• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.242-249
• /
• 1997

Environmental control operations have been considerably contributed to the reduction of labor cost in both plastic film and glass greenhouses since government supported projects were begun. However, some problems are still remaining on the optimal environmental control and excessive operation due to an inflexible software regulating ventilation gear - reducers. The unadjustable software caused the damage of ventilation system, resulting in heat stresses of crops. This study was performed to develop a ventilation software controlling the vent opening level, opening sequence, based on the wind direction, and control interval according to the difference between ambient and set- up temperatures. The software included a beeper system alarming urgent cases, while a manager was remote from the greenhouse. A compatible hardware with the software was also developed by using a low-cost diffused DSP controller.

• Journal of Mushroom
• /
• v.13 no.4
• /
• pp.310-313
• /
• 2015

This study was carried out to re-use the post-harvest substrate of Pleurotus pulmonarius. In this study, we used two mixing ratio. First, a mixing ratio is developed by Gangwon Province Agriculturl Research and Extension Services[Poplar sawdust(10)+Cottonseed hull(50)+Cottonseed mal(20)+Beet pulp(20)]. Second, mixing ratio is developed by farmers[Poplar sawdust(60)+Cottonseed hull(10)+Cottonseed mal(10)+Beet pulp(20)]. First mixing ratio research results, Hosan was no difference in the yield by 30%, Yield of the Hwasan has increased by 20%. Second mixing ratio research results, Hosan was no difference in the yield by 20%. However, Hwasan has decreased.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.274-280
• /
• 2000

The fact that error probability is higher in wireless communication environment than the one in a fixed network makes it inappropriate to apply the same DLC (Data Link Control) protocol used in a wireline network to a wireless network. And since the existing DLC protocol for wireless network was optimized for low-rate data service, it is not suitable for a wireless network environment which should support high-speed and multimedia traffic. Therefore it is desperate to have a new DLC protocol for todays wireless mobile communication environment. In this paper, we propose an error control scheme in WATM (Wireless Asynchronous Transfer Mode) environment. which supportsmultiple traffic attributes, high-speed, multimedia data service. In this paper we modified the existing ASR ARQ (Adaptive Selective Repeat Automatic Repeat Request) protocol where cells exceeding maximum allowable delay range are discarded. And adding FEC (Forward Error Correction) for delay-sensitive traffic resulted in smaller increase of transmission delay.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.192-200
• /
• 2005

In this paper, an improved User Parameter Control (UPC) algorithm is proposed for controlling traffic in ATM networks. The present algorithm consists of Cell Buffer, Red Token Pool, Green Token Pool, and Spacer. A token is generated at a certain time period, and the tokens are consumed one each time a cell arrives. At this time, if the delay element, named Spacer, is empty, the cell comes into the network. On the other hand, if Spacer is not empty, the cell cannot come into the network. In addition, in the case that tokens do not exist in Token Pool, the corresponding cell is thrown away The arbitrary function of the token used in this paper is removed. Instead, the token is used only to control network traffic. This research proposes new UPC Algorithm to improve the current cell delay rate and cell loss rate by dynamically adopting the delay element, named Spacer, with respect to the traffic condition, which is different from controlling that the cell comes into the network after a certain delay time period.

• Journal of Korea Foresty Energy
• /
• v.23 no.2
• /
• pp.29-33
• /
• 2004

This study was carried out to find out safety disposal methods of waste CCA treated wood. The heavy metals of remnant were analyzed after combustion of CCA treated wood at different temperatures. Arsenic volatilized temperature was detected. The removal rate of heavy metals by acid in the ash were examined. Through this study, we could conclude that in order to protect volatilize arsenic, combustion of CCA treated wood should be do under the $300^{\circ}C$. But when CCA treated wood combustion under $300^{\circ}C$, it's weight-loss rate was $55\%$, so land reclamation dependence will be increased. When CCA treated wood combustion at high temperature, the land reclamation dependence could be reduced, but the arsenic that volatilize into the atmosphere should be captured. When it bums with high temperature, the ash contains lots of copper and chromium, so removal of heavy metals should be conducted.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.365-371
• /
• 2020

In this study, in order to recycle the stems of opuntia cactus discarded after harvesting the fruit, the cactus stems were powdered and applied as a cement-based admixture. The powder of cactus stem was mixed into the mortar, and its effect on the fresh properties and strength of the mortar was studied. The results were compared with the properties of mortars produced by mixing with a retarder sugar and a viscosity agent methyl-cellulose, which are conventional saccharide-based admixtures. Based on the test results, the cactus stem powder did not clearly show the effect as a retarding agent, whereas the flow and the air content were similar to those of the mortar mixed with methyl-cellulose. This indicated that the cactus stem powder can be used as a viscosity agent. It was found that the strength of the mortar tended to increase when the mixing ratio of the cactus stem powder was lower than 0.3%.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.147-153
• /
• 2010

