• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.618-623
• /
• 2011

A pressure control law to regulate pressure of gas generator is suggested. To design a model based control law, the governing equation which is consisted of Robert and conservation equation is built and verified through the ground burning test. PID and nonlinear adaptive control laws are designed to evaluate the loop response characteristics under the system which has varying eigen properties as combustor volume is increased. It is suggested that new approach, gain scheduling design, is required to overcome the defects identified from numerical simulation results of the two control laws. The newly suggested scheme showed good control performance even under disturbances and measurement noise.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.15-21
• /
• 2009

In this paper, we consider the design problem of robust stabilization and robust guaranteed cost state feedback controller for discrete-time singular systems with parameter uncertainties by LMI(linear matrix inequality) approach without semi-definite condition and decomposition of system matrices. The objective of robust stabilization controller is to construct a state feedback controller such that the closed-loop system is regular, causal, and stable. In the case of robust guaranteed cost control, the optimal value of guaranteed cost and controller design method are presented on the basis of robust stabilization control technique. Finally, a numerical example is provided to show the validity of the design methods.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.15-22
• /
• 2005

In this paper, we propose a PID-PD controller and its tuning method to be modified form of PID controller that consist of the affine set of PID and PI-PD controller by analyzing relation between these controllers. The proposed tuning method controls the closed-loop system to locate between the step responses of system controlled by PID and PI-PD controller. The controller is designed by the optimum tuning method to minimize the proposed specific cost functions. Its effectiveness is examined by the case studies and their analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.564-570
• /
• 2003

This paper presents an adaptive fuzzy control scheme for nonlinear helicopter system which has uncertainty or unknown variations in parameters. The proposed adaptive fuzzy controller is a model reference adaptive controller. The parameters of fuzzy controller are adjusted so that the plant output tracks the reference model output. It is shown that the adaptive law guarantees the stability of the closed-loop system by using Lyapunov function. Several experiments with a small model helicopter having parameter variations are performed to show the usefulness of the proposed adaptive fuzzy controller.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.139-146
• /
• 2015

This paper presents the solution to model matching of switched asynchronous sequential machines by corrective control. We propose a model of switched asynchronous sequential machines, in which the system can have different dynamics of asynchronous machines governed by a pre-determined sequence of switching. The control objective is to derive a corrective control law so that the stable state behavior of the closed-loop system can match that of a prescribed model. A new skeleton matrix is defined to represent the reachability of the switched asynchronous machine, and a novel control scheme is presented that interweaves the switching signal and the corrective control procedure. A design algorithm for the proposed controller is illustrated in a case study.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.401-412
• /
• 2005

인터넷을 통한 정보 전달 방법은 Ethernet과 ATM, CAN과 같은 다양한 통신 전달 프로토콜 및 방법을 통해 이루어지고 있다. 현재 연구된 네트웍상의 시간 지연 현상에 대한 연구는 일부네트웍 모델을 바탕으로 연구되고 있으나 다양한 통신 환경 하에서 발생하는 시간 지연 현상에 대해 최적의 모델링 방법을 제시해 주고 있지 못하고 있다. 따라서 다양한 네트웍 환경에 적합하도록 인터넷기반 비동기 샘플치 시스템 모델에 대한 연구가 필요하다. 아울러 인터넷을 통해 구성된 폐루프 시스템은 기존 제어 시스템과 다른 동작 특성과 외란 특성을 가지므로 인터넷 환경에 적합하게 설계된 견실 제어 방법이 필요하다. 따라서 안정성이 극히 요구되는 각종 산업기기 등에 대한 웹기반 정밀 원격 제어를 원활히 수행하기 위해서는 웹 환경에 최적화된 강인 제어 이론 개발이 필요하다. 따라서, 본 논문에서는 원격지 플랜트에 대한 실시간 원격 제어를 안정적 및 효율적으로 수행하도록 인터넷상의 데이터 전송시 시간 지연 현상 분석 및 인터넷 기반 제어시스템의 전달 특성 분석하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.15-21
• /
• 2000

This paper presents the modeling method of $3\Phi$ phase-controlled rectifier for the DC motor drive in MATLAB/SIMULINK environment. This method has no need to extend the system mathematically and thus it's easy to integrate the various systems. The whole model consists of $3\Phi$ phase-controlled rectifier block, DC motor block and speed/current controller block. The simulation results show that the model outputs are almost similar to those of the real system and therefore that the presented method is suitable for the research of the closed-loop controlled power electronic systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.173-181
• /
• 2014

This paper addresses the problem of model matching control for a class of systems modeled as input/output asynchronous sequential machines. Based on the feedback control scheme, we design a corrective controller that compensates the behavior of the closed-loop system so as to match a reference model. Whereas the former studies use state observers and the output burst for designing a controller, the present research needs neither the observer nor the output burst in controller design. We define the 'output equivalent machine' of the considered machine to describe the existence condition and the construction algorithm for the proposed controller. A case study is provided to show the operation of the proposed corrective controller.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.106-119
• /
• 2020

In this paper, we propose a control scheme for quadrotor system using a pole placement method. When using a state feedback controller, a lot of trial and error in selection of control gains are often required to improve system performance. In order to relax this complicated process, we analyze the closed-loop system associated with control gains. Then, we present a control gain selection algorithm for control gains using a pole placement method to improve the system performance. The proposed control method is applied to the actual quadrotor system to illustrate the validity of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2274-2276
• /
• 2001

본 논문에서는 미세 구조물 가공 기술(MEMS)로 제작된 실리콘 자이로스코프를 위한 폐루프 제어기를 주파수 가중 $H_{\infty}$ 제어 기법과 주파수 가중 모델 축소 기법을 이용하여 설계하였다. 실리콘 자이로스코프는 수 kHz 대의 공진 특성을 이용하여 각속도를 측정하는 센서로서, 공진 주파수 영역의 특성이 매우 중요하므로 주파수 영역을 고려하고 공정 오차를 감안한 주파수 가중 $H_{\infty}$ 제어기가 필요하다. 본 논문에서는 고차 강인 제어기의 회로적 구현과 ASIC화가 가능하도록 하기 위해, 주파수 가중 모델 축소 기법을 이용하여 공진 주파수 영역에서 성능을 유지하는 저차 제어기를 설계하였으며, 시뮬레이션을 통해 기존의 제어기 및 고차 제어기와 성능을 비교하였다.