• 제목/요약/키워드: 포화방지

검색결과 109건 처리시간 0.036초

Project of Dam Safety reinforcement on Gampo Dam (감포댐 안전성강화 사업)

  • Cheon, Geun Ho;Han, Yong Hun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.214-214
    • /
    • 2022
  • 감포댐은 2006년 준공하여 각종 시설 및 설비의 노후화가 진행중에 있으며, 최근 감포댐 인근 지역에서 발생한 경주지진(규모 5.8) 및 포항지진(규모 5.4)이 발생하여 지진시 시설물의 안전성에 대해 중요성이 대두되고 있었다. 이에 감포댐 안전성강화 사업을 추진하게 되었고, 주요 사업내용은 취수탑 관리교 내진보강, 댐체 심벽보강을 통한 댐체 안전성확보, 비상방류시설 개선이다. 취수탑 관리교는 교각단면의 변위연성도 및 교량받침에 의한 구조물 안전성 평가를 시행하였고, 단면강도는 모멘트-곡률해석법에서 탄성영역의 단면강도 대비 탄성지진력을 비교하여 안전성을 검토하였다. 검토결과 교량받침의 내진성능은 부족한 것으로 검토되어 유량제어형 멀티펌프와 안전잭을 이용한 변위제어 방식의 교량동시 인상공법이 가능하고 인상정밀도 ±0.5mm이내의 성능을 가진 교량인상공법 적용하여 보강을 하는 것으로 계획하였다. 댐체 심벽보강을 위해 먼저 전기비저항탐사를 수행하여 전기비저항대를 탐사하여 심벽부에서 포화대가 형성된 부위를 조사하였다. 그리고 댐 상·하류에 전극을 설치하고 전류를 발생시켜 측정 지점별 자기장을 측정을 통하여 댐체내 침투에 따른 유로 형성여부 파악을 위한 전자기장탐사를 시행하였다. 마지막으로 심벽 시추조사를 시행하여 공내수를 조사하였다. 조사결과 포화대의 위치 및 이상대가 다양한 것으로 나타났으며, 이는 불특정 지점에 연약대가 존재한다 판단하여 심벽부 보강계획을 전반적으로 적용하는 것으로 결정하였다. 비상방류시설은 최근 15년 실측자료의 홍수기(6~9월) 평균유입량을 적용하여 검토하였으며 검토결과 배제대상 높이 75%까지는 3.7일, 완전배제까지는 11.2일이 걸려 댐설계기준을 충족하는 것으로 검토되다. 다만 감포댐 비상방류시설이 하천제방과 직각방향으로 형성되어 있고, 하천의 폭이 좁아 과거 방류시에도 제방을 월류하는 것으로 조사되어 하천의 세굴을 방지하고 제방 안전성을 확보하기 위하여 비상방류시설에 감세공을 설치하고, 제방에 디플렉터 옹벽을 설치하는 것으로 계획하였다. 감세공은 2번에 걸친 감세효과로 방류시 하류바닥 및 옹벽 보호 효과가 큰 미국 USBR의 TypeVI를 적용하였으며, Flow-3D 모델링을 통하여 제방에 월류가 발생하지 않는 최적의 대안 옹벽규모를 산정하였다.

  • PDF

Development of Anti-windup Techniques for Cascade Control System (다단제어용 안티 와인드업 기술 개발)

  • Bae, Jeong Eun;Kim, Kyeong Hoon;Chu, Syng Chul;Heo, Jaepil;Lim, Sanghun;Sung, Su Whan
    • Korean Chemical Engineering Research
    • /
    • 제58권3호
    • /
    • pp.430-437
    • /
    • 2020
  • In this research, the anti-windup techniques for the cascade control system are newly developed. Cascade control system has an additional internal feedback control loop to reject disturbances better than the conventional control system. Remarkable difference between the conventional single-loop control system and the cascade control system is the interaction that the controller output saturation of the secondary control loop strongly affects the integral action of the primary control loop. In industry, local back calculation anti-windup method has been mainly used for each controller without considering the interaction between the two controllers. But it cannot eliminate the integral-windup of the primary controller originated from the saturation of the secondary controller output. To solve the problem, the two anti-windup techniques of the cascade conditional integration and the cascade back calculation are proposed in this research by extending the local anti-windup techniques for the single-loop control system to the cascade control system. Simulation confirmed that the proposed methods can effectively remove the integral windup of the primary controller caused by the saturation of the secondary controller output and show good control performances for various types of processes and controllers. If the reliability of the proposed methods is proved through the applications to real processes in the future, they would highly contribute to improving the control performances of the cascade control system in industry.

