• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1547-1555
• /
• 1993

An experimental study on convection heat transfer characteristics from a heated tube to an oscillating flow has been carried out, . This problem is of particular interest in the design of heat exchangers in Stirling cycle machines. Experimental system has been developed to measure temporal variations of temperature inside a heater tube during oscillating modes in a Stirling cycle machine. The dependence of temperature distributions and heat transfer rates on the oscillating frequency as well as the swept volume ratio and the mean pressure of a Stirling cycle machine is investigated in detail. The experimental results indicate that the measured temporal variations of temperature become nearly sinusoidal. The amplitude of temperature variation in the core of the tube is much more substantial than that near the tube wall, whereas the reverse is true for pulsating flows. It is also found that the heat transfer rate is increased significantly as the oscillating frequency or oscillating amplitude or the mean pressure in a tube is increased.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.217-223
• /
• 1991

A capillary method was used to evaluate the properties of mass transfer process and diffusion coefficients in the gel food. Amaranth dye was selected as a diffusant material to visualize the degree of diffusion procedure easily. After contacting cylinder containing agar gel with amaramth dye solution for some hours, the gel was cut to five segments by 0.5 cm in length. The diffusant concentration from the segments were measured by the spectrophotometer at 523 nm. Prediction models for the diffused quantities in gel food were established by the regression program of SPSS package program. Generally, diffusion coefficient can be calculated by Fick's second law, however, it will be determined by using numerical analysis method more easily. Finally the diffusion coefficients in this research were calculated by arithmetic mean of the measured values. As raising gel agent concentration, the mean diffusion coefficient tended to decrease because the obstruction effect came to become significant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.567-575
• /
• 2011

The development of space launch vehicle is an important step to advance to developed countries in the space area. It is also so risky due to necessity of huge costs and longer development period. The accuracy of cost estimation is important to develop a space launch vehicle successfully and efficiently. It is also necessary to estimate production and operation cost in order to develop commercial space launch vehicle possessing competitiveness. In this paper, Korean factors to be able to reflect the current state of workforce, average working hours and technology readiness level in Korea were analyzed to estimate production and operation cost of space launch vehicles that are developed in Korea. Korean factors have been applied to production and operation cost estimation of KSLV-II based on TRANSCOST. We evaluated the competitiveness level of KSLV-II as the commercial launch vehicle in the commercial launch services market by comparing with cost per flight of foreign launch vehicles.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.91-98
• /
• 1997

Most dynamic systems have various random properties m excitation and system parameters. In this paper, a procedure for structural response and reliability analysis is proposed for the linear dynamic system with random properties in both excitation and system parameters. The system parameter and response with random properties are modeled by the perturbation technique, and then the response analysis is formulated by probabilistic and vibration theories. Probabilistic FEM is also used for the calculation of mean response which is difficult by the proposed response model. The first passage analysis by the integral equation method is used to analyze the probability of failure. The integral equation method results in the first passage probability in terms of crossing rates and first passage probability densities. In this study it is assumed that excitations, system parameters and responses are Gaussian. As an application example, the probabilities of failure at transient state are calculated for a sdof system with random mass and spring constant subjected to stationary white-noise excitation and the results are compared to those of numerical simulation.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.257-267
• /
• 2008

This study was conducted to investigate the stress distribution in the prestressed concrete pavement (PSCP) when the transverse post tensioning was applied. By performing the structural analyses using a finite element model of PSCP, the effect of anchor spacing and the relationship between the longitudinal and transverse post tensioning were evaluated. The analysis results showed that as the anchor spacing became smaller, the stresses were more uniformly distributed and the ranges of the stress losses were reduced; however, the economy should be considered. As the anchor spacing became larger, the difference between the average transverse stress and the transverse stresses at various locations such as shoulder, wheel pass, and center of the slab, increased. The transverse post tensioning induced the additional tensile forces in the longitudinal tendons, but the magnitude was negligibly small, and the longitudinal and transverse post tensioning could be designed independently. The use of the transverse stress distribution for the design of the post tensioning was also discussed in this paper.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.184-184
• /
• 2001

