• Title/Summary/Keyword: 평면파 해석

Search Result 127, Processing Time 0.035 seconds

Three-dimensional analysis of the mufflers by BEM (경계요소법에 의한 소음기의 3차원 해석)

  • 윤제원;임정빈;권영필
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.19-24
    • /
    • 1995
  • 단순한 형상의 소음기는 평면파이론에 의해 비교적 간단하게 음향성능을 해석적으로 구할 수 있다. 그러나 소음기의 형상이 복잡해지거나 해석하고자 하는 주파수의 범위가 평면파의 차단주파수 이상이 될 경우 소음기 내부의 음장이 평면파에서 벗어나게 되어 평면파 이론에 의한 해석은 실제와 상당한 오차가 발생하게 되므로 음장에 대한 3차원 해석이 필요하다. 이론적으로 3차원 문제를 해석할 수 있는 경우는 형상이 극히 단순한 경우에 국한되므로 유한요소법(FEM), 경계요소법(BEM)과 같은 수치해석적인 방법이 이용되고 있다. 경계요소법은 적분 커넬(kernel)의 특이성(singularity) 문제가 있지만 대상 영역의 경계면만을 이산화함으로써 모델링에 소요되는 시간과 노력을 절약할 수 있으므로 음향문제 해석에 있어서 효율적인 방법이라고 할 수 있다. 본 연구의 목적은 3차원 경계요소법 프로그램을 개발하고 평면파이론에 의한 해석이 어려운 여러가지 형태의 소음기에 대한 음향성능을 예측하고 실험으로 검증하는것이다. 특히, 단일영역으로 해석이 불가능한 다공형 소음기에 영역분할법을 적용하여 계산하고 결과를 검토하였다.

  • PDF

Analysis of Ultrasound Synthetic Transmit Focusing Using Plane Waves (평면파를 이용한 초음파 합성 송신 집속 기법의 해석)

  • Lee, Jong Pil;Song, Jae Hee;Song, Tai-Kyong
    • The Journal of the Acoustical Society of Korea
    • /
    • v.33 no.3
    • /
    • pp.200-209
    • /
    • 2014
  • In this paper, we present a general model for synthetic transmit focusing method using plane waves (STF-PW) of which the properties are investigated through mathematical analysis and compared with those of the conventional focusing method. The analysis results show that STF-PW produces non-diffracting beams in the sense that their main lobe widths do not change with depth. We also present a method for synthesis of plane waves to obtain a desired main lobe width while preventing grating lobe generation and a method for broadening the region over which the non-diffracting property is maintained. The proposed model and analysis results were validated through computer simulations.

Solution Comparisons of Modified Mild Slope Equation and EFEM Plane-wave Approximation (수정 완경사파랑식과 EFEM 평면파 근사식의 해 비교)

  • Seo, Seung-Nam
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.21 no.2
    • /
    • pp.117-126
    • /
    • 2009
  • In order to test the accuracy between the modified mild slope equation (MMSE) without evanescent modes and the plane-wave approximation (PA) of eigenfunction expansion method, various numerical results from both models are presented. In this study, analytical solutions of two models are employed, one based on the MMSE derived by Porter (2003) and the other on the scatterer method of PA by Seo (2008a). Judging from direct comparisons against existing results of rapidly varying topography, the PA model gives better predictions of the wave propagation than the MMSE model.

A Study of Power Absorption in Human Head Exposed to Plane Wave (평면파에 노출된 인체 두부의 전력흡수 해석)

  • 이애경;조광윤;이혁재
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.6
    • /
    • pp.665-680
    • /
    • 1997
  • The specific absorption rate (SAR) distributions in various models of the human head have been analyzed when the models are exposed to 350 MHz and 900 MHz plane waves. The numerical analysis is performed with the finite-difference time-domain (FDTD) method. A homogeneous sphere including a cylinderical neck, a homogeneous head shaped model, and a heterogeneous realistic model are used as models of human head. The incident plane wave used for these calculations is propagating from the front to the back or from the back to the front of the head model, with its E-field vector orientation being parallel to the major length of the body. The specific findings are: 1) the average SARs of the three models are similar mutually but the local SARs of them differ greatly mutually; 2) the power is deposed more deeply in the head at 350 MHz, which is roughly the resonant frequency of a human head, than at 900 MHz; 3) for a plane wave propagating from the back, "hot spot" is found in the neck region, not in the head; 4) for a plane wave propagating from the front, "hot spot" is found in the nose at 900 MHz, and in the upper part of the lip and the jaw region at 350 MHz.

  • PDF

Applicability Study of Component Wave Analysis for Irregular Waves (불규칙파에 대한 성분파 계산법의 현지 적용성 검토)

  • 곽문수;채지덕;편종근;백승화
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 2000.09a
    • /
    • pp.155-160
    • /
    • 2000
  • 해안 및 항만 구조물의 단면설계 및 평면 배치 계획에 있어서 가장 중요한 것은 설계파를 정확히 산정하고 항내 파랑장을 정도 높게 해석하는 것이다. 지금까지의 파랑장 해석은 주로 단일주파수와 방향에 대한 규칙파 해석으로 이루어졌으며 이것에 의한 계산결과는 수많은 주파수와 방향, 파고들이 합성되어 이루어진 실제 해역의 불규칙 파랑장을 잘 재현한다고는 말할 수 없다. 구조물 주위에서의 불규칙 파랑 해석은 주로 구조물에 의한 회절 계산에서부터 시작되었다.(중략)

