• Korean Journal of Food Science and Technology
• /
• v.53 no.1
• /
• pp.12-18
• /
• 2021

The in vitro antioxidant activity of oregano seed fractions, fractionizing with 80% ethanol, n-hexane, ethyl acetate, n-butanol, and water, was evaluated, and their effects on edible oils were determined in corn oil at 180℃. The ethyl acetate fraction had the highest radical-scavenging activity. The ferric reducing antioxidant power activity and total phenol content of the ethyl acetate fraction were determined as 6,130 µmol ascorbic acid equivalents/g extract and 770 µmol tannic acid equivalents/g extract, respectively, which were significantly higher than those of the other fractions (p<0.05). Primary and secondary oxidation products in corn oil added with the ethyl acetate fraction of oregano seed significantly decreased by 1.5 and 1.26 times, respectively, compared with those in the control groups. The major volatile ingredients in the ethyl acetate fraction of oregano seeds were determined to be carvacrol, thymoquinone, and 3-cyclopentylcyl-cyclopentan-1-one. Ethyl acetate is a suitable solvent for extracting antioxidant compounds from oregano seeds and can be used as a natural antioxidant.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.151-154
• /
• 2002

분산염료는 1923년경 공업화된 이후 분산상태로 아세테이트 섬유 및 폴리에스테르 섬유 등의 소수성 섬유의 염색에 이용되고 있다. 이후 폴리에스터 섬유의 급격한 신장과 소비자 수요의 증가에 따라 분산염료는 총염료생산량의 50% 이상을 차지하고 있다[1]. 분산염료는 구조적으로 크게 안트라퀴논, 메틴, 니트로디페닐아민, 아조계로 구분된다. 그리고 구조에 친수성기를 가지고 있지 않으므로 물을 사용하여 행해지는 염색과정에서 균일하게 분산되지 않는 특성을 가지고 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.193-194
• /
• 2007

See Full Text

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.316-320
• /
• 2011

This study was conducted to investigate the antioxidant compounds and antioxidant activity on the dropwort (Oenanthe javanica) and its solvent fraction. The dropwort was extracted with 70% (v/v) ethanol, and then partitioned using the solvents of hexane, chloroform, ethyl acetate, butanol, and aqueous. The ethyl acetate fraction contained the highest phenolic and flavonoid of 240.61 mg GA eq/g and 105.57 mg catechin eq/g, followed by ethanol extract of 37.50 mg GA eq/g and 26.50 mg catechin eq/g, respectively. The DPPH radical scavenging activity ($IC_{50}$) on the solvent fractions increased in the order of ethyl acetate, butanol, ethanol extract, chloroform, aqueous, and hexane with 0.08, 0.58, 1.07, 2.43, 2.47, and 3.31 mg/mL, respectively. The ABTS radical scavenging activity was the highest value of 382 mg AA eq/g in ethyl acetate fraction. Reducing power and chelating effect on the ethanol extracts and its solvent fraction were in range of 0.23~0.75 and 0~32.01%, respectively. Hydroxyl radical scavenging activity ($IC_{50}$) was the lowest value of $26.71\;{\mu}g$/mL in ethyl acetate fraction.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.893-905
• /
• 2020

This study is a study on solubilization and emulsifying power of tocopheryl acetate using vegetable surfactants. High purity polyglyceryl-10 isostearate and polyglyceryl-10 oleate were mixed to synthesize a vegetable surfactant with excellent solubilizing power and emulsifying power. The mixed raw material was named Solubil EWG-1100. The appearance of this raw material was a pale yellowish paste with a specific smell, specific gravity of 1.12, and acid value of 0.085. The HLB value of this surfactant was calculated by the Griffin's equation with an average value of 15.17. The behavior of this surfactant to solubilize tocopheryl acetate was mechanically verified. The performance of solubilization was evaluated by a method of visual evaluation and was measured by a transmittance rate at 650 nm using a UV spectrophotometer. As a result, in the formulation using 3% ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate was required about 5 times of natural surfactant. In the formulation without ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate required about 7 times of natural surfactant. In addition, the concentration of surfactant required to make an emulsifivation 10 % of tocopheryl acetate was 1 wt% of Solubil EWG-1100, and the emulsified particle size was 3.5 mm in cream formula. In order to obtain stable and fine emulsified particles, it was found that as the concentration of tocopheryl acetate increased, the concentration of Solubil EWG-1100 also was to increase. As a result of testing the solubilizing power of the surfactant according to the pH various change, it showed stable solubilizing power in the acidic region of pH=3.2, the neutral region of pH=7.0, and the alkaline region of pH=11.8. As application, based on these results, it is expected that it can be widely applied to the cosmetics field that develops skin care prescriptions, sensitive skin products, and heavy dry skin products.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.10-17
• /
• 2004

