• 자원리싸이클링
• /
• 제15권3호
• /
• pp.58-65
• /
• 2006

폐펄프를 흡착제로 $Ni^{2+}$가 함유된 폐수의 흡착 처리시 흡착제로 활용하는 방안을 검토하고자, 흡착질의 초기 농도, 온도, 흡착제인 폐펄프의 양, pH 등을 변화시키고, 공존물질의 농도 및 전처리의 영향 등의 요인을 고려하여 실험하였다. pH 에 따른 폐펄프의 Electrokinetic Potential pH 7.8 보다 낮은 영역에서는 양의 전하를 나타내고, 그 이상의 pH에서는 음의 전하를 나타내었다. 본 연구에서 폐펄프에 대한 $Ni^{2+}$의 흡착은 4시간 이내에 평형에 도달하였고, 흡착질인 $Ni^{2+}$의 초기 농도가 증가할수록 흡착량 역시 증가함을 보였다. 온도가 증가함에 따라 흡착량이 감소하여 흡착반응은 발열반응의 양상을 보였으며 이를 열역학적으로 고찰하였다. 또한 흡착제인 폐펄프의 양이 증가함에 따라 흡착량이 증가하였으며, pH $3{\sim}6$ 영역에서 pH 가 증가함에 따라 흡착량이 증가함을 보였는데 이는 폐펄프의 표면전위의 pH에 따른 변화양상과도 일치하는 결과였다. 공존물질인 $KNO_3$의 농도가 증가함에 따라 $Ni^{2+}$ 흡착량이 감소함을 보였고, NaOH 로 페펄프를 전처리한 후 흡착실험을 한 결과 전반적으로 NaOH 의 농도가 상승함에 따라 흡착률이 증가하는 것으로 관찰되었으나 그 값이 어느 한도 이상일 경우 오히려 흡착률이 감소하는 것으로 파악되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.291-298
• /
• 2006

• 자원리싸이클링
• /
• 제4권4호
• /
• pp.59-69
• /
• 1995

분진 중에 함유된 Zn, Pb, Fe 등의 유가 금속을 회수하기 위해 폐타이어를 건류하여 만든 건류탄소를 환원제로 이용하여 재활용하고자 하였으며 또한 분진을 Pelletizing 하거나 Briquetting해서 환원 처리할 때, 공해 발생과 작업상의 단점을 보완하기 위하여 제지공장에서 발생하는 폐펄프와 분진 및 건류탄소를 소정의 비율로 혼합한 후 성형한 다음 통기도 및 압축강도실험 등을 한 결과 다음과 같은 결론을 얻었다. 동일한 건류탄소 첨가량에서 결합제로 사용한 폐펄프의 첨가량이 증가할수록 통기도는 증가하며 이는 시편내 Porosiaty에 기인한 영향이라 생각되며, 동일 첨가량의 폐펄프에서 건류탄소의 첨가량이 증가할수록 통기도는 증가하는 경향을 보이며 압축강도는 건류탄소의 비율과 소결온도에 따라 증가 감소의 현상이 다소 상반되는 결과가 나타났다. 건류탄소 20%, 폐펄프 10%를 첨가하여 만든 Briguetting 시료를 X-선 회절분석 결과 $800^{\circ}C$에서는 ZnO와 $Fe_3$$O_4$가 조사되었으나 $1000^{\circ}C$ 이상에서는 ZnO와 $Fe_3$$O_4$를 확인할 수 없었다. $1000^{\circ}C$에서 소결실험을 한 결과 아연, 철산화물이 분해 증발하여 아연품위가 62%인 조산화아연물을 얻을 수 있었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.340-349
• /
• 2007

