• Title/Summary/Keyword: 평판 조명

Search Result 74, Processing Time 0.025 seconds

Electrical Characteristics and Mathematical Model of Amorphous Silicon Thin Film Transistor for Flat Panel Display (평판 표시기용 비정질 실리콘 박막 트랜지스터의 전기적인 특성과 수학적인 모델)

  • 최창주;이우선;김병인
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.8 no.5
    • /
    • pp.49-55
    • /
    • 1994
  • 평판 디스플레이용 비정질 실리콘 박막 트랜지스터의 전기적인 특성과 수학적인 모델에 대하여 연구되었고 이론적인 모델은 실험을 통하여 그 타당성을 입증하였다. 게이트전압이 고정된 상태에서 드레인 전압 증가에 따른 드레인 포화전류는 증가되었고 디바이스의 포화는 드레인 전압이 증가될수록 더 증가되었으며 문턱전압은 감소되었다. 세 개의 변수로 구성된 디바이스의 전달특성과 출력특성에 대한 실험 결과값에 대한 모델식이 제시되었는데 이 모델은 디비이스의 기하학적인 구조를 간단화 하기위한 모델식이다.

  • PDF

The Propagation Characteristics of Electromagnetic Waves in accordance with electrode shapes at VHF Band Using an Antenna (안테나를 이용한 VHF대역에서 전극형태에 따른 방사전자파의 전파특성)

  • 김충년;지승욱;이상훈;이광식
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.16 no.4
    • /
    • pp.73-79
    • /
    • 2002
  • In this paper, electromagnetic waves radiated from discharge at three-type electrodes(needle-plane, plane-plane and sphere-plane electrode) using AC power source in air are measured and the peculiar patterns of their spectra are reported. The radiated electromagnetic waves were measured in bandwidth of VHF(30-230[MHz]) using a biconical antenna and a spectrum analyzer. When the discharge onset voltage range, high electric field intensity is shown in frequency band of 45, 70, 80[MHz] in case of needle-plane electrode configuration and 40[MHz] in case of plane-plane and sphere-plane electrodes configuration. However, when the breakdown voltage range, the frequency spectrum distribution of radiated electromagnetic waves appear different in the whole frequency range according to the shapes of electrode.

Improving the characteristics of Xe dielectric barrier discharge lamp. (제논 유전체 장벽 방전형 램프의 성능 개선에 관한 연구)

  • Park, Ji-Su;Song, Myong-Hun;Jang, Sang-Jin
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.147-150
    • /
    • 2007
  • 본 논문은 일반조명용과 LCD Backlight에 적용 가능한 제논 유전체 장벽형 평판형광램프에 대한 연구이다. 일반적으로, 수은을 포함한 형광램프는 낮은 온도에서의 휘도문제와 상대적으로 긴 점등시간, 수명, 그리고 환경 문제가 있다. 이러한 문제점들을 해결하기 위해서 제논 유전체 장벽형 평판형광램프가 연구되었다. 100(W)급($384{\times}321{\times}10mm$)으로 제작된 램프는 AC 펄스 전압에 의해 균일도, 안정한 방전, 우수한 전기적 및 광학적 특성을 가진다. 더 높아진 효율은 빠른 상승시간을 가진 AC 펄스전압, 주파수와 듀티의 구동 최적화, 전극의 형상, 압력 최적화 등에서 얻어진다. 이 연구에서 제논 유전체 장벽형 평판형광램프는 90(%)의 균일 도에서 7,600(cd/$m^2$)의 휘도와 32[1m/W] 이상의 효율을 얻었다.

  • PDF

평판디스플레이 노광장비용 초박형 마스크스테이지 개발

  • 배상신;정연욱;송준엽
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.206-206
    • /
    • 2004
  • 평판디스플레이의 사이즈 및 그 응용범위가 확대되어 감에 따라, 기존의 근접식 노광장비로는 원하는 성능의 디스플레이소자를 생산하는데 한계에 도달하게 되었다. 최근에는 반도체웨이퍼 생산에 적용되는 투영식분할노광방식 또는 스캔방식의 노광장비가 평판디스플레이소자의 생산에 적용되는 추새인데, 이러한 방식의 노광장비의 핵심기능을 수행하는 모듈 증 마스크스테이지가 있다. 투영식노광 장비의 노광광원(조명광학계)에서 발생된 노광광은 마스크를 통과함으로써 특정패턴을 형성할 수 있는 형태로 변화되고, 투영광학계를 거쳐 피노광재에 조사 된다.(중략)

