• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.156-162
• /
• 2001

Novel pressure sensor using the resonance wavelength shift of single mode fiber-to-planar waveguide coupler, was demonstrated. It is found that the resonance wavelength shift due to refractive index variation of polymers by pressure occurs and its sensitivity depends on materials. We adopted symmetric structure of planar waveguide and remove the polarization dependence which is inevitable with side-polished fiber. AZ4562, AZl512 and THB-30 are used as planar waveguide materials and the resonance wavelength shifting by pressure was shown -0.008um/bar, 0.033nm/bar and 0.16nm/bar, respectively.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.365-373
• /
• 1997

Chitosan oligomer having aldehyde group at reducing end was prepared by oxidative-deamination reaction of chitosan by using sodium nitrite, and the resulting aldehyde group was redeced to 2,5-anhydro-D-mannitol group. The obtained chitosan oligomer showed an average degree of polymerization(DP) 2 by GPC analysis. It was highly soluble in lipophilic solvents. N,N-diacyl, O-acyl chitosan oligomer was obtained trom the reaction between chitosan oligomer and acyl chloride under 4-dimethoxyaminopyridine catalyst. From DSC measurement, N,N-dilauroyl, O-lauroyl chitosan oligomer showed mesophase region, which was confirmed by polarizing microscope as thermotropic liquid crystalline state. X-ray diffraction pattern revealed that N,N-dilauroyl, O-lauroyl chitosan oligomer was highly crystalline, whereas chitosan oligomer was not.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.306-311
• /
• 2013

A series of liquid crystalline polyesters containing the 4-chloro benzoate group on the hydroquinone unit of rigid group were synthesized through solution polymerization of 2,5-di(4-chlorobenzoate)hydroquinones and 4,4'-dicarboxy-${\alpha},{\omega}$-diphenoxy alkane. The structure and properties for synthesized polymers were investigated by $^1H$-NMR, FT-IR, DSC, TGA, and POM. As result of investigations, The presence of the methylene group and bulky lateral groups in polymer chain have a great influence on the properties of polymers such as solubilities and thermal transitions. The optical textures of polymers revealed a weak birefringence in the melt and indicated that they form nematic mesophase. All polymers have very narrow mesophase temperature ranges.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.142-147
• /
• 1995

Soliton pulse outputs are generated with figure '8' type erbium-doped fiber laser mode-locked by using a fiber loop mirror. The fiber loop mirror consists of an erbium-doped fiber amplifier at the one end of the loop, and 504 m-long dispersion-shifted fiber as a nonlinear medium. By pumping with a $1.48{\mu}m$ wavelength laser diode and adjusting the polarization controllers inside the loop, soliton pulses are generated with 1574 nm center wavelength and 1.2 nm linewidth. The soliton pulses are found randomly spaced within the fundamental period corresponding to cavity round trip time. The autocorrelation trace shows that the pulse width is 2.4 ps, which is in good agreement with the theoretical prediction. The pulsewidth- bandwidth product is found to be 0.348 which means that the pulses are nearly transform-limited.imited.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.229.2-229.2
• /
• 2012

