• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.23-28
• /
• 1973

In this survey, to estimate volume growth of pitch pine (Pinus rigida Mill) stand, diameter growth was estimated. Among 223 sample trees, the number of rejected trees was 12, about 5 percent of total sample trees. The stand showed uniform growth and rejected trees included insect-damaged trees. Compared with reports made on forest classification basis, pitch pine a single species showed faster growth. Minimum, average and maximum value of D.B.H and mean annual diameter growth, of 16 year old pitch pine stand, were as follow. The correlation of each factors estimated by 9590 of confidence interval is shown in the table of correlation as bellow.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.298-304
• /
• 2019

In this paper, the analytical method to derive wind fragility for urban street tree in Korea was shown. Monte Carlo Simulation method was used to determine the probability of failure for urban street tree. This probability result was used to determine wind fragility parameters for four types of tree based on the study of street tree species in urban area in Daegu, Korea. Wind fragility for street tree was presented in terms of median capacity and standard deviation of the natural logarithm of the capacity. Results showed that the dominant factor affecting the probability of failure of tree under wind load was their diameter. Moreover, amongst the four types of tree chosen, the tree with height 7m and diameter 35cm had the lowest probability of failure under wind loading, whereas the tree with height 8m and diameter 30cm could resist the least wind loading. The median failure wind speed for urban street tree with height 7m were 43.8m/s and 50.6m/s for diameter 30cm and 35cm, respectively. Also, for tree with height 8m, their median failure wind speeds were 38.7m/s and 45.4m/s for tree with diameter 30cm and 35cm, respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.287-297
• /
• 2016

This study aims to identify the relationship between climatic factors and stand mean Diameter at Breast Height (DBH) for two major tree species; Pinus densiflora and Quercus mongolica in Andong-dam basin. Forest variables such as age, diameter distribution and number of trees per hectare from the $5^{th}$ and $6^{th}$ National Forest Inventory data were used to develop a DBH estimation model. Climate data were collected from six meteorological observatory station and twelve Automatic Weather System provided by Korea Meteorological Administration to produce interpolated daily average temperature map with Inverse Distance Weighting (IDW) method. Andong-dam basin reflects rugged mountainous terrain, so temperature were adjusted by lapse rate based correction. As a result, predictions of model were consistent with the previous studies; that the rising temperature is negatively related to the growth of Pinus densiflora whereas opposing trend is observed for Quercus mongolica.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.311-318
• /
• 2022

We conducted this study to derive the site index, which is a criterion for the planting of Robinia pseudoacacia, a honey plant, and to investigate the diameter distribution change by derived site index. We applied the Chapman-Richards equation model to estimate the site index of the Robinia pseudoacacia stand. The site index was distributed within the range of 16-22 when the base age was 30 years. The fitness index of the site index estimation model was low, but we judged that there was no problem in the application because the residual distribution of the equation had not shifted to one side. We used the Weibull diameter distribution function to determine the diameter distribution of the Robinia pseudoacacia stand by site index. We used the mean diameter and the dominant tree height as independent variables to present the diameter distribution, and our analysis procedure was to estimate and recover the parameters of the Weibull diameter distribution function. We used the mean diameter and the dominant tree height of the Robinia pseudoacacia stand to show distribution by diameter class, and the fitness index for dbh distribution estimation was about 80.5%. As a result of schematizing the diameter distribution by site indices as a 30-year-old, we found that the higher the site index, the more the curve of the diameter distribution moved to the right. This suggests that if the plantation were to be established in a high site index stand, considering the suitable trees on the site, the growth of Robinia pseudoacacia woul d become active, and not onl y the production of wood but al so the production of honey would increase. We therefore anticipate that the site index classification table and curve of this Robinia pseudoacacia stand will become the standard for decision making in the plantation and management of this tree.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.59-70
• /
• 2021

This study was to investigate the measurement point of root collar diameter of landscape trees in Korea. It may contribute to avoiding disputes caused by the difference in measurement criteria of root collar diameter of landscape trees between tree growers and constructors. The difference between landscape trees' root collar diameter measurement point was 3.59cm from 6cm underground to the surface and 1.35cm from 0cm to 6cm above ground. The source root collar diameter measurement point difference was larger in the basement than in the ground. The standard deviation of the root collar diameter of the landscape tree was 0.64 from 6cm underground to the surface, and the difference in standard deviation from 0cm to 6cm above ground was 0.16. The difference by measurement point of the root collar diameter was larger in the basement than in the ground. It has been proposed to set the reasonable measurement point of the landscaping tree root collar diameter at the inflection point where the standard deviation of the tree trunk diameter is the smallest in line with the size change of the standard for each root collar diameter measurement point. By tree species, Cornus officinalis Siebold & Zucc. 18cm above the ground, Chionanthus retusus Lindl. & Paxton. 12cm above the ground, Zelkova serrata (Thunb.) Makino. 12cm above the ground, Celtis sinensis Pers. 12cm above the ground, Styrax japonicus Siebold & Zucc. 10 cm above the ground, Cornus officinalis Siebold & Zucc. 10cm above the ground, Acer palmatum Thunb. ex Murray. 6cm above the ground, Ilex rotunda Thunb. 6cm above the ground, Quercus myrsmaefolia Blume. 4cm above the ground, Lagerstroemia indica L. 2cm above the ground The above heights were shown as reasonable measurement points. The difference by landscape tree root collar diameter measurement site showed that the standard deviation was small throughout the tree species, and the reasonable average measurement point with a stable slope of the deviation was 12cm or more on average. It can be said that the reasonable measurement point of the root collar diameter of a landscape tree is set at an average of 12cm above the ground. However, recognizing 30cm, which is a familiar ruler(尺) in traditional practices, is quick, It was recommended to measure at the height of 30cm from the surface for a reasonable measurement point of the root collar diameter of a landscape tree, for the uniformity of measurement standards.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.699-704
• /
• 2001