• 펄프종이기술
• /
• 제32권4호
• /
• pp.74-80
• /
• 2000

A series of studies on nitric-acid pulping of municipal recycled waste papers were carried out to substitute the bleached chemical pulp imported for producing printing paper as well as to use its solidified spent-liquor as fertilizer. The first experiment was carried out to find the optimum treatment conditions such as pulp consistency, nitric acid charge and temperature in $HNO_3$-alkali pulping process. The results obtained were as follows: 1. Some selective delignification of OCC pulp was conducted by $HNO_3$-alkali process. The higher the temperature and concentration of nitric acid, the lower the pulp yield and kappa number of treated pulp. while its brightness was increased. 2. The higher consistency required the stronger mixing in case of more than 5% pulp. 3. In the laboratory, the suitable $HNO_3$-treating condition seemed to be less than 6% consistency, lower than 500% $HNO_3$charge on pulp and lower than $100^{\circ}C$ in cooking temperature. 4. The spent liquor with 1.77% N-content seemed to be slow-release nitrogen fertilizer suitable for agriculture.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.27-33
• /
• 2014

거대억새에 폐목재 칩과 펄프슬러리를 첨가하여 제작한 식생기반재의 특성에 대해서 검토하였다. 공극률은 펄프슬러리의 첨가량 증가와 함께 증가하였지만, 목재칩과 펄라이트 첨가량 증가와 함께 다소 감소하였다. 투수계수는 각 다른 원료를 이용하여 혼합한 조건에서 거대억새 첨가량이 적을수록 낮게 나타났다. 토양경도는 거대억새 첨가비율이 낮을수록, 펄프슬러리, 목재 칩, 펄라이트의 첨가비율이 높아질수록 높게 나타났다. 박리강도는 모든 조건에서 거대억새 첨가량의 적을수록 낮았다. 수소이온농도(pH)는 전반적으로 약알칼리성으로 나타났다. 휨파괴계수는 전체적으로 각 조건별로 거대억새의 첨가율이 적을수록 높게 나타났다.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.44-49
• /
• 2014

The mushroom cultured waste(MCW) from cork oak was evaluated as the raw material for bioethanol production. For enzymatic hydrolysis, cellulase cocktails (Celluclast 1.5L and Novozym 188) was used for polysaccharides to monosaccharides conversion. Compared with sound cork oak woodmeal, woodmeal from MCW showed higher cellulose to glucose conversion. To improve polysaccharides to monosaccharides conversion, pretreatment by sodium hydroxide was applied. Even though more xylan and lignin were removed in woodmeal of MCW than that of cork oak, concentration of glucose was higher from sodium hydroxide treated cork oak woodmeal (51.3 g/L) than treated MCW woodmeal (41.6 g/L).

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.222-228
• /
• 2008

The chemical composition and thermal, crystal characterization of oak mushroom waste were investigated in comparison with those normal oak wood for utilization of cellulose from oak mushroom waste. The oak mushroom waste contained a higher percentage of ash, and hot water extractives than oak wood. This results indicated that the materials inside the body are easily decomposed during the oak mushroom cultivation. The lower percentage of holocellulose and a-cellulose of oak mushroom waste caused by fungal decomposition too. Whereas, the thermal decomposition behavior and crystallinity of oak mushroom waste was similar to that of normal oak wood, which indicated that the cellulose characterization of oak mushroom waste is resistant to fungal decomposition. In additionally, a degree of polymerization of oak mushroom waste must be investigate for examination of cellulose crystalline characterization, especially.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.9-19
• /
• 2013

This research was performed to make functional papers by using the waste of herbal medicine such as Astragalus membranaceus, Angelica acutiloba, and Artemisia capillaris as additives, and to evaluate their physical and optical properties of the manufactured paper. The physical and optical properties were decreased with the increase of the amount of herbal medicine. Of those manufactured papers, the functional paper with Artemisia capillaris showed the dramatic decrease in its physical properties. Adding the herbal medicine waste as additives developed the aesthetic pattern on the surface of the manufactured paper. The paper showing the black pattern on white surface was most favored. Different patterns could be made by changing the size of fibers and the amount of wastes. There was odor emitted from the paper due to the herbal medicine waste, which make the paper to have a potential for the diverse purpose. The herbal medicine waste can be applied to replace weighting agents in the manufacturing process of paper or used for the fuctional additives, resulting in the reduce of the quantity of a pulp consumed. The paper with 10-20% Angelica acutiloba waste were thought to have the most excellent quality on the process point of view.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.