지금까지 해외의 여러 달 궤도선에서 달의 영상을 다양한 방법으로 관측한 것에서 알 수 있듯이 영상 관측은 달 탐사에서 중요한 부분이다. 특히 그 중에서 입체 영사기(Stereo Imager)는 달의 3차원적 영상을 관측하여 달 표면의 구조를 파악할 수 있고 분광 카메라(Hyperspectral Camera)는 달 표면을 이루고 있는 물질을 분광 정보를 통해서 알아낼 수 있다. 본 연구에서는 우리나라가 2020년경 독자적인 달 궤도선을 계획하고 있는 것에 발맞추어 이 두 관측 장비를 설계해 보았다. 본 연구에서 설계한 탑재체는 하나의 광학계를 이용해 가시광 영역에서 동시에 입체 영상과 분광 영상을 얻을 수 있는 장치이며, 달 표면에서의 궤도선의 속도와 저장 가능한 정보의 양을 고려하여 100 km의 고도에서 속도를 1.6 km/s로 가정할 때 interline CCD가 17.5 m의 공간 분해능을 갖기 위해 92 frame/s 이상의 frame rate로 관측을 수행할 수 있게 하였다. 특히 분광 카메라는 wedge filter를 사용하여 광학계의 부담을 줄였으며 검출기로는 interline CCD를 사용하여 channel 수를 조절할 수 있도록 하였다. 또한 달 표면을 구성하는 입자의 크기에 대한 정보를 얻을 수 있는 편광판도 설치 하였다. 시험 모델의 문제점을 분석하여 새롭게 개선된 탑재체를 설계하여 개발하였다. 렌즈를 수정해 vignetting과 왜곡 현상을 보정하였고 전체 무게를 1.5 kg으로 줄여서 시험 모델보다 30% 이상 줄일 수 있었다. 파장 분해능은 20nm로 시험모델보다 더 개선된 분해능을 얻을 수 있었다. 출력 효율의 증대를 위해 power board의 수정을 수행하였다.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2012

We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.205-210
• /
• 2000

Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.566-573
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The proposed BSF consists of inner core, outer core, center dip and cladding. The proposed BSF is also very sensitive to mechanical perturbation, such as bending and pressure, making the light propagating in the BSF easily controlled and attenuated. The fabricated fiber-type variable optical attenuator using the proposed BSF (VOAFB) consisted of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The variable optical attenuator using the proposed BSF (VOAFB) was able to attenuate the optical power by more than about -38㏈ with the gradient -88.4［㏈$.$$cm^{-1}$ /］ at (1540∼1560nm) based m adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. According to the experimental results when using the proposed VOAFB, the optical power was easily controlled by adjusting mechanical pressure and produced an insertion loss of 0.68㏈, polarization loss of 0.5㏈, and return loss of less than -60㏈.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.698-705
• /
• 2015

Two series of symmetric dimesogenic compounds containing a butylene or 1-methylbutylene spacer as a flexible group were synthesized. The mesogenic groups of synthesized compounds consist of an azobenzene group with a terminal substituent. Chemical structures as well as, thermal, mesomorphic, and photochemical properties of the synthesized compounds were investigated using FT-IR, $^1H-NMR$, differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and UV-visible spectrometry. P-H, P-F, and $P-OC_6H_{13}$ showed monotropic liquid crystal phases, whereas the others showed enantiotropic liquid crystal phases. Compounds with butylene group as a flexible spacer exhibited wider mesophase temperature ranges and higher thermal transition temperatures than compounds containing a 1-methylbutylene group. Compounds with a high absolute value of the Hammett substituent constant exhibited high thermal transition temperatures and improved stability in the liquid crystal phase. Furthermore, in the absence or presence of UV light illumination, terminal substituents of the azomesogenic group were important factors in deciding the maximum absorbance wavelength (${\lambda}_{max}$) and the rate of photoisomerization (K).

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.224-230
• /
• 2013

Laser Lift-Off (LLO) is a process that removes a GaN or AIN thin layer from a sapphire wafer to manufacture vertical-type LEDs. It consists of a light source, an attenuator, a mask, a projection lens and a beam homogenizer. In this paper, we design an attenuator and a projection lens. We use the 'ZEMAX' optical design software for analysis of depth of focus and for a projection lens design which makes $7{\times}7mm^2$ beam size by projecting a beam on a wafer. Using the 'LightTools' lighting design software, we analyze the size and uniformity of the beam projected by the projection lens on the wafer. The performance analysis found that the size of the square-shaped beam is $6.97{\times}6.96mm^2$, with 91.8 % uniformity and ${\pm}30{\mu}m$ focus depth. In addition, this study performs dielectric coating using the 'Essential Macleod' to increase the transmittance of an attenuator. As a result, for 23 layers of thin films, the transmittance total has 10-96% at angle of incidence $45-60^{\circ}$ in S-polarization.