  • PDF

항내 정온계산 위한 BOUSS-2D 모형의 반사특성 검토

  • Ha, Chang-Sik;Kim, Tak-Gyeom;Kim, Jong-Hun;Yu, Ha-Sang
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.05a
    • /
    • pp.65-66
    • /
    • 2018
  • 국내 항만의 건설 및 확장 보수를 위한 설계 단계에서의 평면배치 검토시 항내측으로 내습하는 파랑변형특성에 대한 정밀한 평가는 필수적이다. 이에 따라 많은 수학적 모델들이 연안역과 항만에서의 파랑전파와 변형에 대해 개발되어 왔다. 특히 항내정온도의 해석은 항만 사용성 측면에서 매우 중요하며 실제 해상의 파랑상태와 유사한 불규칙파로의 해석이 요구되어 지고 있다. 항내정온도 해석에 있어서 항내파랑장 형성에 크게 영향을 미치는 구조물의 반사율을 효과적으로 적용하는 것은 매우 중요하다. 하지만, 구조물의 반사율은 이론계산이 어렵고, 일반적으로는 모형실험 혹은 현지관측에 의해 추정된다. 따라서, 일반적인 경우 비용 및 시간상의 제약으로 인해 평면 파랑모형으로 정온도 해석시 반사율의 적용은 구조형식별로 연구자들에 의해 개략 제시된 반사율을 적용하고 있다. 특히, 다방향 불규칙파의 적용시에 경계조건으로는 다방향 불규칙파를 효과적으로 제어할 수 있는 부분반사 경계면과 계산영역 밖으로 나가는 파랑에 대해서 인공적인 흡수층 또는 감쇠층(artificial damping layer)을 설정하여 반사를 제어하는 기법을 많이 적용하고 있다. 이때 항만구조물의 부분반사는 파랑제원에 따른 damping layer의 parameter의 조정에 의해 구조물의 구조형식별 반사율을 적절히 재현할 필요성이 있다. 본 연구에서는 불규칙파를 대상으로 damping layer의 parameter(무차원 감쇠계수, 감쇠층의 두께)등의 변화에 따른 반사율의 변화특성을 고찰하고, 향후 부분반사 경계면으로 damping layer가 적용되는 평면 파랑모형의 정온도 해석시 부분반사의 적용에 대한 기초자료를 제공하고자 한다.

  • PDF

Performance analysis of the axisymmetric mufflers by BEM (BEM을 이용한 축대칭 소음기의 성능해석)

  • 임정빈;정갑철;권영필
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1994.10a
    • /
    • pp.306-311
    • /
    • 1994
  • 본 연구에서는 축대칭 형태의 음향문제를 해석할 수 있는 경계요소 프로그램을 개발하여 소음기의 투과손실(transmission loss)의 계산에 적용하였다. 우선 단순팽창관 소음기에 대해서는 경계요소법에 의해 투과손실을 구한 후 평면파이론 및 실험으로 구한 값과 비교 평가하였다. 또한, 평면파이론을 적용할 수 없는 경우로서 흡음재를 부착한 팽창관 소음기에 대해서는 경계요소법으로 구한 투과손실을 실험결과와 비교 고찰하였다.

  • PDF

Analytic solution of TE plane-wave scattering from rectangular grooves (네모난 금속홈에 의한 TM 평면파 산란의 해석적 해)

  • Cho, Yong-H.
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2005.11a
    • /
    • pp.175-178
    • /
    • 2005
  • TM plane-wave scattering from finite rectangular grooves in a conducting plane is systematically analyzed with the overlapping T-block method. Multiple rectangular grooves are divided into several overlapping T-blocks to obtain the fast CPU time, CAD applicability, and wide versatility. The scattered fields are obtained in simple closed forms including a fast-convergent integral.

  • PDF

An Analysis of Load Current for Cascaded Transmission Line Excited by External Plane Wave (외부 평면파에 의해 유기되는 연쇄 접속 전송선로의 부하전류 해석)

  • 박영태;이상설
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.15 no.3
    • /
    • pp.232-242
    • /
    • 1990
  • This paper presents the formulas for load currents of a cascaded transmission line excited by external plane wave using Smith's method for EMI currents of a single transmission line. Calculating under the condition that the lines having same characteristic impedence are cascaded, numerical results of this study are well agreed with those of Smith and show the fact that as the width and length of the line reduced to 1/10 respectively, the load-EMI currents decreased by about 40dB.

  • PDF

타원형 완경사 모형에서의 고차원 무반사 경계조건에 관한 연구

  • ;M. B. Abbott;M. W. Dingemans
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1992.08a
    • /
    • pp.72-76
    • /
    • 1992
  • 평면파 수치모형 해석시 가상경계에 평행한 입사각을 갖거나, 다방향의 입사파가 가상경계로 동시에 입사되는 경우에는 무처리 시 수치 반사가 발생되므로 해에 악영향을 미친다. 따라서 이러한 경우에 대해 가상경계에서 파랑 Energy 투명하게 통과시키는 고차원 무반사 경계조건에 대해 연구하였다. 이들 조건식의 수학적 안정성을 분석하기 위해 phperbolic system에서 normal-mode 분석을 수행하였다. 1차 및 2차의 고차원 무반사 경계조건을 Galerkin 가중잔차법을 이용 유한요소 모형에 적용하였으며 이들에 대한 특성을 시험하기 위해 수치실험을 실시하였다.

  • PDF