• Journal of the Korean association of regional geographers
• /
• v.21 no.4
• /
• pp.660-672
• /
• 2015

The rural housing is a key element of the rural landscape. The studies on the rural housing have focused on folk housing, but this study focuses on the comtemporary rural housing. The research area is the eight rural settlements on the sea islands of Gyeongnam. This study may provide the base for an understanding Korean rural landscape through the analysis of the rural housing types with special reference to the roofing types and materials. Most roofing types but the flat roofing type belong to the traditional roofing types. Among the combined-style roofing(결합양식지붕) types, the pitched-and-flat roofing(경사-평지붕) type is about ten times more frequent than the pitched-and-pitched roofing(경사-경사지붕) type. The most frequent roofing materials are cement, precoated steel plate(컬러강판), and artificial slate(인조슬레이트). Five typical types of rural housing are derived from the remarkable combinations of roofing types and roofing materials in the research area.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.107-116
• /
• 2013

This study was undertaken to investigate the characteristics of retention and evapotranspiration in the extensive greening module of sloped and flat rooftops for stormwater management and urban heat island mitigation. A series of 100mm depth's weighing lysimeters planted with Sedum kamtschaticum. were constructed on a 50% slope facing four orientations(north, east, south and west) and a flat rooftop. Thereafter the retention and evapotranspiration from the greening module and the surface temperature of nongreening and greening rooftop were recorded beginning in September 2012 for a period of 1 year. The characteristics of retention and evapotranspiration in the greening module were as follows. The water storage of the sloped and flat greening modules increased to 8.7~28.4mm and 10.6~31.8mm after rainfall except in the winter season, in which it decreased to 3.3mm and 3.9mm in the longer dry period. The maximum stormwater retention of the sloped and flat greening modules was 22.2mm and 23.1mm except in the winter season. Fitted stormwater retention function was [Stormwater Retention Ratio(%)=-18.42 ln(Precipitation)+107.9, $R^2$=0.80] for sloped greening modules, and that was [Stormwater Retention Ratio(%)=-22.64 ln(X)+130.8, $R^2$=0.81] for flat greening modules. The daily evapotranspiration(mm/day) from the greening modules after rainfall decreased rapidly with a power function type in summer, and with a log function type in spring and autumn. The daily evapotranspiration(mm/day) from the greening modules after rainfall was greater in summer > spring > autumn > winter by season. This may be due to the differences in water storage, solar radiation and air temperature. The daily evapotranspiration from the greening modules decreased rapidly from 2~7mm/day to less than 1mm/day for 3~5 days after rainfall, and that decreased slowly after 3~5 days. This indicates that Sedum kamtschaticum used water rapidly when it was available and conserved water when it was not. The albedo of the concrete rooftop and greening rooftop was 0.151 and 0.137 in summer, and 0.165 and 0.165 in winter respectively. The albedo of the concrete rooftop and greening rooftop was similar. The effect of the daily mean and highest surface temperature decrease by greening during the summer season showed $1.6{\sim}13.8^{\circ}C$(mean $9.7^{\circ}C$) and $6.2{\sim}17.6^{\circ}C$(mean $11.2^{\circ}C$). The difference of the daily mean and highest surface temperature between the greening rooftop and concrete rooftop during the winter season were small, measuring $-2.4{\sim}1.3^{\circ}C$(mean $-0.4^{\circ}C$) and $-4.2{\sim}2.6^{\circ}C$(mean $0.0^{\circ}C$). The difference in the highest daily surface temperature between the greening rooftop and concrete rooftop during the summer season increased with an evapotranspiration rate increase by a linear function type. The fitted function of the highest daily surface temperature decrease was [Temperature Decrease($^{\circ}C$)=$1.4361{\times}$(Evapotranspiration rate(mm/day))+8.83, $R^2$=0.59]. The decrease of the surface temperature by greening in the longer dry period was due to sun protection by the sedum canopy. The results of this study indicate that the extensive rooftop greening will assist in managing stormwater runoff and urban heat island through retention and evapotranspiration. Sedum kamtschaticum would be the ideal plant for a non-irrigated extensive green roof. The shading effects of Sedum kamtschaticum would be important as well as the evapotranspiration effects of that for the long-term mitigation effects of an urban heat island.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.39-42
• /
• 2008