캘린더령은 지펼의 표면을 평활하게 하고, 두께를 감소시켜 균일하게 하는 역할을 한다. 그러나 이는 필연적으로 불투명도와 같은 광학적 성질과 인장강도 등의 강도적 성질 의 저하를 유발한다. 따라서 캘린더링 공정변수인 온도, 압력, 속도 등이 종이의 물성에 미 치는 영향을 정확하게 파악하는 것은 캘린더령에 따라 발생할 수 있는 물성 저하를 최소화 하기 위해 필수적으로 요청된다. 본 연구에서는 최근들어 저평량화에 대한 관심이 증가하면 서 그 중요성이 더해지고 있는 불투명도가 캘린더링에 따라 변화되는 양상을 분석하기 위해 서 화상분석 기법을 이용하여 종이의 두께방향 밀도 변이를 평가하고 밀도변이와 불투명도 와의 상관관계를 해석코자 하였다. 또 캘린더링에 따른 불투명도를 저하를 최소화시키기 위 한 캘린더링 조건을 모색하였다. 캘린더링에 의해 발생하는 종이의 두께 변형은 두께방향의 위치에 따라 다르게 나 타난다. 이러한 종이의 두께 방향으로 발생하는 밀도 변이와 이에 따른 불투명도 변화를 평 가하기 위하여 동일한 평량의 종이를 캘린더령 조건을 달리하여 두께방향 밀도변이가 다른 시편을 준비하고 두께 방향 단면을 SEM으로 촬영하였다. 이후 화상분석기를 통해 단면을 이치화하고, 각 픽셀의 흑백 값을 구해 CD방향으로 평균을 내어 두께 방향에 대한 밀도 변 이를 평가하였다. 그 결과 압력보다는 온도를 높여 캘린더링한 경우 종이의 두께 방향 밀도 경사가 커진다는 사실을 확인할 수 있었다. 이는 고온에 의해 표층이 고밀화되고 상대적으 로 내부가 별크해졌기 때문이다. 이러한 밀도 변이가 종이의 광학적 성질인 불투명도에 미 치는 영향을 구명하기 위해서 캘린더링 전후에 두께 및 불투명도를 측정하여 5% 유의수준 에서 회귀분석을 실시하였다. 밀도경사를 지닌 종이의 불투명도를 이론적으로 해석하기 위해 다층 모델을 가정하 고 각 층의 비광산란계수(5)와 비광흡수계수(k)를 달리 부여하고 Kubelka-Munk 이론을 근 거로 하여 이론적 불투명도를 계산하였다. 불투명도에 대한 분석를 통해 동일한 두께 변형 을 가지는 샘플에 대해서 압력보다는 온도를 증가시켜 두께를 감소시키는 캘린더링 처리가 불투명도의 저하를 최소화한다는 것을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.58.2-58.2
• /
• 2011

