• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.104-115
• /
• 2014

A levee is defined as an man-made structure protecting the areas from temporary flooding. This paper suggests a methodology for establishing the levee GIS database using the airborne topographic LiDAR(Light Detection and Ranging) data taken in the Nakdong river basins and the WAMIS(WAter Management Information System) information. First, the National Levee Database(NLD) established by the USACE(United States Army Corps Engineers) and the levee information tables established by the WAMIS are compared and analyzed. For extracting the levee information from the LiDAR data, the DSM(Digital Surface Model) is generated from the LiDAR point clouds by using the interpolation method. Then, the slope map is generated by calculating the maximum rates of elevation difference between each pixel of the DSM and its neighboring pixels. The slope classification method is employed to extract the levee component polygons such as the levee crown polygons and the levee slope polygons from the slope map. Then, the levee information database is established by integrating the attributes extracted from the identified levee crown and slope polygons with the information provided by the WAMIS. Finally, this paper discusses the advantages and limitations of the levee GIS database established by only using the LiDAR data and suggests a future work for improving the quality of the database.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.4
• /
• pp.431-442
• /
• 2013

Most of previous studies have insufficiently investigated the shear behavior and fracturing characteristics, experimentally in respect to the change of size of tooth-shaped surface asperity such as length and slope angle in a broad range. This study investigates the influence of the length and slope angle of a tooth-shaped surface asperity on the fracturing characteristics and the interface shear strength by using direct shear test apparatus. A total of 36 interface direct shear tests were conducted by changing the three types of slope angle of surface asperity, four type of length, and three types of normal stress. The shape of fractured surface after the test was quantified by using a three-dimensional surface roughness measurement apparatus. Through the experimental test results, the characteristics of fractured shape of surface asperity according to the normal stress were investigated. In addition, fractured length and height were quantified at each slope angle of surface asperity under a certain normal stress condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.1-9
• /
• 2002

There is the high possibility of crack initiation from mechanical joints, which are widely used in aircraft fuselages, due to the development of stress concentration and contact pressure. In this paper, the mixed-mode stress intensity factors at the surface and deepest points of an inclined quarter elliptical corner crack in mechanical joints are analyzed by the weight function method. The coefficients included in the weight function are obtained by finite element analyses for reference loadings. Critical angle at which mode I stress intensity factor becomes maximum is determined by analyzing the variation of stress intensity factors along incline angle of crack and the effects of the amount of clearance and crack depth on the critical angle are investigated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.1
• /
• pp.11-19
• /
• 2024

In this study, the program was modified by adding the empirical formula of EurOtop (2018) to enable calculation of wave overtopping on armoured slope structures in the FUNWAVE-TVD model using the fully nonlinear Boussinesq equation. The validity of the modified numerical model was verified by comparing it with CLASH data and experiment data for the rubble mound structure. This model accurately reproduced the change in wave overtopping rate according to the difference in the roughness factor of the armoured block, and well reproduced the rate of decrease in wave overtopping rate due to the increase in relative freeboard. The overtopping rate of the armoured slope structures showed significant differences depending on the positioning condition of the armoured blocks. When Tetrapods were placed with regular positioning, the overtopping rate increased significantly compared to when they were placed with random positioning, and it was consistent with when they were placed with Rocks. Meanwhile, when rocks were placed in one row, the wave overtopping rate was greater than when rocks were placed in two rows, which is believed to be due to the influence of the roughness and permeability of the structure's surface.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.527-533
• /
• 2016

A new empirical correlation was developed to identify the effect of an inclination angle on pool boiling heat transfer coefficient of a tube submerged in the saturated water at atmospheric pressure. Through the experiments and the survey of published results 431 data points were obtained and the nonlinear least square method was used as a regression technique. The heat flux of the tube($0{\sim}120kW/m^2$), inclination angle($0^{\circ}{\sim}90^{\circ}$), and the length divided by the diameter of a tube(18~42.52) were selected as major parameters. The newly developed correlation well predicts the experimental data within ${\pm}18%$, with some exceptions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.589-596
• /
• 2015

The occurrence of an inclined edge crack in transversely piezoelectric material is analyzed. Concentrated antiplane mechanical and inplane electrical loads are applied at the boundary and crack surface, respectively. The crack surfaces are assumed to be impermeable to the electric field. Using the Mellin transform with the introduction of a generalized displacement vector, the problem is formulated, and the Wiener-Hopf equation is derived. By solving the equation, the solution is obtained in a closed form. The intensity factors of the stress, the electric displacement, and the energy release rate are obtained for any crack length and inclination angle. These solutions can be used as fundamental solutions and can be superimposed to represent any arbitrary electromechanical loading.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.347-347
• /
• 2020

