• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.343-349
• /
• 2013

Data including 1,372,050 milk records pertaining to 438,019 cows from 1983 to 2011 collected during performance tests conducted by the National Livestock Cooperative Dairy Improvement Center were used to calculate milk income and profit of individuals and investigate the effects of production levels of early lactation (parity 1 and 2, respectively). Individuals with a moderate level of early lactation stayed longer in herds. Among parity 1, the 9,000 kg or higher group had a lower mean number of lactations than the overall mean of 3.13. The 7,000 kg or lower and 10,000 kg or higher groups had lower mean life time milking days than the overall mean of 1,076.8 days. Standard deviations of lifetime traits tended to decrease as production levels increased. For parity 2, the 11,000 kg or higher group had a lower mean number of lactation than the overall mean of 3.43. The lifetime milking days was highest in the 12,000 kg group (1,212.0 days), and generally smaller in the lower groups. Profit increased as the production level of groups increased for both parity 1 and 2. In groups with low production levels, profit of parity 1 was higher than that of parity 2, while the reverse was true in groups with high production levels. These results suggest that individuals in the low production groups had a greater likelihood to be culled due to reproductive or other problems. Furthermore, the accuracy of the prediction of lifetime profit of individuals with a milk yield of 305 days seems to be higher for parity 2 than parity 1; therefore, it is desirable to predict lifetime profit using the 305d milk yield of parity 2. In conclusion, breeding goals are based on many factors in functions for the estimation of profit; however, production levels during early lactation (parity 1 and 2) can be used as indicators of profit to extend profitability.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2010

The paper describes the objectives of Yellow Sea Large Marine Ecosystem (YSLME) project, focusing on procedural and practical aspects. YSLME is a highly productive sea yet possibly one of the most impacted large marine ecosystems, in terms of anthropogenic stressors, due the enormous coastal population. The aim of the YSLME project is the reduction of ecosystem stress through identification of the environmental problems in the Transboundary Diagnostic Analysis (TDA) that are then addressed in the Strategic Action Programme (SAP). One of the major problems found to be affecting biological diversity is habitat modification through wetland reclamation, conversion and degradation. Since the early 1900's more than 40% of intertidal wetlands have been reclaimed in Korea, and 60% of Chinese coastal wetlands have been converted or reclaimed. Damaging fishing practices, pollution and coastal eutrophication have further degraded the coastal environment reducing the biological diversity. To combat this loss, the YSLME project has mounted a public awareness campaign to raise environmental consciousness targeted at all different levels of society, from politicians at parliamentary workshops, local government officer training events, scientific conferences and involvement of scientists in the project research and reporting, to university and high school students in our visiting internship programmes and environmental camps. We have also built networks through the Yellow Sea Partnership and by liaising and working with other environmental organizations and NGOs. NGO's are recognised as important partners in the environmental conservation as they already have extensive local networks that can be lacking in international organisations. Effective links have been built with many of these NGOs through the small grants programme. Working with WWF's YSESP project and other academic and research institutions we have conducted our own biodiversity assessments that have contributed to the science-based development of the SAP for the YSLME. Our regional targets for biodiversity outlined in the SAP include: Improvements in the densities, distributions and genetic diversity of current populations of all living organisms including endangered and endemic species; Maintenance of habitats according to standards and regulations of 2007; and a reduction in the risk of introduced species. Endorsement of the SAP and its successful implementation, during the proposed second phase of the YSLEM project, will ensure that biological diversity is here to benefit future generations.

• The Journal of the Korean life insurance medical association
• /
• v.22
• /
• pp.139-169
• /
• 2003