본 연구에서는 한반도에 상륙하는 태풍에 의해 강풍이 발생하여 지상의 주택에 미칠 피해를 산정하기 위한 기초 단계로 한반도 주택의 가장 보편적인 유형을 선정하고자 하였다. 1층 단독주택의 대표적인 지붕 유형은 평지붕과 모임지붕이며 천정고는 2.3m, 층고는 2.6m, 평균 면적 85$m^2$에 대한 대표적인 수치를 구하면 폭과 길이는 11,300mm 와 7,530 mm 라 할 수 있다.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.369-382
• /
• 2016

The studies on the rural housing have focused on folk housing, but this study focuses on the contemporary rural housing with special reference to the roof types/materials and the outer wall materials. The research area of this study is the fourteen rural settlements in Jeju Island. The hip roof type, the hip/flat roof type, the simple-flat roof type, the gable roof type, and the eyebrow-and-flat roof type are the most frequent roof types. Among the roof materials, the precoated steel plate, the artificial slate, the cement, the cement/roof tile, and the cement/artificial slate are the most frequent materials. The cement holds more than a half of the outer wall materials, and the cement/basalt rock, the tile/cement, the tile, and the diverse siding are the next frequent outer wall materials. The comparison of the rural housing reveals that there are some clear differences between Jeju Island and Gyeongnam Province in terms of the roof types and the outer wall materials.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.83-88
• /
• 2012

This study analyzed the measured value came out by the field test to verify the surface temperature reduction of the flat roof due to green roof, and confirmed the influence of the green roof based on it, and assessed the possibility of saving structures' energy and reducing $CO_2$ emission of structures. For the actual measurement, the differences of the average atmospheric temperature of the green roof and non-green roof flat roof were $8.67^{\circ}C$ and $0.787^{\circ}C$, and the average floor temperature gaps were $11^{\circ}C$ and $2.008^{\circ}C$ in October and November respectively. It was expected that if it's measured on around summer solstice that the temperature gets higher, the deviation of the surface temperature should be bigger, and it was confirmed that the green roof eventually raises insulating effect of structures and will influence on cooling and heating effects such as energy saving and insulating.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.48-56
• /
• 2010

Since ancient times, Korea has been called a land of beauty. Scenic sites under the Cultural Properties Protection Act include picturesque places that are famous for their natural scenic beauty as well as their historical and cultural value. Scenic sites are managed as natural assets to promote their preservation and use. However, the management of scenic sites can produce adverse effects on regional development and ownership rights. Moreover, the purpose of their designation as cultural assets is not fully understood because scenic sites are managed by focusing on restraint on users' act the same as was applied to historic sites. Therefore, the purpose of this study is to protect inhabitants' rights of ownership by arranging the boundaries of designated areas and by providing standard permission for condition changes in the Buryeongsa Valley, which was designated as a Scenic Site in 1979. The results of this study can be summarized as follows: First, arranging the boundaries of the designated area includes the arrangement of the edge lines standardized on the visual range of the mountain ridge, preventing the loss of landscape beauty in the designated district; the internal clearing district focuses on the existing settlement. Gearing the designated areas after the arrangement of the boundaries results in $11,928,932m^2$, 38.6% compared to the existing designated areas. Second, it establishes a 500m buffer zone inside the radius of the boundary of the cultural asset as a standard for condition changes that seriously affect landscape preservation. Third, the standards for permission on building 'height regulations' are divided into flat and gable, according to the roof shape. The adopted standard is 8m high for 2 story flat roofs, and 12m high for 2 story gable roofs.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.83-91
• /
• 2013

