없는 정렬되지 않은 3차원 정들에 대한 표면 재구성에 매우 안정적이고 효과적임을 확인할 수 있었다.