국내 보험 산업은 경제발전에 따라 많은 성장을 이루어왔으나 단체보험은 보험 회사의 외부적 또는 내부적 환경으로 인해 활성화가 미흡한 상황이다. 개인보험시장의 포화, 해외시장에서 단체보험의 지속적인 성장, 사회보험 민영화 논의, 방카슈랑스와 보험시장의 개방 등 급격한 변화를 겪고 있는 보험영업환경을 고려한다면 향후 확대될 기업복지시장에서의 성공적 역할수행을 위해서는 단체보험 영업과 지원시스템의 보완이 시급한 과제라고 할 수 있다. 특히 언더라이팅 기법은 단체보험의 핵심역량이며 회사의 경쟁력 강화와 사차익 안정화를 위해서는 단체보험 인수기법의 선진화가 필수요건이다. 단체보험은 대수의 법칙, 수지상등의 원칙 등 보험의 기본원리라는 측면에서는 개인보험과 다른 점이 없지만 하나의 계약을 통해 집단의 피보험자에게 보장을 제공하기 때문에 가지게 되는 역선택 축소, 비용절감, 기업에 의한 1차선택 등 몇 가지 특성들은 인수기법에서의 차이를 필요로 한다. 하지만 국내의 단체보험 언더라이팅은 기본개념조차 제대로 정립되어 있지 못한 초기단계로 단체보험의 특성을 제대로 반영할 수 있는 위험평가를 위해서는 선진기법의 도입이 절실하다. 첫째, 자유보장한도(FREE COVER LIMIT)의 도입이다. 자유보장한도는 단체에 대한 위험과 피보험자 개인의 위험을 구분하는 기준으로 자유보장한도내의 피보험자에 대해서는 고지나 의적 검사를 요구하지 않고 개인별 언더라이팅을 하지 않으며 거절체나 표준하체이더라도 자유보장한도 금액까지는 나머지 정상 피보험자들과 동일한 보장을 제공하는 것을 말한다. 이는 피보험자별 위험을 중심으로 심사하고 있는 현재의 국내 단체보험 인수방법에서 발생되는 고객측 불만과 심사의 비효율성을 개선할 수 있는 방안이다. 둘째, 단체별 특성에 따른 보험요율 차등화이다 단체는 산업의 종류, 피보험자의 직무, 지역적 위치, 크기(피보험자수), 성별구성비 등 여러 가지 특성들을 가지고 있으며 이런 특성들은 보장급부에 따라 발생위험에 영향을 미칠 수 있다. 하지만 현재 나이와 성별에 따라서 피보험자별로 정해지는 요율체계만으로는 이런 위험들을 적절하게 반영하지 못하고 단체별 형평성에도 문제가 생긴다. 따라서 정확한 data 구축을 통해 단체 특성별로 어떤 보장에 어느 정도로 위험 발생에 영향을 미치는지를 분석하여 보험요율을 차등부과 할 수 있는 체계를 갖추어야 한다. 셋째, 경험을 활용한 보험료 산정기법이다. 이것은 개인보험과 구분되는 가장 큰 단체보험만의 특성이라 할 수 있는데 해당 단체의 과거 경험 data 즉 청구로 인한 지급금액을 토대로 당해 계약 보험료를 결정하는 방법이다. 이를 위해서는 과거 경험 data가 얼마나 신뢰할 수 있는 지의 정도(신뢰도)를 측정하는 것이 필요하다. 과학적이고 효율적인 단체보험 인수를 위해서 경험율의 활용은 반드시 이루어져야 할 선결과제이다. 넷째, 관련규정의 정비가 필요하다 단체보험의 특성을 갖기 위해서는 가입가능한 피보험자들의 자격규정(eligibility), 활동적근무 조건(actively at work)이 요구되어야 하며 참여비율(가입비율)과 보장수준의 구성방법에 대해서도 가이드라인 설정을 통해 역선택을 최소화 할 수 있는 제도적 보완이 마련되어야 한다. 이런 선진인수기법의 도입과 함께 단체보험 언더라이터의 필요역량을 개발하고 향상시키는 노력도 병행되어야만 종합금융화, 대형화가 진전되면서 대경쟁의 구도로 바뀌고 있는 국내 보험시장에서의 경쟁력 확보가 가능할 것이다.

