• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.703-708
• /
• 2022

A detector module measuring the depth of interaction(DOI) was designed to improve the spatial resolution of positron emission tomography(PET). The scintillation pixel array consists of two layers, and a light guide is inserted between the layers to make the light generated through the gamma-ray event different for each layer. There are four light guides, and one light guide is designed to be coupled to a 2 × 2 array of scintillation pixels. The light generated from the top layer is moved to the photosensor with a wider distribution through the light guide, and the light generated from the bottom layer is incident on the photosensor with a narrower distribution than the top layer. When a flood image is reconstructed based on the signals obtained from the photosensor by different distributions, scintillation pixels are imaged at different positions for each layer. To verify this, a DETECT2000 simulation tool that simulates the behavior of light in a scintillator was used. By designing a scintillation pixel array, a detector consisting of a light guide and a photosensor, a gamma ray event was generated in all scintillation pixels to obtain a flood imgae. As a result, it was confirmed that the top and bottom layers were imaged at different positions and completely separated. When this detector is applied to PET, it is considered that image quality can be improved through imporved spatial resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.688-695
• /
• 2000

We present a multi-view autostereoscopic display system based on volume holographic storage technique. In this proposed system, the interference pattern of spatial multiplexed plane reference and angular multiplexed plane object beams are recorded into a photorefractive crystal, which plays a role of guiding object beams of multi-view images into the desired persfective directions. For reconstruction, object beams containing the desired multi-view image information, which satisfy Bragg matching condition, are illuminated in the time-division multiplexed manner onto the crystal. Then multiple stereoscopic images are Projected to the display plane for autostereoscopic 3D viewing.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

In order to acquire an image in a positron emission tomography, it is necessary to draw the position coordinates of the scintillation pixels of the detector module measured at the same time. To this end, in a detector module using a plurality of scintillation pixels and a small number of photosensors, it is necessary to obtain a flood image and divide a region of each scintillation pixel to obtain a position of a scintillation pixel interacting with a gamma ray. Alternatively, when the number of scintillation pixels and the number of photosensors to be used are the same, the position coordinates for the position of the scintillation pixels can be directly acquired as digital signal coordinates. A method of using a plurality of scintillation pixels and a small number of photosensors requires a process of obtaining digital signal coordinates requires a plurality of photosensors and a signal processing system. This complicates the signal processing process and raises the cost. To solve this problem, in this study, we developed a method of obtaining digital signal coordinates without performing the process of separating the planar image and region using a plurality of flash pixels and a small number of optical sensors. This is a method of obtaining the position coordinate values of the flash pixels interacting with the gamma ray as a digital signal through a look-up table created through the signals acquired from each flash pixel using the maximum likelihood function. Simulation was performed using DETECT2000, and verification was performed on the proposed method. As a result, accurate digital signal coordinates could be obtained from all the flash pixels, and if this is applied to the existing system, it is considered that faster image acquisition is possible by simplifying the signal processing process.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.190-195
• /
• 2007

A novel optical coupling filter with finite-thickness metal-strip gratings printed on optical planar dielectric slabs is proposed, and Bragg conditions of the device are rigorously evaluated by using Modal Transmission-Line Theory (MTLT). The numerical results reveal that the guiding structures have filtering properties due to a leaky-wave stop-band while conventional DFB guiding structures consisted of dielectric gratings depend on a feedback-wave stop-band. Consequently, it shows that the optical coupling titter dependent on the leaky-wave filtering characteristics can be compounded of such optical devices as LD and optical fiber.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.214-215
• /
• 2003

평면광도파로 브래그격자는 광도파로 내부의 코어의 굴절률을 주기적으로 또는 비주기적으로 변화시켜 특정 파장의 빛을 반사시키거나 투과손실로 작용하게하는 광소자이다. 이러한 광소자는 광가감다중화기, 분산보상기, 파장선택형 반사거울, 파장제거필터, 증폭기의 이득평탄화, 광스위치등 여러분야의 소자 개발의 핵심적인 기능을 부여한다. UV 엑시머레이저의 출력을 게르마늄이 첨가된 실리카 유리에 조사하여 격자구조를 형성시키는 방법이 Hill 등에 의해 발표되었고 이후, 홀로그래피 방법, 위상마스크 방법등 여러 가지의 광섬유 격자 형성방법을 활용하여 여러종류의 광통신소자들이 연구되었다. (중략)