The recycling of demolished concrete as an alternative source of coarse aggregates for the production of new concrete can help to solve the growing waste disposal crisis and the problem of the depletion of natural aggregates. The purpose of this study is to investigate the chloride migration of recycled aggregate concrete containing pozzolanic materials by the chloride migration coefficient. The specimens were made with recycled coarse aggregate at various replacement ratios (10, 30, 50%) and metakaolin, blast furnace slag, and fly ash is replaced for recycled concrete with a mixing ratio of 20%. The major results are as follows. 1) The compressive strength of recycled aggregate concrete containing pozzolanic materials increases as the curing age and chloride diffusivity decreases. 2) When the replacement ratio of recycled coarse aggregate is 30%, the chloride migration coefficient of recycled concrete containing blast furnace slag or metakaolin that shows a value similar to or lower than that of plain concrete at all ages.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.508-513
• /
• 2011

Hemp is known as one of the most productive and useful plants, which grows quickly in a moderate climate with only moderate water and fertilizer. Traditionally in Korea, hemp bast is used to natural fibres, and remaining such as stem and root is treated as waste. Those of hemp by-products can be transformed to bio fuel such as bio-oil and activated carbon. To understand pyrolysis characteristics, thermogravimetric analysis were carried out in TGA, in which hemp by-products were mostly decomposed at the temperature range of $270{\sim}370^{\circ}C$. The corresponding kinetic parameters including activation energy and pre-exponential factor were determined by differential method over the degree of conversions. The values of activation energies for pyrolysis were increased as the conversion increased from 10 to 90%.

• Journal of Chest Surgery
• /
• v.34 no.12
• /
• pp.917-923
• /
• 2001

Background : Bronchial sleeve resection for centrally located primary lung cancer is a lung-parenchyma-sparing operation in patients whose predicted postoperative lung function is expected to diminished markedly. Because of its potential bronchial anastomotic complications, it is considered to be an alternative to pneumonectomy. However, since sleeve lobectomy yielded survival results equal to at least those of pneumonectomy, as well as better functional results, it became and accepted standard procedure for patients with lung cancer who have anatomically suitable tumors, regardless of lung function. In this study, from analyzing of occurrence rate of postoperative complication and survival rate, we wish to investigate the validity of sleeve resection for primary lung cancer. Material and Method : From January 1989 to December 1998, 45 bronchial sleeve resections were carried out in the Department of Thoracic Surgery of Seoul National University Hospital. We included 40 men and 5 women, whose ages ranged from 23 to 72 years with mean age of 57 years. Histologic type was squamous cell carcinoma in 35 patients, adenocarcinoma in 7, and adenosquamous cell carcinoma in 1 patients. Right upper lobectomy was peformed in 24 patients, left upper lobectomy in 11, left lower lobectomy in 3, right lower lobectomy in 1, right middle lobecomy and right lower lobectomy in 3, right upper lobectomy and right middle lobecomy in 2, and left pneumonectomy in 1 patient. Postoperative stage was Ib in 11, IIa in 3, IIb in 16, IIIa in 13, and IIIb in 2 patients. Result: Postoperative complications were as follows; atelectasis in 9, persistent air leakage for more than 7 days was in 7 patients, prolonged pleural effusion for more than 2 weeks in 7, pneumonia in 2, chylothorax in 1, and disruption of anastomosis in 1. Hospital mortality was in 3 patients. During follow-up period, bronchial stricture at anastomotic site were found in 7 patients under bronchoscopy, Average follow-up duration of survivals(n=42) was 35.5$\pm$29 months. All of stage I patients were survived, and 3 year survival rate of stage II and III patients were 63%, 21%, respectively. According to Nstage, all of N0 patients were survived and 3 year survival rates of Nl and N2 were 63% and 28% respectively. Conclusion: We suggest that this sleeve resection, which is technically demanding, should be considered in patients with centrally located lung cancer, because ttlis lung-saving operation is safer than pneumonectomy and is equally curative.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.3
• /
• pp.191-197
• /
• 2008

Background: Due to the irreversible nature of chronic obstructive pulmonary disease (COPD), the treatment aim in patients with COPD is not to cure but to reduce the symptoms, increase lung function, and improve the quality of life. It has been suggested that depression is a common emotional disturbance in patients with COPD who are faced with a major physical impairment and embarrassing symptoms. This study evaluated the prevalence and risk factors of depression in patients with chronic obstructive pulmonary disease. Methods: A total of 59 patients with a registered diagnosis of chronic obstructive pulmonary disease were selected. Depression was assessed using the Centers for Epidemiologic Studies Depression (CES-D) scale. The quality of life was assessed using the Korean version of the St. George's Respiratory Questionnaire. Results: The prevalence of depression was 17.0%. In the correlation model, the interaction of the $FEV_1%$ over predicted value and SGRQ score(symptom, activity, impact, overall score) was statistically significant. The interaction of the $FEV_1%$ over predicted value and depression scale(CES-D) was also statistically significant. There was a positive correlation between the SGRQ scores(symptom, activity, impact, overall score) and the depression scale. Conclusion: The prevalence of depression in patients with chronic obstructive pulmonary disease is relatively high. The pulmonary function and the living standards were found to be significant risk factors for depression.