• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.151-157
• /
• 2013

This study was conducted to investigate the effect of mature stages on quality of Rafito tomatoes (Lycopersicon esculentum Mill.) during storage at low temperature. Tomatoes grown in greenhouse were harvested at three different mature stages (turning, pink, and red), packaged with a 30-${\mu}m$-thick polyethylene film, and then stored at 5 and $10^{\circ}C$, respectively. The changes in firmness, soluble solids content (SSC), titratable acidity (TA), colour, lycopene content, decay, and chilling injury were measured on a weekly basis. After three weeks of storage, chilling injury and decay were found to have individually occurred at 5 and $10^{\circ}C$, respectively. As there was little change in quality at $5^{\circ}C$, it was concluded that red tomatoes could maintain their good quality for two weeks. The normal postharvest ripening was inhibited in the turning and pink tomatoes during storage at $5^{\circ}C$. The turning and pink tomatoes showed improved quality after two-week storage at $10^{\circ}C$. In particular, the turning fruits showed the highest firmness throughout the storage period. Furthermore, the red colour, SSC/TA, and lycopene content of the turning fruits reached the same levels as with the red fruits after two-week storage at $10^{\circ}C$. These results suggest that red tomatoes should be stored at $5^{\circ}C$ to inhibit decay, and that the optimum temperature for early-harvested tomato (turning and pink) is $10^{\circ}C$ for the ripening process after harvest.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.91-94
• /
• 1997

This experiment was carried out to investigate the effects of black P.E. film mulching by different sowing dates on the growth and yield of Achyranthes japonia NAKAI. Emergence rate and the growth increment were increased in black polyethylene (P.E.) film mulching of sowing date at April 1. Dried root yield was highest by 3,190kg/ha in black P.E. film mulching and earlist sowing at April 1 with 20% increase compared to that of non mulching at April 1 planting.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.20-25
• /
• 1994

This study was carried out to investigate the effect of temperature and daylength on the bolting of Angelica gigas Nakai for decreasing the rate of bolting.Seedlings were transplanted on early December to the PVC pot(1 /1000) in the greenhouse con­trolled the temperature of 15, 20 and $25^{\circ}C$, and the daylength of 8, 12, and 16hrs. Growth of aerial parts, bolting rate and root characteristics of A. gigas were investigated. Seedlings of A. gigas untreated with low temperature were nomally emerged, bolted and flowered in maturing stage. In this results, it was assumed that A. gigas was low sensitive to low temperature. The early growth stage was good at $20^{\circ}C\;and\;25^{\circ}C$, but the late growth was effective at $15^{\circ}C\;and\;20^{\circ}C$. The bolting rate was the highest at $20^{\circ}C$ while the root weight was the lowest. Although the bolting rate was high at $15^{\circ}C$, the yield was increased by the delay of bolting and flowering stage. The bolting rate was increased in the longer daylength and showed more sensitive to the daylength condition than to the temperature. Thus, A. gigas cultivated in gully field with cool temperature or under the shading light could be reduced could the bolting rate.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1109-1116
• /
• 2002

This study analyzed concentrations of volatile organic compounds (VOCs) produced from incineration of papers at $600^{\circ}C$. The papers used in this study included A4 papers (new, printed with ink-jet, printed with carbon), newspapers (printed with bean oil, printed with a general newspaper ink), packaging box, document envelope, single-use paper cup, and cosmetic tissue. Papers were heated from room temperature upto $600^{\circ}C$ providing air inside of the electric furnace and then they were oxidized for 80 minutes at $600^{\circ}C$ maintaining the same air supply. VOCs emitted from the incineration process were sampled using an air sampling pump and bags for 160 minutes and then the components and concentrations of the VOCs were analyzed by a CC-MS. The most prominent chemical structure of the Vous identified from incineration of the papers was furans and then furans were followed by aromatics and aliphatic alkenes. About 40% of the identified VOCs contained double bonds, which have relatively a high ozone (ground level) formation potential, within their molecular structure. Also, some cancer suspecting compounds like benzene, dichlorormethane and chloroform were identified.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.303-323
• /
• 2014

