• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.97-105
• /
• 2001

Objectives: The objective of this study was to investigate the Associated factors of bone mineral density in postmenopausal was measured for 36 normal in the women from July 14.2000 to august 24,2000. Methods: The data were collected from women who visited Physical Examination Center of a Catholic university hospital located in Taegu. Bone mineral density(BMD) of lumbar spine was measured using energy absorptiometry. Results: The bone mineral density of the lumbar spine decreased with aging. The bone mineral density of the lumbar spine increased with number of delivery and number of abortion decreased. The mean bone mineral density of the lumbar spine of postmenopausal women in age less than 50 and 50 ${\sim}$ 59 were 0.79 g/c$m^2$, the lumbar spine of postmenopausal women in age greater than 60 was 0.69 g/c$m^2$. The mean bone mineral density of the lumbar spine of postmenopausal women in mean age 56.1. Conclusions: In the multiple regression of risk factors to bone mineral density(BMD) of lumbar spine were correlated with bone mineral density T-scores(p<0.05). Osteoporosis is a major public health problem among the elderly, demanding effective strategic approach for prevention and treatment.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2003.10a
• /
• pp.68-68
• /
• 2003

최근 대두로 성인병을 예방하고 치유하자는 움직임이 세계적으로 활발히 진행되고 있다. 대두는 오래 전부터 중요한 단백질 식량자원으로서 이용되어 왔으며 그 조성을 살펴보면 단백질 35∼40%, 지질 20% 내외를 함유하고 영양성분이 풍부하다. 대두의 최다 성분인 단백질은 암 예방과 고혈압치료에 효과가 있으며, 콜레스테롤 강하작용을 겸하고 있으며, 대두체로 100g당 평균 213mg 정도의 칼슘이 함유 되어 있어 골다공증 치유에도 유효하다고 한다. 최근 우리나라는 골다공증인구가 점차 증가되고 있으며, 기능성식품시대에 돌입한 식품업계는 칼슘함량이 높은 기능성 신소재 발굴에 혈안이 되어 있는 실정이다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.39-39
• /
• 1993

반도성 세라믹 광촉매 막 반응기 (membrane reactor)에 의한 난분해성 유독 유기물질의 분해공정을 개발하기 위한 기초연구로서 $TiO_2$ 막 반응기의 formic acid 및 trichloromethane에 대한 광분해 효율이 연구되었다. 막 반응기는 용액의 정밀여과 (microfiltration)는 물론 유기물의 광분해를 동시에 수행할 수 있도록 다공성 $TiO_2$ 튜브 (평균기공 : $0.2 \mu m$)를 이용한 새로운 타입으로 ㅐㄱ발되었으며 광원으로는 365 nm 파장을 갖는 UV를 사용하였다. 또한 반응기의 광분해 효율을 증진시키기 위하여 슬립케스팅법으로 제조한 $TiO_2$ 튜브표면을 $TiO_2$ 졸로 코팅하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.67-67
• /
• 1995

Metal-working lubricants, metal-finishing bath wastes, mechanical oil-water emlsion 등과 같은 공업 폐수들은 보통 0.1 $\mu$m 이하의 크기를 가지는 oil-in-water 에멀젼이 약 2 wt% 정도 포함되어 있어, oil의 함량이 30 wt% 이상이 되도록 농축시킨다면 재사용이 가능하게 되며, 정밀여과막이나 한외여과막으로 oil을 분리할 수 있다. 본 실험에서는 압출성형법으로 제조한 튜브형 다공성 $\alpha-Al_2O_3$ 담체(평균 기공 크기 = 0.7 $\mu$m, 길이:200,600mm, 직경:8mm, 두께:0.8mm) 위에 슬립 캐스팅법을 이용하여 TiO$_2$ 막을 코팅한 후 925$\circ$C에서 2시간 동안 열처리하여 정밀여과용 세라믹 막을 제조하였다.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1857-1862
• /
• 2004

EK pumps packed with particles inside capillaries are involved in the mixed electroosmotic flow and pressure driven flow. For analysis in the porous EK pumps, the volume-averaging technique is applied to derive the volume-averaged equations for momentum and electrical potential. By using the volume-averaged equations, analytical solutions for electric potential and velocity distribution due to the mixed electroosmotic and pressure driven flows are obtained. The present analysis is validated by comparison with numerical and experimental results for the case of microchannel EK pumps.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.41-46
• /
• 2001