Cool roofs are currently being emerged as one of important mechanism to save energy in relation to the building. It is specifically proposed that the changing trends of rooftop surface temperature in the flat roof building model could be used effectively as an indicator to reduced cooling load reduced by cool roof since it can present stable temperature record, that is not influenced according to the nearby physical as well as human variables. The temperature of cool roof in summer was lower around $20^{\circ}C$, compared to the general roofs. Such a seasonal or daily comparative study for rooftop temperature in the building model will highlight that the cool roof efficiency could be calculated in much area-wide context according to rooftop color distribution in urban residential area. It is anticipated that this research output could be used as a valuable reference in identifying energy saving by cool roof since an objective monitoring has been proposed based on the rooftop temperature in the building model, fully quantitative performance of thermal infrared image.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6504-6513
• /
• 2013

The result can be summarized as follows. First, the following periodically changing characteristics were examined:roof form(gambrel/hipped-flat-gable), structure of roof and wall(wood-framed-cement masonry-RC-Light iron framed), roof material(thatched-tiled-slate-cement/steel sheet-asphalt/sandwich panel/mortar water-proofing), wall material(clay plaster/lime plastered-dressing tile/bricks-painting on the cement plastering-native stone dressing/siding/tile), fence material(masonry of stone and cement bricks), and courtyard materials(clay and concrete). Secondly, the regionally changing characteristics of those elements, rural housing structure, roof form, roof structure material, wall finishing material, fence and courtyard material in the outer space, differed according to the location of rural housing, i.e.north, middle, south region. The changing characteristics of both the roof structure and wall structure are similar to those of the three regions.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.57-65
• /
• 2016

Domestic photovoltaic system for roof-top is installed towards the south at an angle of 20 to 35 degrees and the shape of PV array is divided into two kinds; a plane shape and a curved shape. This paper aims to understand an actual condition of PV facility and strengths and weaknesses of support structure production and installation and to consider the best PV surface shape by analyzing theoretical logics of these two surface shapes and architectural perspective-based realistic case studies. This study targeted 98 facilities including common houses, public institutions and education institutions. In common houses, all of 59 PV facilities have a plane surface. In public institutions, 7 of 15 PV facilities have a curved array surface and 8 PV facilities have a plane surface. In education institutions, also, 14 of 24 PV facilities have a plane array surface and 10 PV facilities have a curved surface. Most of 98 facilities have a flat roof supporting shape. However, it was found that the curved shape wasn't positive for PV generation due to the change of radial density and it was at least 10 % more expensive to produce its structure. Also, domestic general large single-plate PV facilities have problems of harmony with buildings and wind load. Therefore, it is considered that for fixed-type roof-top PV, a plane PV array shape is good for optimum generation and economic efficiency and a parallel array structure on the roof surface is favorable to wind load and snow load without being a hindrance to the building facade.

• Journal of the Korean housing association
• /
• v.12 no.2
• /
• pp.191-198
• /
• 2001

The aim of this research was to examine the thermal performance of the flat roof in proportion to various directional changes, the results of which were drawn from the miniature model experiment. In this process, various thermal environmental factors were measured and compared with one another to research their aspects of changes. The brief results of this research are as follows: 1) The indoor temperature and load per hour in proportion to directional changes shows the same degree of changes. As for the results of the clear-sky and cloudy-sky experiments, both of them generally appear advantageous in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, despite slight differences in the indoor temperature and load per hour in proportion to directional changes. 2) As for the total load of degree day per direction of the clear-sky and cloudy-sky experiments, both of them shows their advantageous results in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, despite minor differences in their loads. 3) As for the peak load of degree hour, while the clear-sky experiment shows its advantage in the order of $S-30^{\cire}C$-E, S, $-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, the cloudy-sky experiment does so in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, E, $S-60^{\cire}C$-W, $S-60^{\cire}C$-E.