Thermal Behavior of Energy Pile Considering Ground Thermal Conductivity and Thermal Interference Between Piles (주변 지반의 열전도도를 고려한 PHC 에너지파일의 열 거동 및 파일 간 열 간섭 현상에 대한 수치해석 연구)

  • Go, Gyu Hyun;Yoon, Seok;Park, Do Won;Lee, Seung-Rae
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • 제33권6호
    • /
    • pp.2381-2391
    • /
    • 2013
  • In general, ground's thermal properties, types of heat exchanger, operational method, thermal interference between piles can be considered as key factors which affect the thermal performance of energy pile. This study focused on the effect of these factors on the performance by a numerical model reflecting a real ground condition. Depending on the degree of saturation of ground, pile's heat transfer rate showed a maximum difference of three times, and the thermal resistance of pile made a maximum difference of 8.7%. As for the type of heat exchanger effects on thermal performance, thermal efficiency of 3U type energy pile had a higher value than those of W and U types. The periodic operation (8 hours operation, 16 hours pause) can preserve about 20% of heat efficiency compared to continuous operation, and hence it has an advantage of preventing the thermal accumulation phenomenon. Thermal interference effect in group piles may vary depending on the ground condition because the extent decreases as the ground condition varies from saturated to dry. The optimal separation distance that maintains the decreasing rate of heat efficiency less than 1% was suggested as 3.2D in U type, 3.6D in W type, and 3.7D in 3U type in a general ground condition.

The Prediction of Flash point of Binary systems by Using Regression Analysis (회귀분석을 이용한 2성분계 인화점 예측)

  • Park, Sang-Hun;Lee, Myung-Ho;Cho, Young-Se;Na, Byoung-Gyun;Kim, Kyu-Hyun;Kim, Wan-Seop;Lee, Sung-Jin;Ha, Dong-Myeong
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 한국화재소방학회 2013년도 춘계학술대회 초록집
    • /
    • pp.41-41
    • /
    • 2013
  • 화학산업이 발달함에 따라 화학 산업 현장에서 사용되고 있는 가연성물질들의 여러 가지 화재 및 폭발 위험이 증가되고 있으며, 화재 및 폭발의 예방 안전을 위한 화학공정설계 및 대처에 있어, 물질의 연소특성치 데이터를 필요로 한다. 인화점은 가연성 액체를 다루는 공정에서 안전한 취급과 사고방지를 위해 중요한 자료가 되며, 화재의 위험을 나타내는 지표로서 가연성액체의 액면 가까이서 인화할 때 필요한 증기를 발산하는 액체의 최저온도, 그리고 가연성증기의 포화증기압이 공기와 혼합기체의 폭발한계 하한농도와 같게 되는 온도로 정의한다. 본 연구에서는 2성분계 혼합물에 대해 인화점을 측정하였고, 측정값을 Raoult의 법칙과 다중회귀분석(Multiple Regression)을 도입하여 이론값과 비교 하였다. 따라서 본 연구에서 제시된 방법론에 의해 아직까지 밝혀지지 않은 순수가연성액체와 가연성혼합물의 인화점을 예측하는 방법을 전개하고자 하며, 실험에서 찾고자하는 자료에 도움을 주고자 한다. 본 연구를 바탕으로 혼합물의 인화점 예측 방법과 실험에서 측정한 자료를 화재 및 폭발을 방지하는 기초 자료로 제공하고자하며, 산업현장에서 취급되고 있고 위험성 평가가 되지 않은 보다 많은 물질에 대한 이론 및 실험 연구에 활용 되도록 하는데 그 목적이 있다.

  • PDF

Load Following Operation Improvement by Governor Control Logic Modification of Thermal Power Plant (System Frequency Drop Prevention) (기력발전소 터빈조속기 제어로직 개선에 의한 발전기 부하추종성 향상 (계통주파수저하방지))

  • Lee, Jong-Ha;Kim, Tae-Woong
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • 제11권4호
    • /
    • pp.302-306
    • /
    • 2006
  • The improvement of load following operation of the thermal power plant is influenced to the electrical quality. Analysis of boiler, turbine, and governor system, and the study of control algorithm are necessarily preceded. The thermal power plant is operated by various control systems. In the case of faulty governor system, it takes long days to solve the problem and impossible to repair the mechanism without outage. A non-planned outage is taken into consideration because of economical power production. The paper introduces the followings; In case of system-frequency drop during long term, at 500MW thermal power plant, the generator output was drop. To clear this problem, the control logic is modified with analysis of trend and control algorithm. As a result system frequency drop is prevented during the long tenn and the electric grid operation is improved.

Permeability Characteristics of Geosynthetics Vertical Barrier Connections for the Prevention of Contaminants Diffusion (오염물질 확산방지를 위한 토목섬유 연직차수벽 연결부의 투수성능 평가)

  • Park, Jeong Jun
    • Journal of the Society of Disaster Information
    • /
    • 제18권1호
    • /
    • pp.1-9
    • /
    • 2022
  • Purpose: In this study, we used hydrophilic waterstop used in geosynthetics vertical barrier system to evaluate the performance of impermeability under sealing conditions. Method: ASTM D5887 and ASTM D6766 were applied to determine the capability of the connection during the geosynthetics vertical barrier system. Hydrophilic waterstop was saturated in each solution and the weight, thickness, and volume changes were analyzed over elapsed time. Hydrophilic waterstop was installed at the geosynthetics vertical barrier system connection to evaluate the permeability characteristics. Results: As the expansion reaction time of hydrophilic waterstop increased relatively under saline conditions, the decrease in permeability also showed a smaller decrease in fresh water. Furthermore, the method of engagement of the geosynthetics vertical barrier system showed somewhat better performance of the impermeability due to the large pressure resistance caused by the roll joint type than interlock type. Conclusion: In urban pollutants, which can estimate the outflow of pollutants such as oil storage facilities and industrial complexes, proactive response technologies that can prevent the contaminant diffusion can significantly reduce the damage.