국립기상연구소는 2000년부터 2010년까지(11년)의 위성자료와 수치모델의 재분석 자료를 이용하여 한반도영역에 대해서 $4km{\times}4km$ 해상도의 태양-기상자원지도를 계산하였다. 이러한 태양-기상자원지도를 기반으로 GIS 분석도구를 이용하여 지역별 태양에너지의 분포와 지역별 태양광의 기후특성을 분석하였다. 연구영역의 행정구역을 구분하고 각 지역별 에너지분포 및 변화특성을 쉽게 분석하기 위하여 GIS 분석도구를 사용하였다. 평균 연누적 태양에너지 자료를 분석한 결과 한반도에서는 경상도가 가장 풍부한 태양광에너지를 받고 있었으며 특히 대구광역시(5047MJ), 부산광역시(5019.4MJ)가 높게 나타났다. 북한지역에서는 함경남도(4719.1MJ)가 가장 풍부한 자원을 가지고 있는 것으로 나타났다. 월별 분포를 분석한 결과 대체로 연누적과 동일하게 남부지방의 경상도가 높은 태양광 에너지를 나타났다. 특히 7월 등의 여름철은 1월에 비해 절대적으로 에너지양이 많았다. 그러나 위도 38도를 중심으로 빈번한 장마전선을 동반한 구름의 이동으로 중부지방이 남부지방과 북부지방에 비해 낮게 나타났다. 또한 2000년 1월부터 2010년 12월까지 월별 시계열 변화를 분석해본 결과 한반도 전역에서 태양광의 증가추세가 나타났다. 특히 부산광역시는 10년간 3.75MJ이 증가하였으며, 서울특별시는 3.645MJ/decade, 함경북도는 3.499MJ/decade의 증가경향을 보였다. 월별 시계열 그래프를 보면 2003년 8월과 2005년 4월을 기준으로 3부분에서 다른 특성이 나타나는데 이것은 각 구간별로 구름산출을 위하여 사용된 정지기상위성이 다르기 때문이다. 각 구간에서 사용된 위성은 GMS-5(2003년 8월 이전), GOES-9(2003년 8월~2005년 3월) 그리고 MTSAT-1R(2005년 4월이후)이다. 추후에는 태양광 자원이 풍부한 지역에 대해서 더욱 상세하게 태양광 에너지의 분포와 변화를 분석해보자 한다. 이러한 지역별 자원분석 자료는 지방자치단체들이 신재생에너지 개발계획을 세우는데 도움을 줄 수 있을 것이다.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.305-312
• /
• 2011

Because groundwater recharge shows spatial-temporal variability due to climatic conditions, it is necessary to investigate land use and hydrogeological heterogeneity, and estimate the spatial variability in the daily recharge rate based on an integrated surface-groundwater model. The integrated SWAT-MODFLOW model was applied to compute physically based daily groundwater recharge in the Jincheon region. The temporal variations in estimated recharge were calibrated using the observed groundwater head at several National Groundwater Monitoring Stations and at automatic groundwater-monitoring sites constructed during the Basic Groundwater Investigation Project (2009-2010). For the whole Mihocheon watershed, including the Jincheon region, the average groundwater recharge rate is estimated to be 20.8% of the total rainfall amount, which is in good agreement with the analytically estimated recharge rate. The proposed methodology will be a useful tool in the management of groundwater in Korea.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.1
• /
• pp.311-332
• /
• 2011

The purpose of this study was to establish core elements required for the implementation of multicultural library services, to analyze the features of each element, and to develop a model of effective multicultural library services. This model was aimed to improve multicultural services and programs currently managed on a short-term basis by public libraries in Korea and help those libraries develop more systematic and long-term multicultural services. To proceed with this study, the literature review, a case study and a survey(the exploratory factor analysis, T-test and ANOVA analysis) were conducted. In this study, it is found that more effective operation of multicultural services in public libraries requires cooperation and integration with not only other libraries and related social and educational institutions in a community, but also international network. Based on this idea, the model of operating multicultural services in public libraries in Korea was proposed in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.122-129
• /
• 2015

In this study, a prediction model for the effective compressive strength of corner columns with intervening normal strength concrete slabs was developed. A structural analogy between high-strength concrete column-normal strength concrete slab joint and brick masonry was used to develop the prediction model. In addition, the aspect ratio of slab thickness to column dimension was considered in the models. The reliability of the new prediction model was evaluated by comparison with experimental results and its superiority was demonstrated by comparison with previous models proposed by design codes and other researchers. As a result, with average test-to-predicted ratios of 1.09, a standard deviation of 0.15, the newly developed equation provided superior predictions in terms of accuracy and consistency over all of the existing effective strength prediction approaches including KCI structural concrete design code (2012).