After TV Broadcasting service started, American Animation Industry changed dramatically. Through 1930th to 1940th, Major Animation Studios made every effort to adapt to new Animation production environment. Those efforts led rapid improvement of Animation again by succession of heritage in the golden age of American Animation. in spite of successful outcome, some critic like Bernard Oma blamed Animation on repeated chasing pattern, glamorized violence with exaggeration and humor caused by lack of idea. Nevertheless the decade passed by, achievement of the era still have influenced today. The animated films of the age have attractive power in comparison to today's works and Chuck Jones was a glamorous one of the age-leading masters. "Tom and Jerry" series, "Bugs Bunny", "Daffy Duck", and so on, he planned, designed characters and directed those masterpieces. In this study, episodes of "Tom and Jerry" that had been directed by Chuck Jones during 1963 and 1967 are analysed in the view point of direction style. In recently, Korean Animation Industry seems to be accumulated power for rising again by showing new animations that are adapted to new media. Thus, this study aims to give an idea for the new vision of Korean Animation through analysing Chuck Jones' Masterpieces.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.157-160
• /
• 2003

해마다 늘고 있는 토사유출희 인한 피해는 자연재해의 측면에서 매우 중요한 과제로 다루어지고 있으며, 토사유출에 의한 환경피해를 최소화하기 위해 토양유실량의 산정에 많은 연구가 진행되고 있다. 그러나 사면에서의 토양유실량 산정방법 및 산정된 결과에 대한 검증 역시 현실적으로 매우 어렵기 때문에 일반적으로 국내에서는 토양유실량산정을 위해 범용토양유실공식(Universal soil loss equation)을 사용하고 있다. 범용토양유실공식(USEL)은 실험적 근거가 미비한 국내실정에서 일반적으로 활용되고 있기 때문에 공식의 적용에 대한 다양한 실험적 연구가 필요하였다. 따라서 본 연구는 남한강 유역 여주-이포 구간을 대상으로 2002년 6월부터 2002년 10월까지 수행된 자연 상태에서의 토양침식실험과 실험지역의 USLE의 적용을 검토하였다. 토양침식실험을 통하여 산정된 침식율과 범용토양유실공식의 결과를 비교하였으며 USLE의 인자에 따른 토양유실량 산정 결과의 변화를 검토하고자 하였다. 남한강 유역에서의 토양침식 실험결과 자연 상태에서 연간토양유실량은 평균 12.54ton/acre/year이었으며, 최소 0.1ton/acre/year, 최대 34.06ton/acre/year로 나타났다. USLE에 의해 계산된 연간토양유실량은 17.15ton/acre/year로서 실험결과와는 많은 차이가 있었다. 이러한 차이는 토양유실량 산정에 필요한 다양한 조건을 정량화하는 과정에서 발생하는 것으로, USLE식에 활용되는 인자의 적용방법에 따라 커다란 차이를 보였다. 따라서 USLE에 의해 산정된 결과를 사용하기 위해서는 다양한 조건에 대한 검토가 이루어져야하며 USLE 산정에 관한 지속적인 실험적 연구가 이루어져야 하겠다. 증가할 것이다. 또한 부분육을 이용한 완전제품, 적색육제품, 유기농이나 별미식 제품과 같은 형태의 다양한 포장육 제품이 도입 될 것으로 생각되어진다.e in vitro SPF test method will be able to be used as an alternative method for in vivo SPF in case of lotion and cream. replica. A statistically significant improvement of Star Fruit Leaf Extract BG30-treated site was seen in decreased wrinkles. Star Fruit Leaf Extract BG30 results in clinically visible improvement in wrinkling when used topically for 5 weeks. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다. 향후에는 모바일 컨텐츠 파트너의 기업의 특성을 조사하여 관계성 변수와의

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.235-243
• /
• 2016

In the near future, many countries, including the Republic of Korea, will face a significant increase in low level radioactive waste (LLW) from nuclear power plant decommissioning. The purpose of this paper is to look at blending as a method for enhancing disposal options for low-level radioactive waste from the decommissioning of nuclear reactors. The 2007 U.S. Nuclear Regulatory Commission strategic assessment of the status of the U.S. LLW program identified the need to move to a risk-informed and performance-based regulatory approach for managing LLW. The strategic assessment identified blending waste of varying radionuclide concentrations as a potential means of enhancing options for LLW disposal. The NRC's position is that concentration averaging or blending can be performed in a way that does not diminish the overall safety of LLW disposal. The revised regulatory requirements for blending LLW are presented in the revised NRC Branch Technical Position for Concentration Averaging and Encapsulation (CA BTP 2015). The changes to the CA BTP that are the most significant for NPP operation, maintenance and decommissioning are reviewed in this paper and a potential application is identified for decommissioning waste in Korea. By far the largest volume of LLW from NPPs will come from decommissioning rather than operation. The large volumes in decommissioning present an opportunity for significant gains in disposal efficiency from blending and concentration averaging. The application of concentration averaging waste from a reactor bio-shield is also presented.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.79-85
• /
• 2010