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.449-456
• /
• 2005

Optical burst switching (OBS) overcomes the inefficient resource usage of optical circuit switching and minimizes the optical buffering requirement of optical packet switching. General switch management protocol (GSMP) is an open interface between a label switch and a controller, and it provides connection, configuration, performance, event management and synchronization. GSMP open interface in the OBS network allows the implementation of OBS switch to be simple by separating the data forward plane from the control plane. We defined managed objects to support connection, configuration, performance, and fault management for the management of OBS network in the GSMP open interface. We proposed the network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verified the possibility of connection management using distributed network management model in the GSMP open interface of OBS network by implementing GSMP and network management functions with managed objects of OBS.

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.239-245
• /
• 1997

The sorption kinetic was studied to evaluate feasibility of removing PCBs from mineral oil with activated carbon. Adsorption efficiency for Aroclor 1242 which is composed of lower chlorinated PCB formulations was $\geq$ 95%, whereas the adsorption efficiency for Aroclor 1260 having higher chlorinated constituents was considerably lower with the efficiency falling to 75%. The observed difference in the adsorption efficiency is attributed to the geometry of PCBs with non-planar and coplanar structure. The concentration of coplanar PCBs is appreciably higher in Aroclor 1242. Since toxicity is primarily associated with coplanar congeners, the preferential adsorption of coplanar congeners by activated carbon accounts for the fact that toxicity reduction can be achieved through this process. The efficiency of process was assessed in terms of Toxicity Equivalence Factor (TEF).

• The Safety technology
• /
• no.148
• /
• pp.15-17
• /
• 2010

충북 진천군 초평면 용정리에 위치하고 있는 넥상스코리아는 2001년 대성전선과 전력케이블 전문 기업인 넥상스그룹이 합병하면서 설립된 외국인 투자기업이다. 주요생산품으로는 전력케이블, 동통신케이블, 광통신케이블 및 자동차전선을 생산하고 있으며, 안전을 최우선으로 근로자의 건강은 물론 친환경제품생산으로 글로벌 기업으로 도약해 나가고 있다.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.493-498
• /
• 1999

With increasing demand for fast and reliable, yet economical data storage devices, the role of optical disk technology is becoming more important. In recent years, advanced laser technology combined with new materials has given the competitive edge over the traditional magnetic memory devices both in memory capacity and reliability of data retrieval. Continuing effort is being put into developing smaller and more complex structures for optical disks to increase their memory density. Characterization of such multilayered structure requires not only high spatial resolution for observation but also laborious specimen preparation. In this paper, the method of preparing optical disk specimens for TEM characterization is described in detail. The microstructural features in optical disks observed by TEM are also discussed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.317-318
• /
• 2019

가상/증강현실로 대표되는 공간정보 기반 실감형 콘텐츠에 대한 관심이 증대되면서 객체인식 등의 지능형 공간인지 기술에 대한 연구가 활발히 진행되고 있다. 특히 HMD등의 영상 시각화 장치의 발달 및 5G 통신기술의 출현으로 인해 실시간 대용량 영상정보의 송, 수신 및 가시화 처리 기술의 기반이 구축됨에 따라, $360^{\circ}$ 스트리밍 영상정보 처리와 같은 고자유도 콘텐츠를 위한 관련 연구의 필요성이 증대되고 있다. 하지만 지능형 영상정보 처리의 대표적 연구인 딥 러닝(Deep Learning) 기반 객체 인식 기술의 경우 대부분 일반적인 평면 영상(Planar Image)에 대한 처리를 다루고 있고, 파노라마 영상(Panorama Image) 특히, $360^{\circ}$ 스트리밍 영상 처리를 위한 연구는 미비한 상황이다. 본 논문에서는 딥 러닝을 이용하여 $360^{\circ}$ 스트리밍 영상에서의 객체인식 연구 방법에 대해 서술한다. 이를 위해 $360^{\circ}$ 카메라 영상에서 딥 러닝을 위한 학습 데이터를 획득하고, 실시간 객체 인식이 가능한 YOLO(You Only Look Once)기법을 이용하여 학습을 한다. 실험 결과에서는 학습 데이터를 이용하여 $360^{\circ}$영상에서 객체 인식 결과와, 학습 횟수에 따른 객체 인식에 대한 결과를 보여준다.