• Korean Journal of Psychosomatic Medicine
• /
• v.21 no.1
• /
• pp.18-26
• /
• 2013

Objectives : Type D personality was originally introduced to study the role of personality in predicting outcomes of heart disease. However, researches showed that other medical conditions are also affected by this personality. The purpose of this study was to evaluate the relationship between type D personality and somatic symptom complaints in depressive patients. Methods : Eighty-two individuals diagnosed with depressive disorder were included. Type D personality was measured with DS14. Patient Health Questionnaire(PHQ) 9 and 15 were used to measure depression severity and somatization tendencies. For alexithymia, TAS-20 was used. Student T-test and linear regression analysis were performed. The best regression model was determined by stepwise variable selection. Results : More than half of the subjects(56%) complained at least medium degree somatic symptoms according to PHQ-15 criteria. Two-thirds of the subjects were classified as Type D personality(63.4%). The mean PHQ-15 score of the Type D individuals was significantly higher than the remaining subjects(PHQ-15 mean=12.7, $p=8.2{\times}10^{-7}$). The best regression model included age, PHQ-9 score and NA subscale score as predictor variables. Among these, only the coefficients of age($p=1.5{\times}10^{-3}$) and NA score($p=1.5{\times}10^{-7}$) were found to be statistically significant. Conclusions : The result showed that Type D personality was one of the strong predictors of somatic complaints among depressive individuals. The finding that negative affectivity rather than social inhibition was more closely associated with somatization tendencies does not fully agree with the traditional explanation that inability to express negative emotion predispose the individuals to somatic symptoms. The finding that alexithymia was not shown to be a significant predictors also substantiated this discrepancy. However, it might be possible that the high correlation between NA and SI subscore(r=0.65) and between NA and TAS-20 score(r=0.44) hid the additional effects of social inhibition and alexithymia. Further research with a larger sample would be needed to investigate the effects of the latter two components over and above the effect of negative affectivity on the somatic complaints in depressive patients.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.8
• /
• pp.789-797
• /
• 2008

This study was conducted to investigate removal characteristics of gaseous trimethylamine(TMA) through biofilter packed with waste tire-chips. The sludge in this experiment was collected from an activated sludge operated in a wastewater treatment facility treating malodorous pollutants. The nominal amount of collected sludge was inoculated through packing materials in the filter. The removal efficiencies for varying concentrations and SVs(Space velocity) were assessed based on TMA, COD$_{Cr}$, NO$_3{^-}$-N, NO$_2{^-}$-N, NH$_4{^+}$-N and EPS(Extracellular Polymeric Substances) in leachate, since biofilter had been steady-stately operated. The influent concentration of 10 ppm of TMA was removed to approximately 95% regardless of changing SV at 120 and 180 hr$^{-1}$, but it was lowered to 80 to 90% at SV 240 hr$^{-1}$. As influent concentration was gradually increased from 5 to 55 ppm, the removal efficiencies of TMA were initially high for 95% in the range of 5 to 10 ppm, but lowered to 80% for 10 to 30 ppm. As a part of kinetic study for TMA decomposition, V$_m$(maximum substrate removal rate) and $K_s$(substrate infinity coefficient) were 14.3 g$\cdot$m$^{-3}$$\cdot$h$^{-1}$ and 0.043 g$\cdot$m$^{-3}$, respectively while adapted period was shown in the range of 100 to 150 hr. Also, the EPS concentration was consistently observed from the leachate showing 100 to 200 ppm, which indicates that biofilm has been continuously formed and sustained throughout tire-chips packed reactor.

• The Korean Journal of Pharmacology
• /
• v.27 no.2
• /
• pp.211-214
• /
• 1991

SJ-200 is an oral liquid preparation of acetaminophen, ibuprofen, Dl-methyleph edrine HCl, caffeine, chlorpheniramine maleate, guaifenesin and dextromethorphan HBr, which is indicated when there is a need to improve various cold symptoms such as headache, sore throat, fever, or cough etc. Thirty patients was enroled for this study fro June to July, 1991. They were given one bottle (30 ml) of SJ-200 t.i.d dy P.O for an average of one to seven days. 1) Twenty-eight patients (84.8%) were relieved from the symptoms of upper respiratory tract infection. 2) Side effects with this preparation occured in 8 patients924.2%) but in four patients, they were mild, which wee transienty by the discontinuation f the medication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3734-3740
• /
• 2014

