• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.83-92
• /
• 1998

${\alpha}-sulfonated$ fatty acid polyethylene glycol esters with polyethylene oxide(addition, 3, 5, 10mol) were synthesized through esterification of ${\alpha}-sulfonated$ fatty acid methyl esters with alkyl chain length $C_{12}{\sim}C_{18}$. Their compounds were separated with column chromatography, and confirmed by TLC. Quantitative analysis of all the sulfonates were performed according to JIS K-3362 method, and ethylene oxide unit number were determined by ISO 2270 method. Structural properties of ${\alpha}-sulfonated$ fatty acid methyl esters and their derivatives were also identified from IR, and $^1H$ NMR spectra.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.334-339
• /
• 2013

In this study, as a candidate of the carbon dioxide ($CO_2$) absorbents, the mixture solution of polyethylene glycol dimethyl ether (PEGDME) and tetrahydrofuran (THF) were investigated. $CO_2$ absorption rate was measured by using high pressure $CO_2$ screening equipment in the range of 1 - 10wt% THF. Absorption capacity of the mixture solution was also estimated. Based on the results, we found that mixture solution containing THF had higher absorption rate and $CO_2$ loading capacity compared to PEGDME at $25^{\circ}C$.

• KSBB Journal
• /
• 제31권4호
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.259-266
• /
• 2011

Caffeic acid is a kind of phytochemicals occurred in coffee, which is worked as a carcinogenesis restrainer and antioxidants on the human body. In this study, as one type of caffeic acid derivatives, methoxypolyethylene glycol caffeate(MPC) was synthesized by the esterification between caffeic acid and methoxypolyethylene glycol with N,N'-dicyclohexyl carbodiimide, 4-dimethylamino pyridine. The synthesized product was confirmed by using FT-IR and $^1H$-NMR, thin-layer chromatography. And these compound was investigated as antioxidant, Tyrosinase hindrance and skin moisturizers. In the free radical scavenging study, antioxidant effect of MPC was averagely high than the red ginseng extract that be used as a natural antioxidants. The result of Tyrosinase anti-activity test was better than embryo bud of rice extract at low concentration. At the iNOS anti-activity tested by using Raw 264.7 cell, and confirmed anti-inflammatory function. For the MPC handled with sodium lauryl sulfate, was tested for the skin moisture content and skin moisture loss.

• 폴리머
• /
• 제25권1호
• /
• pp.41-48
• /
• 2001

폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

• 공업화학
• /
• 제3권4호
• /
• pp.620-626
• /
• 1992

Ironpentacarbonyl에 의한 니트로벤젠의 환원반응에 PEG를 상이동 촉매로 사용한 결과 상온에서 90% 이상의 아닐린 수율을 얻을 수 있었다. 니트로벤젠의 반응속도는 PEG의 사슬길이와 결합점의 수에 의존하였으며 NaOH의 농도가 높고 용매의 극성이 커질수록 증가하였다. 그러나 아닐린의 수율은 NaOH농도가 2N일때 최대였으며 그 이상의 농도에서는 감소하였다

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.48-52
• /
• 2004

Diffusion/penetration rates of finishing agents are not a major criterion in the design of low molecular weight finishing agents. However, in the case of polymeric finishing agents, high molecular weights result in large hydrodynamic volumes and diffusion/penetration of the finishing agent into the substrate may become a critical factor in the design of textile finishing agents. Thus the effect of the molecular weight of a model compound, polyethylene glycol, on its diffusion through a cellulose membrane or cotton fabric is studied. Diffusion experiments of polyethylene glycol of molecular weight 400, 1000, 2000, 4600, 8000, and 10000 through cellulose membrane or fabric was carried out in a glass U-tube diffusion apparatus and the half penetration times and the penetration coefficients were determined. Both the half penetration times and the penetration coefficients exhibited a significant change between molecular weight 2000 and 2500 as the molecular weight of polyethylene glycol increased, suggesting that there is a critical molecular weight above which diffusion/penetration becomes difficult. Based on this study on a model compound, it is suggested that polymeric textile finishing agents can be expected to exhibit similar behavior.

• 분석과학
• /
• 제27권5호
• /
• pp.228-233
• /
• 2014

전기방사된 나노섬유는 구조 및 비교적 손쉬운 제조공정으로 의료용 재료분야의 활용이 늘어나고 있다. 제조된 나노섬유는 블럭공중합체의 PCL-PEG diamin block copolymer의 혼합 비가 높을수록 말단에 결합된 아민기의 비가 높아진다. 생분해성 고분자인 폴리카프로락톤(Poly(e-caprolactone,PCL)과 폴리카프로락톤-폴리에틸렌글리콜-아민(Poly(e-caprolactone)-Poly(ethylen glycol-$NH_2$))의 블럭공중합체를 혼합한 비율을 조절하여 전기방사법으로 방사함으로써, 세포와의 친화도를 조절하였다. PEG and amine의 비율과 콜라겐의 영향으로 손상된 세포의 성장을 촉진시키는 효과를 기대할 수 있는 생분해성 복합 나노섬유를 제작 및 특성 분석하였다.

• 폴리머
• /
• 제25권2호
• /
• pp.208-217
• /
• 2001

테레프탈산 (terephthalic acid), 비스페놀에이 (bisphenol-A)와 에틸렌글리콜 (ethyleneglycol)로 제조된 PET/BPA 공중합체를 용융 압축시켜 필름을 만들어 얼음물에 급냉시켰다. 이 공중합체 필름을 모세관 레오메타로 고상 압출시켜 연신 필름을 만들었다. 이 연신된 필름의 수축율, 결정성, 형태학, 열적, 동역학적 및 기계적 특성을 조사하였다. 공중합체 필름의 융점은 순수 폴리에틸렌테레프탈레이트(PET)보다 낮게 나타났다. 또한 결정화도와 밀도는 연신비와 연신속도의 증가와 더불어 증가하였으나, 연신온도 증가와 더불어 감소하였다. 공중합체 필름의 인장강도와 인장탄성률은 연신비 증가와 더불어 증가하였고, 연신온도 증가에 따라 감소하였다. 연신된 공중합체 필름의 수축율은 연신비와 연신속도가 증가할수록 감소하였다.