Poly(vinyl acetate) (PVAc) nanoparticles were synthesized in oil/water miniemulsion polymerization in the presence of low amount of hexadecane as a cosurfactant. The nanoparticles were tested to apply as a drug carrier. The shape of nanoparticles was observed by scanning electron microscopy, and the average particle size and size distribution were examined by particle size analyzer. Inclusion of antibiotic drugs into the nanoparticles was confirmed by CHO, C=O, and OH peak of FT-IR. Size of the nanoparticles were adjusted between 80∼300 nm by changing the homogenization rate and amount of cosurfactant and surfactant. The monomer droplets prepared by miniemulsion method using a cosurfactant were homogeneous and stable compared with those prepared by conventional emulsion polymerization. This might be occurred due to the prevention of Ostwald ripening and coalescence between droplets by using hexadecane as a cosurfactant.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.370-381
• /
• 2015

In the system of poly(vinyl alcohol) (PVA)/dimethyl sulfoxide, the refractive index of polymer was very well matched to that of solvent and thus its scattered intensity could be minimized. After adding small amount of polystyrene latex particle (nominal diameter 200 nm), diffusion behavior of only probe particle was investigated against the concentration of polymer matrix by means of dynamic light scattering. The polymer concentration dependence of its reduced diffusion coefficient was able to be analysed with the stretched exponential function of the reduced concentration $C[{\eta}]$. In very dilute concentration regime, the depletion layer kept constant but at the early semi-dilute regime of $1{\leq}C[{\eta}]{\leq}2.5$, the concentration-dependent exponent of depletion layer ${\delta}$ was appeared to be -0.8 which was very close to theoretical one of -0.85. However it was also observed at the higher concentration that its layer thickness decreased more abruptly than theoretical expectation and this phenomenon was ascribed to Oosawa type attractive interaction between adjacent latex particles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.299-305
• /
• 2012

The objective of this paper is to obtain the basic data in order to develop an eco-friendly concrete through evaluation on the properties of polymer cement mortar and concrete using PVAc (Polyvinyl Acetate), as a kind of water-soluble polymer. For this purpose, the physical properties of cement mortar and concrete which does not contain the PVAc as the control batch were compared and analyzed with those using the PVAc. And then, the replacement amount of the PVAc was 3%, 6%, 9% and 12% by binder, respectively. And also, the properties of concrete using the PVAc were evaluated, by adding an antifoaming agent in order to control the air contents increasing with an increase of amount of polymer usage. As a result, in the case of polymer cement mortar using the PVAc, it presented that the compressive strength reduced, while the performance of flexural strength and drying shrinkage increased. When the replacement of the PVAc was 6% within concrete, the compressive, tensile, flexural strength and elastic modulus were increased.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.649-656
• /
• 2001

Miscibility of poly(4-vinylpyridine) (P4VP) blends with poly(vinyl acetate-co-vinyl alcohol) (VAc-VAL copolymers) was investigated as a function of comonomer composition of VAc-VAL copolymers. Differential scanning calorimetry (DSC) and thermo-optical microscopic (TOM) analysis confirmed that P4VP is miscible with VAc-VAL copolymers containing more than 30 mole% VAL. Fourier transform inflated (FT-IR) spectroscopic analysis revealed that the strong intermolecular hydrongen bonding interaction between the vinylpyridine and VAL hydroxyl group was formed. Theoretical phase diagram was constructed by the calculation using the Association model, a thermodynamic model for hydrogen-bonded polymer blend systems developed by Coleman et al. The calculated theoretical binodal phase diagrams were in good agreement with the experimentally determined cloud point curves.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1235-1242
• /
• 2019

In this study, prepolymer was synthesized through the reaction of isoporon diisocyanate (IPDI) and dimethylolbutanoic acid (DMBA) based on poly (tetramethylene ether) glycol (PTMG) for the synthesis of water-soluble polyurethane to be used as a leather surface coating applied with ethyl acetate and piperazine. Thereafter, the piperazine was chain-extended with 0.01 M, 0.03 M, 0.05 M, and 0.07 M in the water-dispersed resin, and the tensile strength, elongation, CV (cyclic voltammetry), and solvent resistance analysis were performed. Tensile strength of the prepared sample was measured at 5.422 kg_f/㎟ when the piperazine content was 0.07M, and elongation was measured as 587% when the piperazine was 0.01M. Solvent resistance analysis showed the same solvent resistance regardless of piperazine content, and the redox potential was changed according to piperazine content through CV measurement.