The aim of this study was provide basic information and establish the criteria in radiation therapy planning by measuring the absorbed neutron dose of normal tissues and lesions according to the number of portals. From September 2013 to January 2014, 20 patients who were diagnosed with prostate cancer and were previously treated with radiation therapy were replanned retrospectively to measure the absorbed neutron dose distribution according to the number of portals. The absorbed neutron dose was measured in each of the 5, 7 and 9 portals using a 15 MV energy, which meant a therapeutic dose of 220 cGy. The optical stimulation luminescence dosimeter was separated by 20cm and 60cm away from the center of the field of view. As a result, the average radiation dose in the abdomen appeared to have a positive relationship with the number of portals, which was statistically significant (p<.05). The average radiation dose was $4.34{\pm}1.08$. The average radiation dose in the thyroid was $2.71{\pm}.37$. Although it showed a positive relationship with the number of portals, it did not have statistical significance. The number of portals and the neutron dose depending on the position showed a significant positive relationship, particularly in the abdomen. As a result of linear regression analysis, as the number of the portal increased in steps, the average volume of the neutrons increased significantly (0.416 times). In conclusion, efficient selection of the number of portals is needed considering the difference in the absorbed neutron dose in the normal tissues depending on the number of the portals.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.874-885
• /
• 2011

In this study, the urban $CO_2$ emission based on energy consumption (Coal, Petroleum, Electricity, and City Gas) in 16 provincial and metropolitan city governments in South Korea was evaluated. For calculation of the urban $CO_2$ emission, direct and indirect emissions were considered. Direct emissions refer to generation of greenhouse gas (GHG) on-site from the energy consumption. Indirect emissions refer to the use of resources or goods that discharge GHG emissions during energy production. The total GHG emission was 497,083 thousand ton $CO_2eq.$ in 2007. In the indirect GHG emission, about 240,388 thousand ton $CO_2eq.$ was occurred, as 48% of total GHG emission. About 256,694 thousand ton $CO_2eq.$ (52% of total GHG emissions) was produced in the direct GHG emission. This amount shows 13% difference with 439,698 thousand ton $CO_2eq.$ which is total national GHG emission data using current calculation method. Local metropolitan governments have to try to get accuracy and reliability for quantifying their GHG emission. Therefore, it is necessary to develop and use Korean emission factors than using the IPCC (Intergovernmental Panel on Climate Change) emission factors. The method considering indirect and direct GHG emission, which is suggested in this study, should be considered and compared with previous studies.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.396-407
• /
• 2020

As fossil fuels are depleted worldwide, alternative resources is required to replace fossil fuels, and biofuels are in the spotlight as alternative resources. Biofuels are produced from biomass, which is a renewable resource to produce biofuels or bio-chemicals. Especially, in order to substitute fossil fuels, the research focusing the biofuel (biodiesel) production based on CO₂ and biomass achieves more attention recently. To produce biomass-based biodiesel, the development of a supply chain network is required considering the amounts of feedstocks (ex, CO₂ and water) required producing biodiesel, potential locations and capacities of bio-refineries, and transportations of biodiesel produced at biorefineries to demand cities. Although many studies of the biomass-based biodiesel supply chain network are performed, there are few types of research handled the uncertainty in CO₂ supply which influences the optimal strategies of microalgae-based biodiesel production. Because CO₂, which is used in the production of microalgae-based biodiesel as one of important resources, is captured from the off-gases emitted in power plants, the uncertainty in CO₂ supply from power plants has big impacts on the optimal configuration of the biodiesel supply chain network. Therefore, in this study, to handle those issues, we develop the two-stage stochastic model to determine the optimal strategies of the biodiesel supply chain network considering the uncertainty in CO₂ supply. The goal of the proposed model is to minimize the expected total cost of the biodiesel supply chain network considering the uncertain CO₂ supply as well as satisfy diesel demands at each city. This model conducted a case study satisfying 10% diesel demand in the Republic of Korea. The overall cost of the stochastic model (US$ 12.9/gallon·y) is slightly higher (23%) than that of the deterministic model (US$ 10.5/gallon·y). Fluctuations in CO₂ supply (stochastic model) had a significant impact on the optimal strategies of the biodiesel supply network.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.