• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.58-65
• /
• 2006

The applicability of the waste pulp which produced in the paper recycling process as an adsorbent for the treatment of $Ni^{2+}$ ion in wastewater has been investigated taking the initial concentration of adsorbate, temperature, the amount of adsorbent, and solution pH as the experimental variables. In addition, the effect of the concentration of coexisting solute and pre-treatment of adsorbent on the adsorbability of $Ni^{2+}$ ion were also examined. The electrokinetic potential of waste pulp was observed to be positive below pH 7.8 and negative above this pH. The adsorption reaction of $Ni^{2+}$ ion reached its equilibrium within 4 hours after the reaction was initiated and the adsorbed amount of adsorbate was found to increase with its initial concentration. The adsorbability of $Ni^{2+}$ was raised with temperature so that its adsorption reaction was considered to be exothermic, which was substantiated by thermodynamic calculation. Also, the adsorbed amount of $Ni^{2+}$ was raised with the amount of waste pulp and with pH in the range of pH $3{\sim}6$. This behavior of the adsorption of $Ni^{2+}$ according to the solution pH was well agreed with the electrokinetic characteristics of waste pulp in solution. The amount of coexisting solute was observed to reversely affect on the $Ni^{2+}$ adsorption onto waste pulp under the experimental conditions. With regard to the pre-treatment of adsorbent with NaOH, the adsorbability of $Ni^{2+}$ was increased with the concentration of NaOH to a certain extent. However, it was found to decrease contrarily when the concentration of NaOH became too high.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.291-298
• /
• 2006

• Resources Recycling
• /
• v.4 no.4
• /
• pp.59-69
• /
• 1995

Distillation oI the dust generated during waste tue pyrolysis was perIomerl to rccover valuable metal sucll as zlnc. lead and iron. Pemcahilily and carnprcssivc tests were pursucd to ahlain the basic dala for cslraclian of zinc from the slntering propcrtp ol stccl making dusts and distilled carhon of waste tires as wcll as wastc pulp sludge mixlure hr~quet were investigated at various sinlcring lempcraturcs. Permeablllly rncieased with increastng amount of waste pulp in specil~cd istilled carhon due tn the fnrmat~ono f porusily in lhe sample TIE co~npress~vsctr ength showed the vanous values wlth different amDunl of dislilled-carhon adrlit~nilsa nd at diIIerenl sinlering tcmpcralures. X-ray diffifraction anvlyscs oI a hnquet rn~rhtre of steelmaking dusts(20Q didilled carhon and 10% waste pulp sblered ;>I SOOT) showcd thal the briquet consisted ot ZnO and Fc,O.,, hut was not found at the hriguet rintered at over 10OO'C. Crude zinc oxide sintered a1 IOOOC contained OZA Zn.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.340-349
• /
• 2007

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.74-80
• /
• 2000

A series of studies on nitric-acid pulping of municipal recycled waste papers were carried out to substitute the bleached chemical pulp imported for producing printing paper as well as to use its solidified spent-liquor as fertilizer. The first experiment was carried out to find the optimum treatment conditions such as pulp consistency, nitric acid charge and temperature in $HNO_3$-alkali pulping process. The results obtained were as follows: 1. Some selective delignification of OCC pulp was conducted by $HNO_3$-alkali process. The higher the temperature and concentration of nitric acid, the lower the pulp yield and kappa number of treated pulp. while its brightness was increased. 2. The higher consistency required the stronger mixing in case of more than 5% pulp. 3. In the laboratory, the suitable $HNO_3$-treating condition seemed to be less than 6% consistency, lower than 500% $HNO_3$charge on pulp and lower than $100^{\circ}C$ in cooking temperature. 4. The spent liquor with 1.77% N-content seemed to be slow-release nitrogen fertilizer suitable for agriculture.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.27-33
• /
• 2014

The characteristic of vegetation mat prepared from miscanthus, waste wood chip, perlite and pulp slurry was investigated. The pore rate was increased with amount of pulp slurry. The hydraulic conductivity decreased with the amount of miscanthus in the condition mixed with each other raw materials. With the miscanthus amount, the soil hardness was increased. The peel strength decreased with the mount of miscanthus amount in all case. Hydrogen ion concentration (pH) was the overall alkaline. The MOR of miscanthus based vegetation mat was decreased with the amount miscanthust.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.44-49
• /
• 2014

The mushroom cultured waste(MCW) from cork oak was evaluated as the raw material for bioethanol production. For enzymatic hydrolysis, cellulase cocktails (Celluclast 1.5L and Novozym 188) was used for polysaccharides to monosaccharides conversion. Compared with sound cork oak woodmeal, woodmeal from MCW showed higher cellulose to glucose conversion. To improve polysaccharides to monosaccharides conversion, pretreatment by sodium hydroxide was applied. Even though more xylan and lignin were removed in woodmeal of MCW than that of cork oak, concentration of glucose was higher from sodium hydroxide treated cork oak woodmeal (51.3 g/L) than treated MCW woodmeal (41.6 g/L).

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.222-228
• /
• 2008

The chemical composition and thermal, crystal characterization of oak mushroom waste were investigated in comparison with those normal oak wood for utilization of cellulose from oak mushroom waste. The oak mushroom waste contained a higher percentage of ash, and hot water extractives than oak wood. This results indicated that the materials inside the body are easily decomposed during the oak mushroom cultivation. The lower percentage of holocellulose and a-cellulose of oak mushroom waste caused by fungal decomposition too. Whereas, the thermal decomposition behavior and crystallinity of oak mushroom waste was similar to that of normal oak wood, which indicated that the cellulose characterization of oak mushroom waste is resistant to fungal decomposition. In additionally, a degree of polymerization of oak mushroom waste must be investigate for examination of cellulose crystalline characterization, especially.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.9-19
• /
• 2013

This research was performed to make functional papers by using the waste of herbal medicine such as Astragalus membranaceus, Angelica acutiloba, and Artemisia capillaris as additives, and to evaluate their physical and optical properties of the manufactured paper. The physical and optical properties were decreased with the increase of the amount of herbal medicine. Of those manufactured papers, the functional paper with Artemisia capillaris showed the dramatic decrease in its physical properties. Adding the herbal medicine waste as additives developed the aesthetic pattern on the surface of the manufactured paper. The paper showing the black pattern on white surface was most favored. Different patterns could be made by changing the size of fibers and the amount of wastes. There was odor emitted from the paper due to the herbal medicine waste, which make the paper to have a potential for the diverse purpose. The herbal medicine waste can be applied to replace weighting agents in the manufacturing process of paper or used for the fuctional additives, resulting in the reduce of the quantity of a pulp consumed. The paper with 10-20% Angelica acutiloba waste were thought to have the most excellent quality on the process point of view.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.