하천수의 통합적인 물관리를 위해서는 농업용수의 목적으로 취수되는 하천수량과 같은 기초자료의 확보가 필수적이다. 취입보를 통해 취수되는 하천수량은 취수문에 근접한 농업용수로에서 유량을 계측할 수 있는데, 계측지점의 특성에 맞는 최적의 계측방법 선정 및 검증이 필요하다. 대부분의 농업용수로는 단면이 일정하여 수위-유량 관계 곡선식, 초음파 측정법, 수면경사법, 구조물법 등 대부분의 계측방법 적용이 가능한데, 본 연구에서는 전자파 표면 유속계를 이용해 산정한 유량자료와 실측 유량자료와의 적합성을 비교하여 전자파로 측정한 유량자료의 정확도를 확인하였다. 전자파 표면 유속계는 도플러 효과를 이용해 표면 유속을 산정하는 방식으로, 주로 홍수기와 같이 고유량 상황에서 사용되고 있고, 저유량이나 바람이 센 상황에서는 표면유속이 단면 전체의 평균유속을 대변하기 어려워 연중 지속적인 활용도가 낮은 상황이다. 농업용수로는 다양한 규모로 설계되어 있어 저유량에서부터 고유량까지 넓은 범위의 계측방안이 필요한데, 전자파 표면 유속계를 이용한 계측으로는 연속적인 자료 확보에 한계가 있다. 본 연구에서는 일정한 단면에서 전자파 표면 유속계와 실측 유속과의 비교를 통해 적정 수준의 정확도를 가질 수 있는 전자파 표면 유속계 측정범위를 특정하고, 저유량 구간에서 취약한 표면 유속 측정 자료를 보정할 수 있는 개선 방법을 적용하여 농업용수를 취수하는 지점에서 전자파 표면 유속계의 연중 상시 계측 가능 방안에 대한 연구를 수행하였다. 전자파 표면 유속계의 측정 범위 특정과 저유량 계측 개선 방안 등을 통해 추후 농업용수로의 하천수 취수량 계측 방법 선정에 도움이 될 것으로 기대한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.67-74
• /
• 1999

Problems created by supersonic jet impinging on solid objects or ground arise in a variety of situations. For example multi-stage rocket separation, deep-space docking, V/STOL aircraft, jet-engine exhaust, gas-turbine blade, terrestrial rocket launch, and so on. These impinging jet flows generally contain a complex structures. (mixed subsonic and supersonic regions, interacting shocks and expansion waves, regions of turbulent shear layer) This paper describes experimental works on the phenomena (surface pressure distribution, flow visualization) when underexpanded supersonic jets impinge on the perpendicular, inclined plate using a supersonic cold-(low system. The used supersonic nozzle is convergent-divergent type, exit Mach number 2, The maximum on the plate when it was inclined was much larger than perpendicular plate, owing to high pressure recoveries through multiple shocks. Surface pressure distribution as to underexpanded ratio showed similar patterns together.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.777-788
• /
• 2006

This paper describes a displacement mapping technique which represents protruded shapes on the surface of an object. Previous approaches for image-based displacement mapping can represent only shapes depressed from the polygon surface. The proposed technique can represent shapes protruded from the underlying surface in real-time. Two auxiliary surfaces which are perpendicular to the underlying surface are added along the boundary of the polygon surface, in order to represent the pixels which overflow over the boundary of the polygon surface. The proposed approach can represent accurate silhouette of protruded shape. It can represent not only smooth displacement of protruded shape, but also abrupt displacement such as perpendicular protrusion by means of adding the supplementary texture information to the steep surface of protruded shape. By per-pixel instructions on the programmable GPU this approach can be executed in real-time. It provides an effective solution for the representation of protruded shape such as high-rise buildings on the ground.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.215-215
• /
• 2019

우리나라 뿐만 아니라 세계 각지에서 태풍이나 집중호우로 인한 침수피해가 증가하고 있다. 그 원인으로는 수공구조물의 설계빈도를 초과하는 강우, 도시지역 확장으로 인한 불투수지역의 확대, 배수시설의 용량부족 등이 있다. 본 연구에서는 수치지형도, 토양도, 토지이용도 등 누구나 쉽게 구할 수 있는 자료를 이용하여 홍수로 인한 피해가 발생하기 쉬운 지역을 선별하고자 하였다. 우선 강우가 지표면에 도달하게 되면 지표면의 경사, 토양의 특성, 토지이용 등에 영향을 받아 침투되지 못하고 표면에 고이게 되는데 이를 유출생성지도로 표현하였다. 그리고 이렇게 생성된 표면유출수가 지표면의 경사, 지표면의 요철(凹凸), 도로나 철도 등의 인공선형축 등에 영향을 받아 흐르기 쉬우며 이를 유출이동지도로 표현하였다. 또한, 이동된 유출수가 고이기 쉬운 저지대, 지표면의 요철 등으로 인해 누적되는 유출누적지도로 표현하였다. 유출생성지도는 이동, 누적지도의 입력자료가 되어 상류의 유출생성의 정도가 하류지역에 영향을 주도록 하였으며, 최종적으로 유출이 동지도와 누적지도가 실제 침수흔적도와 얼마나 일치하는지 확인하기 위해 서울시 침수흔적도와 비교하였다. 기존의 재해 지도를 얻기 위해서는 강우량을 조사하여 수치모형에 입력함으로써 1차원 또는 2차원의 침수예상도를 작성하는 반면에 본 연구에서는 지형 정보만을 가지고 취약지구를 선정하기 때문에 유역전체 또는 시, 도 단위로 광범위한 연구 영역에 적용이 가능하다. 또한, Spatial MCDM 등을 통해 여러 Raster 자료를 하나의 지표로 나타내기보다 유출수가 생성(또는 이동, 누적)되기 쉬운 지역을 1, 그렇지 않은 지역은 0으로 표현하는 이분법적 분석을 통해 가중치설정과 모호한 경계의 처리 때문에 사용자 및 자료에 따라 취약한 지역이 달라지는 것을 방지하고자 하였다. 이를 통해 표면 유출수로 인해 침수피해가 발생하기 쉬운 지역을 홍수취약지구로 선정하여 침수재해 중점관리 우선순위가 될 수 있도록 하였다.