• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.253-258
• /
• 2011

Electro-mechanical coupling performance ($k_t$) of a 1-3 type Piezo-composite was analyzed numerically using FEM. The calculated physical properties of the PZT ceramics were compared with the experimental data and the accuracy of the numerical method was verified. Also the $k_t$ of the composite was analyzed with the vol% and the material properties of the constitutional parts, and the aspect ratio of the PZT rod. As the simulated results, the $k_t$ increased rapidly when the vol% of the PZT ceramics increased up to 30 vol% and saturated the constant value in the above region. And the composite using the soft matrix polymer than the hard one have the superior $k_t$ characteristics. The $k_t$ was greatly influenced by the aspect ratio of the PZT rod up to 30 vol% of PZT ceramics. To improve the $k_t$ characteristics, it is useful that the composite consist of the relatively flexible polymers and the PZT material having the excellent piezoelectric characteristics.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.392-395
• /
• 2003

Phosrhonium salt exchanged montmorillonites were prepared from a reaction between alkyl triphenyl phosponium bromide and Na$^{＋}$-montmorillonite. Epoxy-clay nanocomposites were also prepared by using cycloaliphtic epoxy, methyl tetrahydrophthalic anhydride as a hardener, and triphenyl butyl phosphonium bromide as an accelerator. TEM and XRD results suggested that clay minerals in the epoxy-montmorillonites composite were intercalated. Mechanical properties such as tensile modulus and strength were measured and the effect of nanocomposite formation was also discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.182-183
• /
• 2008

본 연구에서는 유전 손실이 낮고, 고분자(LCP)의 유전율을 높이기 위하여 (100-x)LCP(polymer)-xNPO(ceramic) 복합체 (x= 0, 10, 20, 30, 40, 50)의 유전 특성 및 미세구조를 연구하였다. LCP와 ceramic filler(NPO)는 Brabender Mixer를 사용하여 $300^{\circ}C$에서 혼합한 후, Hot press 사용하여 $300^{\circ}C$, 7ton 성형 압력으로 pellet 형태 $(2.5cm\times2.5cm\times0.1cm)$로 제조 하였다. LCP-NPO 복합 소재를 SEM을 통해 미세구조를 관찰하였고, 복합체의 유전 특성을 조사하였다.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.854-859
• /
• 2000

The synthesis of poly(N,N-dimethylamino ethyl methacrylate (DMAEMA)-block-poly(ethylene glycol) (PEG)) copolymer has been carried out and the block copolymer was characterized by FT-IR, DSC, and $^1$H-NMR. The formation of polymeric nanoaggregation was observed in the solution mixture of poly(DMAEMA) -block-PEG copolymer and poly (ethyl acrylamide) (EAAm) due to the intermolecular interaction via hydrogen bond between DMAEMA and poly(EAAm). The formation of polymeric nanoaggregation was observed above critical micelle concentration (CMC).

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.113-120
• /
• 2013

The melt intercalation to commercialize nanocomposites in a pilot scale was applied and the water absorption characteristics for polyamide/MMT nanocomposites manufactured by twin screw extruder was studied. As a result, water absorption decreased with the introduction of MMT and dimensional stability was improved. However, as water absorption increased, flexural strength and modulus were reduced. Therefore, the effect of MMT introduction on mechanical properties of nanocomposites was clearly observed, which may increase the level of strength by maintaining anti-water absorption property of nanocomposite.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.445-446
• /
• 2011

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.116.1-116
• /
• 2003

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.232-239
• /
• 2014

Poly(lactic acid)(PLA) nanocomposites containing various nanofillers were synthesized using the solution intercalation method. Organically modified bentonite clay (NSE), octadecylamine-graphene oxide (ODA-GO), and an NSE/ODA-GO complex were utilized as nanofillers in the fabrication of PLA hybrid films. PLA hybrid films with varying nanofiller contents in the range of 0-10 wt% were examined and compared in terms of their thermomechanical properties, morphologies, and oxygen permeabilities. Transmission electron microscopy (TEM) confirmed that most of the NSE and ODA-GO nanofillers were dispersed homogeneously throughout the PLA matrix on the nanoscale, although some agglomerate NSE/ODA-GO complex particles were also formed. Among the three nanofillers for PLA hybrid films, the NSE/ODA-GO complex showed the best improvement in film thermal stability. In contrast, NSE and ODA-GO exhibited the best improvement in tensile mechanical properties and oxygen barrier properties of the PLA hybrid films, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.275-276
• /
• 2008

통신기기가 고주파수화 함에 따라서 저유전 저손실 재료의 필요성이 증대되고 있으며, 세라믹/폴리머 복합재료를 고주파 회로 기판 소재로 이용하려는 관심이 증폭되고 있다. 본 연구에서는 저손실, 저유전율 특성을 구현하기 위해 $SiO_2$를 세라믹 필러로 복합물을 제작하였다. 평균 입자 크기가 16nm, $2.3{\mu}m$의 fumed 실리카와 평균 입자 크기 $1{\mu}m$, $4{\mu}m$의 fused 실리카를 사용하였다. 이 4종류 실리카를 사용하여 slurry를 제작하고 이를 활용하여 tape을 제작하였다. 제작된 복합체 tape을 적층하여 기판을 제작해 기판의 유전특성을 측정하였다. fumed 실리카의 경우 $SiO_2$ 10vol%이상에서는 균일한 tape성형이 어려워졌으며, 유전 손실이 fused 실리카와 비교하였을 때 큰 폭으로 증가하였다. fumed silica, fused silica 두 종류 모두 입도가 증가하면 유전손실이 증가하였다.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.247-252
• /
• 2010

This paper investigates the effects of the monomer ratios on the typical properties of polymer-modified mortars that contain methyl methacrylate-based latexes. Basic data are also obtained to develop appropriate latexes for cement modifiers. Polymer-modified mortars that contain methyl methacrylate latexes copolymerized with butyl acrylate or ethyl acrylate are prepared for different polymer-cement ratios. They are then tested to obtain the tensile and tensile adhesive strengthes of polymer-modified mortar with methyl methacrylate-based latexes. From the test results, the tensile strength of MB7 polymer-modified mortar was higher than normal cement mortar by a maximum of 94% with a 20% polymer-cement ratio, which was almost twice higher than normal. The tensile adhesive strength of the MB polymer-modified mortar was higher for higher MMA monomer contents and polymer-cement ratios, and increased up to four times than that of normal cement mortar. The basic properties of the polymer-modified mortars are more affected by the polymer-cement ratio than by the monomer ratio, and are improved over unmodified mortar.