Analysis and Processing of Driver's Biological Signal of Workload (작업 부하에 따른 운전자의 생체신호 처리 및 특성 분석)

  • Heo, Yun Seok;Lee, Jae-Cheon;Kim, Yoon Nyun
    • Journal of Korea Society of Industrial Information Systems
    • /
    • 제20권3호
    • /
    • pp.87-93
    • /
    • 2015
  • The accidents caused by drivers while driving are considered as the major causes along with other causes such as conditions of roads, weather and cars. In this study, we investigated the driver's workloads under three different driving conditions (Weather, Driving time zone, and Traffic density) through analyzing biological signals obtained from a car driving simulator system. The proposed method is able to detect R waves and R-R interval calculation in the ECG. Heart rate variability (HRV) was investigated for the time domain to determine the changes in driver's conditions.

Investigative Study on Proper Input Conditions of Numerical Model for Seepage Analysis (제방 침투 수치모형의 적정 입력조건 검토)

  • Im, Dong-Kyun;Kim, Kyu-Ho;Yeo, Hong-Koo;Kang, Jun-Gu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.1716-1720
    • /
    • 2006
  • 침투는 지반이 충적토로 구성되어 있는 제방의 파괴를 야기하는 중요한 원인이다. 침투 해석 수치모형은 제방 침투와 관련된 문제 해석과 방지기법 설계에 있어 매우 유용한 방법이나, 각각의 수치모형은 적용상 한계와 문제점을 내포하고 있다. 실제 지하수 흐름은 간극률, 입자형상 및 크기, 포화도 등과 같은 토질특성, 내부침식과 같은 역학적 특성, 점성과 동결융해 같은 열역학적 특성, 그리고 화학적 특성 등 다양한 인자의 영향을 받는다. 이러한 물리적 인자 이외에도 침투 수치해석은 외력조건, 격자 크기(element size), 그리고 시간 간격(time step interval) 등 입력조건에 영향을 받기 때문에 이들 설정에 대한 검토를 시행하여야 한다. 본 연구에서는 침투 수치모형의 적절한 입력조건 범위를 검토하였으며, 격자크기는 계산시간과 해석결과 등 수치모의의 효율성을 고려하였을 때 홍수위 혹은 제방고의 1/10이하로 결정하면 타당할 것으로 판단된다. 그리고 침투수치모형의 시간 간격은 외력조건을 고려하여 1시간 이내로 설정하는 것이 바람직할 것으로 판단된다. 본 연구결과는 침투해석 수치모의의 유의사항을 검토하여 해석결과에 대한 불확실성과 위험요소를 제거하는데 도움이 될 것으로 판단된다.

  • PDF

Development of Magnetic Torquer for Satellite Attitude Control (인공위성 자세제어용 Magnetic Torquer 개발)

  • Son, D.
    • Journal of the Korean Magnetics Society
    • /
    • 제18권2호
    • /
    • pp.54-57
    • /
    • 2008
  • Magnetic torquer, which uses torque between magnetic dipole moment and earth magnetic field, has been used to control attitude of satellites. In this work, we developed a magnetic torquer for small scientific satellite and test under environmental conditions of the satellite launching and orbital motion have been carried out. The developed magnetic torquer shows saturation magnetic dipole moment of $15Am^2$, linearity of 0.3 % in the range of ${\pm}12Am^2$, mass of 0.46 kg, and power consumption of 1 Watt at magnetic dipole moment of $10Am^2$.

Power-Minimizing DVFS Algorithm for a Video Decoder with Buffer Constraints (영상 디코더의 제한된 버퍼를 고려한 전력 최소화 DVFS 방식)

  • Jeong, Seung-Ho;Ahn, Hee-June
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • 제36권9B호
    • /
    • pp.1082-1091
    • /
    • 2011
  • Power-reduction techniques based on DVFS(Dynamic Voltage and Frequency Scaling) are crucial for lengthening operating times of battery powered mobile systems. This paper proposes an optimal DVFS scheduling algorithm for decoders with memory size limitation on display buffer, which is realistic constraints not properly touched in the previous works. Furthermore, we mathematically prove that the proposed algorithm is optimal in the limited display buffer and limited clock frequency model, and also can be used for feasibility check. Simulation results show the proposed algorithm outperformed the previous heuristic algorithms by 7% in average, and the performance of all algorithms using display buffers saturates at about 10 frame size.