The purpose of this study is to present the atomization characteristics of 2-phase internal mixing nozzle. The obtained results are considered as the essential information of understanding the spray characteristics from the nozzle exit of an aerated nozzle. In this study, SMD and AMD are mainly measured at the distance of Z=10, 20, 50, 80, 120 and 170mm from the nozzle tip. The liquid flow rate was kept at 1.8g/s and the air feeding pressure was changed from 10kpa to 100kpa increasingly. The analysis of the acquired data was performed by 2-D PDPA system and in order to get the realibility, the number of data used in calculating the SMD & AMD were 10,000 samples.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.123-130
• /
• 1992

We check up on whether the one-dimensional station precipitation model of Geogakakos and Bras is suitable to the storm model for Chonju station or not. The fundamental variables of the physically based model consists of the pressure at the cloud top, the hight-averaged updraft velocity(HAUV), and the inverse of the average diameter of the hydrometeors(ADH) at cloud base. And they are parameterized by input variables. The parameters are eastimated by the direct search algorithm of Hooke and Jeeves in this paper. The results show that HAUV and ADH are dominant factors to minimize root mean square error between the calculated and the observed rainfall. In this numerical analysis, the deviation between the calculated and the total observed rainfall is small, otherwise the gap for the time distribution is quite big.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2018

Electric motors for electric vehicles differ in efficiency characteristics depending on the operation modes, studies for evaluating high efficiency characteristics in low speed and high speed operation modes are very important. Therefore, it is necessary to design method that can change the high torque, high output density, and high efficiency characteristics of driving motors for electric vehicles. In this paper, the diameter ratio of stator and rotor for the interior permanent magnet synchronous motor is change of designed 0.62, 0.65, and 0.68, respectively, and the efficiency characteristics of the entire operation section, average efficiency characteristics of the city driving modes and express highway driving modes are analyzed. As a result of analyzing the efficiency characteristics of the entire operating section, it was confirmed that as the diameter ratio increases, the high efficiency section moves to the low speed and low torque section and the high efficiency section moves to the high speed and low torque neighborhood as the diameter ratio decreases. As a result of analyzing the average efficiency characteristics in the city driving modes and express highway driving modes, the average efficiency of 0.68 model is analyzed to be more efficient than the 0.63 and 0.65 model ratio, and it is confirmed that it is suitable for city driving modes and express highway driving modes.

• Korean Journal of Environment and Ecology
• /
• v.13 no.3
• /
• pp.280-287
• /
• 1999

본 연구는 우리나라 특산식물인 히어리 군락이 지리산 국립공원 동부지역에 대규모로 분포하고 있는 것을 처음으로 발견하여 군락지의 분포 및 맹아지 특성 그리고 군락의 보호대책을 위한 기초자료를 축적하고자 수행되었다. 각 계층별 중요치는 교목층에서 소나무(134.15) 일본잎갈나무, 산벚나무, 비목나무, 신갈나무 등이 우점하였고 아교목층에서는 히어리, 거제수나무. 비목나무, 졸참나무, 노각 나무 그리고 관목층에서는 히어리가 우점하였으며 그 외에 철쭉꽃, 진달래, 생강나무 등이 출현하였다 그리고 맹아지 특성은 1개 방형구(25m2)에 평균 17.75개의 주간이 형성되고 1개 주간당 맹아지 수는 평균 6.00개 고사지는 2.80개로 조사되었다. 흉고직경급별 분포에서 생장지의 경우 흉고직경 1.0-4.0cm 구간에서 전체의 64.78%를 차지하였으며 대부분 2.0-3.0cm 구간에서 54.74%를 차지하여 히어리 군락의 중심계급이었다 흉고직경 1.0cm 이하의 고사지가 전체의 53.16%를 차지하였는데 이는 근주에서 돋아나는 1년생 맹아지가 대부분 고사하였기 때문이었다 특히 히어리의 번식습성은 실생묘에 의한 번식도 가능하지만 본 조사지에서와 같이 수관이 울폐된 지역에서는 주로 근맹아에 의한 번식을 더 선호하는 것으로 나타났다.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.71-76
• /
• 1995

This study on Pinus desiflora in Kangwon Province has been performed for the purpose of classifying its growth area by geographical factors. To classify its growth area, the basic data which had were the measured values for annual ring width from cores were used. Individual variations in the measured values were removed through the standardization. Regional mean chronologies were estimated from the standardized values. The growth area was classified by the cluster analysis on the basis of the regional mean standardized indices. The results of this study shown that annual growth patterns to be clustered similar to geographical distribution in Kangwon Province. And the regional variations of annual growth patterns in the western part of Kangwon province were greater than those in the eastern part of Kangwon province.