This paper presents a preliminary study of roller types for chip seals based on aggregate retention performance. Chip seal test sections composed of single seals of granite 78M aggregate and CRS-2 emulsion were constructed using three different roller types: the pneumatic tire roller, steel wheel roller, and combination roller. In order to investigate the performance of these rollers effectively, it is critical to test chip seal samples obtained directly from field construction. Therefore, test sections were constructed on New Sandy Hill Church Road near Bailey, North Carolina. Chip seal samples obtained from these sections were used for laboratory testing. The aggregate retention performance was evaluated using the flip-over test (FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3). Based on the test results and visual observation, both the pneumatic roller and the combination roller used together are recommended to improve chip seal performance with the sequence of the pneumatic roller rolling first followed by the combination roller.

• The Korean Journal of Mycology
• /
• v.45 no.1
• /
• pp.74-82
• /
• 2017

Lisianthus (Eustoma grandiflorum) is a flowering ornamental plant used widely in Korea. In 2015, wilting, damping-off, stunting, and root rot symptoms were observed in lisianthus plants of Yeoju and Gimhae, Korea. Affected seedlings appeared yellow and showed poor development of root systems in the field and in nursery boxes. Furthermore, affected plants were yellow, stunted, and died at approximately 2-3 months after transplanting. Fusarium species were consistently isolated from the basal stems of diseased plants. Nine isolates were identified as Fusarium solani based on morphological characteristics. Macroconidia of isolates were relatively wide, straight-to-slightly curved, and microconidia formed in false heads on long monophialides. Abundant chlamydospores were produced at the middle or tips of hyphae. To confirm this identification, a molecular analysis of the translation elongation factor 1 alpha (TEF) and RNA polymerase II subunit (RPB2) genes was conducted. The sequences of TEF and RPB2 showed 99.2-99.9% and 98.0-98.1% similarity, respectively, to those of reference F. solani strains in NCBI GenBank. Pathogenicity was tested using root dipping inoculation of healthy lisianthus seedlings. Symptoms were observed within 7 days of inoculation only in inoculated plants. This is the first report of F. solani causing Fusarium root rot on lisianthus in Korea.

• International Journal of Highway Engineering
• /
• v.4 no.4 s.14
• /
• pp.23-39
• /
• 2002

This study dealt with developing a new approach for finding properties which might represent rut resistance characteristics of asphalt mixture under static loading. Two aggregates, a normal asphalt (pen 60-80) and 5 polymer-modified asphalts were used in preparation of 12 dense-graded mixtures. Marshall mix design was used in determination of OAC and each mixture at the OAC was prepared for a newly-developed Kim test on Marshall specimen (S=10cm) and gyratory specimen (S=15cm), and for wheel tracking test. Kim test used Marshall loading frame and specimens were conditioned for 30min at $60^{\circ}C$ before loading through Kim tester an apparatus consisting of a loading column and a specimen and column holder Diameter (D) of column was 3cm and 4cm with each column having different radius (r) of round cut at the bottom. The static load was applied at 50mm/min in axial direction of the specimen, not in diametral direction. The maximum load ($P_{max}$) and vertical deformation (y) at $P_{max}$ point were obtained from the test. A strength value was calculated based on the $P_{max}$ r, D and y by using the equation $K_D = 4P_{max}/{\pi}(D-2(r-\sqrt{2ry-y^2}))^2$ and is defined as the deformation strength ($kgf/cm^2$). The values of $P_{max}$/y and $K_I=K_D/y$ were also calculated. In general the leading column diameter and radius of round cut were significant factors affecting $K_D$ and $P_{max}$ values while specimen diameter was not. The statistical analyses showed the $K_D$ had the best correlation with rut depth and dynamic stability. The next best correlation was found from $P_{max}$ which was followed by $P_{max}$/y and $K_I$ in order.