The effect of organic additives such as PEG ind MPS on throwing power have been studied in the fabrication of porous reticular metal by electrodeposition using the mixture of cupric sulfate and sulfuric acid as electrolyte. Both the polarization test and the electrodeposition on the stacked electrodes, mean pore diameter of which was $250{\mu}m$, were performed to illustrate the behavior of throwing power quantitatively. As far as PEG was concerned, it lowered throwing power of electrodeposition on the porous electrode used in this work while the addition of MPS up to 500 ppm in electrolyte enhanced throwing power monotonously. When both MPS and PEG were added in electrolyte, the effect of MPS on throwing power was superior to that of PEG. However, the excess addition of MPS was found to cause the defect in mechanical strength of deposit layer. From the result of SEM observation, it could be concluded that less than 50 ppm of MPS in electrolyte was appropriate to avoid the breakage of deposit layer.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1213-1219
• /
• 2003

Porous ceramics for microoganism carriers were prepared with amorphous alumina and pore formers by hydrothermal reaction, burn-out and wash-out method. Activated carbon with average size of 67,222, and 405 $\mu\textrm{m}$, organic polymer and inorganic salt were used as pore formers. Specimens were hydrothermally treated at 200$^{\circ}C$ for 24 h, heat-treated at 650$^{\circ}C$ for 5 h, and washed out at 80$^{\circ}C$ for 48 h. The formation of crystalline phase, porosity, pore size distribution and compressive strength were measured. The specimen with activated carbon was transformed to boehmite phase, but organic polymer and inorganic salt inhibited the aquohydroxoy complex gel and crystalline formation. The porous ceramics for microoganism carriers using activated carbon as a pore formers was successfully prepared, which is composed of ${\gamma}$-alumina phase with porosity of above 70 vol% and the compressive strength of 40 kgf/$\textrm{cm}^2$.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.259-267
• /
• 2006

The critical breakthrough pressure through both porous PVDF (polyvinylidenefluoride) and PTFE (poly-tetrafluoroethylene) was measured using pure water, $0.1M{\sim}4.0M$ NaOH aqueous solutions and $0.1M{\sim}3.0M\;NaHSO_3$ aqueous solutions. The critical breakthrough pressure through PTFE was observed to be higher than that through PVDF membrane at the same pore size. The critical breakthrough pressure decreased as the molar concentration of NaOH increased up to 1.0 M reaching the minimum and then increased further after 1.0 M NaOH up to 4.0 M NaOH. On the other hand, the critical breakthrough pressure measured using $NaHSO_3$ aqueous solutions was decreased with increasing the concentration of $NaHSO_3$. The critical breakthrough pressure could be well interpreted with Cantor's equation.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.300-309
• /
• 1993

Abstract In this work. gasification of graphite cores from nickel-coated graphite composite powders was carried out to munufacture the hollow nickel metal powders which can be used as a raw materials for porous nickel metal strips. Graphite cores were gasified by $H_2O-H_2$ mixture gases at the temperature between $800^{\circ}C$ and $900^{\circ}C$ and nearly all removed from the composite powders within 1 hour. The hollow nickel metal powders prepared from 82.2wt. % Ni-17.8wt. % C composite powders which have the graphite cores of 21${\mu}$m average size were pressed and sintered at $1150^{\circ}C$ for 1 hour in vacuum furnace. The porosities of green and sintered compacts were 45% and 30%. respectively, and pores were distributed very homogeneously in the sintered compact. It was confirmed that pore distribution and porosity in porous materials can be easily controlled by using hollow powders as a raw materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.92-102
• /
• 2020

Porous pavement (PP) has attracted attention as a new alternative measure against road traffic noise. PP refers to pavement that reduces the fines in the asphalt mixture to form voids. These voids can reduce traffic accidents and friction noise. For active application, verification of the noise reduction effect is required. In this study, the noise reduction of single-layer PP(SLPP) and double layer PP(DLPP) was analyzed. First, the Sejong section was selected, and traffic noise was measured using the SPB method on the roadside. The traffic volume, speed, and mixing ratio of large vehicles were measured. As a result, the DLPP was evaluated to be 7.95 dB(A) smaller on average and 7.57dB(A) smaller at the 95% reliability level than the SLPP. The traffic volume was more influential than the speed and the mixing rate of large vehicles. As the traffic volume increased, the noise increased, but the difference in noise between the two pavements decreased gradually. The results showed that the most effective way to reduce road traffic noise is to change the road pavement rather than reduce traffic speed, restrict traffic for heavy vehicles, or reduce traffic volume.