  • PDF

A design of Fly-Back electronic ballast for Xeon Dielectric Barrier Discharge Flat Fluorescent Lamp. (제논 유전체 장벽 방전형 평판형광림프용 Fly-Back방식 전자석 안정기 설계)

  • Cho, Ho-Yon;Lee, Hyun-Heang
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.111-113
    • /
    • 2007
  • 본 논문에서는 제논 유전체 장벽 방전형 평판형광램프용 Fly-Back방식 전자식 안정기를 설계하였다. 본 전자식 안정기는 Fly-Back방식의 능동형 역률 보상 회로와 인버터회로를 사용하여 기존의 Sine wave의 형태가 아닌 펄스파 형태의 출력을 만드는 고역률, 고신뢰성 전자식 안정기를 제작하였다. 제논 평판형광램프의 점등전압은 고압이 사용되므로 램프 파손의 경우와 무부하의 경우로부터 사고를 방지하기 위해 보호회로를 사용하여 이상전압, 이상전류에 의한 사고를 차단했다.

  • PDF

Study on including improvements to, LED flat light pattern (광 패턴를 향상시킨 LED 평판 등에 관한 연구)

  • Jung, Byoung-Jo;Jang, Sung-Whan;Kwon, Hyuk-Dae;Roh, Yong-Gi
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.12b
    • /
    • pp.543-546
    • /
    • 2011
  • 기존의 형광등 또는 LED 평판등은 방사 형태를 제어하지 못한다는 단점이 있다. 본 연구에서는 이런 단점을 보안하기 위한 LED 모듈에 2차 렌즈를 부착하여 전 방향으로 방사 형태를 조절방법에 대해 시뮬레이션 분석을 하였다. 방사 각을 약 $100^{\circ}$로 시뮬레이션 하였으며, 기존의 조명기구들보다 설치간격을 넓게 하여도 광 균일가는 기존 조명기구들보다 더욱 향상됨을 알 수 있었다. 차후 LED 평판 등을 실제 제작하여 측정 및 분석할 예정이다.

  • PDF

Flat Fluorescent Lamp for LCD Backlighting (LCD 후면 광원용 평판형광램프)

  • Kwon, Soon-Seok
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.2
    • /
    • pp.15-19
    • /
    • 2007
  • A 15[inch] diagonal mercury-free flat discharge lamp with insulated electrode has been developed as backlight for a LCD backlighting. When the drive voltage pulse conditions were set properly, a uniform and stable discharge extends over the entire volume. It was obtained luminance of $10,330[cd/m^2]$ without prism sheet in uniform and stable discharge.

Technique of Transformer Diagnosis Using Ultrasonic Sensor (초음파 센서를 이용한 변압기 예방진단 기술 연구)

  • 권동진;최수안;박형준;곽희로;정찬수;전희종;김재철
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.8 no.2
    • /
    • pp.46-53
    • /
    • 1994
  • This paper presents a diagnosis teclmique using ultrasonic sensors for monitoring the growth of partial discharge in power transformers. This teclmique counts the ultrasonic pulses generated from partial discharge over a threshold leveL In experiments, a ultrasonic generator and the point to plane electrodes generated ultrasonic pulses. With a constant voltage between the electrodes, the ultrasonic pulses over a threshold were a fairly constant. When the voltage increased or insulation paper was inserted between the electrodes, the partial discharge increased. In this case the number of ultrasonic pulses also increased and therefore the proposed teclmiques successfully diagnosed the growth of partial discharge.

  • PDF

Fabrication and Characteristics of Flat Fluorescent Lamp (평판형광램프의 제작 및 특성)

  • 권순석;임민수;임기조
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.16 no.1
    • /
    • pp.8-12
    • /
    • 2002
  • In this paper, we studied a flat fluorescent lamp with high luminance for LCD backlighting. The lamps have simple structures with ITO glass, insulator layer, phosphor layer, electrode layer and gas gap. The firing voltage was decreased with increasing the frequency. It was considered that this tendency was resulted from the space charge effect due to Xe and Ar positive ions trapped in gas gap. Decrease of uniform voltage at higher drive frequency is due to the remaining space charges which are produced by preceding period. As a result, luminance of 2700[cd/m$^2$] and maximum luminous efficiency of 51[m/W] were obtained with luminance uniformity of 96[%] in operation(700[V$\_$rms/], 80[kHz].