• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1132-1140
• /
• 1997

In many vision tasks of the major obstacles is the specular highkight of smoth objects, which causes a misinterpretation of objects.This paper presents an dffcient algorithm for highight detection and object reconstruction, blsed on the theory of photometric stereo in which the location of highilight changes as the position of illumination source changes.Two images, referred to as base image and reference image.are sequentially taken with two different positionhs of the two images.The difference image is thresholded to detct the specular spike of the highlight.Then the specu-lar lobe around the specular spike is detected to reconstruct the object.The proposed algorithm can be applied to metals and dielectrics, regardlless of the surface chracteristics.This method can also be aplied to the case when the background is brighter than the object.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2014

A stretchable polymeric membrane shaped diffuser was used to homogenize the coherent laser beam. The developed RGB module was used to focus and defocus test by beam combiners. Average oscillation frequency was set at 180Hz~300Hz and it resulted in the best homogenization effect in visual range. The blue laser module turned out to be the worst case for the transmission and primary reason is believed to be the short length of irradiated laser beam. The developed system removed the speckling and the brightness was decreased by 10 ~ 20% for the RGB laser. Overall the brightness was decreased by 13% and homogenity with respect to the temporal axis was improved from 30fs to 110fs.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1222-1230
• /
• 2015

Segmentation of the anterior cruciate ligament (ACL) in knee MRI remains a challenging task due to its inhomogeneous signal intensity and low contrast with surrounding soft tissues. In this paper, we propose a multi-atlas-based segmentation of the ACL in knee MRI with locally-aligned probabilistic atlas (PA) in an iterative graph cuts framework. First, a novel PA generation method is proposed with global and local multi-atlas alignment by means of rigid registration. Second, with the generated PA, segmentation of the ACL is performed by maximum-aposteriori (MAP) estimation and then by graph cuts. Third, refinement of ACL segmentation is performed by improving shape prior through mask-based PA generation and iterative graph cuts. Experiments were performed with a Dice similarity coefficients of 75.0%, an average surface distance of 1.7 pixels, and a root mean squared distance of 2.7 pixels, which increased accuracy by 12.8%, 22.7%, and 22.9%, respectively, from the graph cuts with patient-specific shape constraints.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.19-28
• /
• 2017

In this paper, we propose a method to reduce the difference in image characteristics when multiple camera images are captured for virtual space production. Sixty-four images were used by cross-mounting eight bodies and lenses, respectively. Image analysis compares and analyzes the standard deviation of the histogram and pixel distribution values. As a result of the analysis, it shows different image characteristics depending on the lens or image sensor, though it is a camera of the same model. In this paper, we have adjusted the distribution of the overall brightness value of the image to compensate for this difference. As a result, the average deviation was the maximum of (Indoor: 6.89, outdoor: 24.23), we obtained images with almost no deviation (Indoor: maximum 0.42, outdoor: maximum: 2.73). In the future, we will study and apply more accurate image analysis methods than image brightness distribution.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.345-347
• /
• 2012

본 논문에서는 4-조각 전립선 병리조직 영상을 기하 보정 및 강체 정합하여 자동 스티칭하는 방법을 제안한다. 4-조각 병리영상에 대하여 총 3번의 스티칭을 수행하는데, 좌, 우 조각영상의 상, 하 영상 간 스티칭을 각각 수행 한 후 좌, 우 조각 영상 간 스티칭을 수행한다. 강체 정합 전 병리 조각의 코너를 이용해 x-축, y-축 방향의 위치보정과 회전보정을 수행하는 기하보정 단계를 거침으로서 지역적 최적해로의 수렴을 방지하며, 강체 정합의 정확성을 높인다. 병리영상은 전체적으로 밝기값이 유사하므로 밝기값이 아닌 외곽선 정보를 이용하여 조각 영상간의 거리를 최소화시켜 강체 정합한다. 실험 결과, 4-조각 전립선 병리조직 영상이 지역적 최적해에 수렴하지 않고, 조각 영상 간 거리를 최소화 하며, 하나로 스티칭 됨을 확인할 수 있었다. 제안 방법의 총 수행 시간은 평균 10.32초로 측정되었다. 본 논문의 제안 방법은 4조각으로 나뉜 전립선 병리조직 영상을 하나로 스티칭 함으로서 해당 조직의 전체 구조 파악 및 조직 내에서의 암의 위치 파악에 사용 될 수 있으며 이를 통한 전립선암의 확진에도 사용 될 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.88-93
• /
• 2012

Lane detection methods using camera, which are part of the driver assistance system, have been developed due to the growth of the vehicle technologies. However, lane detection methods are often failed by varying road conditions such as rainy weather and degraded lanes. This paper proposes a method for lane detection which is robust in varying road condition. Lane candidates are extracted by intensity comparison and lane detection filter. Hough transform is applied to compute the lane pair using lane candidates which is straight line in image. Then, a curved lane is calculated by using B-Snake algorithm. Also, weighting value is computed using previous lane detection result to detect the lanes even in varying road conditions such as degraded/missed lanes. Experimental results proved that the proposed method can detect the lane even in challenging road conditions because of weighting process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.852-859
• /
• 2009

Normally, to extract the defect in TFT-LCD inspection system, the image is obtained by using line scan camera or area scan camera which is achieved by CCD or CMOS sensor. Because of the limited dynamic range of CCD or CMOS sensor as well as the effect of the illumination, these images are frequently degraded and the important features are hard to decern by a human viewer. In order to overcome this problem, the feature vectors in the image are obtained by using the average intensity difference between defect and background based on the weber's law and the standard deviation of the background region. The defect detection method uses non-linear SVM (Supports Vector Machine) method using the extracted feature vectors. The experiment results show that the proposed method yields better performance of defect classification methods over conveniently method.

• The Korean Journal of Applied Statistics
• /
• v.28 no.5
• /
• pp.991-1001
• /
• 2015

Digital images acquired by digital devices are used in many fields. Applying statistical methods to the processing of images will increase speed and efficiency. Methods to remove noise and image quality have been researched as a basic operation of image processing. This paper proposes a novel reduction method that considers the direction and magnitude of the edge to remove image noise effectively using statistical methods. The proposed method estimates the brightness of pixels relative to pixels in the same direction based on a robust regression model. An estimate of pixel brightness is obtained by weighting the magnitude of the edge that improves the performance of the average filter. As a result of the simulation study, the proposed method retains pixels that are well-characterized and confirms that noise reduction performance is improved over conventional methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.941-944
• /
• 2009

In this paper, we present a improved algorithm for thinning vein pattern. The vein image scanned using near infra-red is sliced in the horizontality or verticality direction, and then average value is gained from each slice image. Using curvature value changed from average value, search candidate part and extract vein pattern through re-searched candidate part in overlapping area. For the extracted vein pattern connecting, we proposed a DAL method that verify distance, angle and luminosity on pattern before tracking pattern extracted. The proposed improved thinning method is helpful for accurate connecting of vein pattern more than method used distance material in candidate part.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.319-328
• /
• 2007

In this paper we implemented the Real Time Contrast Enhancer for image quality enhancement of moving picture. Also we proposed adaptive contrast control method that use mean and variance of input video signal. The Designed the contrast Enhancer is measured in comparison with conventional pictures and interfaced to 30inch TFT LCD TV.