• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.135-143
• /
• 2008

According to the present highway design criteria, there are minimum standards which re ade from special design speeds. If some highways are satisfied the standards, it regards he highway as safety. In reality, however, most drivers drive a car at different speed compared with design speed. It is very dangerous for drivers especially at transition sections between curve and horizontal curve sections. Hence, this study calculated the rate of changing and horizontal acceleration at each section. Moreover, this study evaluated thesafety of design at curve transition sections and then calculated lateral acceleration and curve radii. This study found the minimum standards which are using as basic safety standards are not appropriate for measuring driver's safety.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.283-289
• /
• 2014

Personal rapid transit(PRT) systems have been highlighted in future transportation developments as a result of their potential as sustainable and eco-friendly transport solutions that provide demand-responsive mobility services. One of the most important characteristics of the personal rapid transit system(PRT) is that it can be constructed and operated at a low cost. A fundamental study on the alignment of the PRT guideway considering running stability was conducted in the present study. In addition, a parameter analysis of the major alignment design variables such as curve radius, transition curve length and cant was performed by vehicle dynamic analysis and optimum guideway alignments were proposed. The analysis results suggested that the theoretical values were satisfied and also confirmed the possibility of reducing the standard.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2010

The road safety depend on many road factors like vertical alignment, horizontal alignment and road cross section angle. These data are hardly to get with drawings, and the real data are differ from drawings because of road pavement overlay, etc. To get these data, so many time and cost are needed, moreover it is dangerous work in heavy traffic road. In this study we obtained the road safety data with RoSSAV(Road Safety Survey & Analysis Vehicle) of Korea Institute of Construction Technology in accordance with traffic flow, and make analysis of road safety with the vertical alignment, horizontal alignment and road cross section angle data. We derived the safety improvement method in Young-dong accident prone spot and described detail method in this paper.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.111-122
• /
• 2012

There has been a strong demand for providing diverse services to drivers utilizing existing ITS infrastructure. To this end, this study is aiming at improving the accuracy of a variable speed limit system by determining recommended speeds for the system utilizing the information from Urban Traffic Information System(UTIS) and Weather Information System(WIS). In order to determine appropriate speed limits under inclement weather conditions for the variable speed limit system, this study examined three methods: i) the method utilizing the information from WIS, ii) the method utilizing the information from UTIS, and iii) the method which combines the information from WIS and UTIS using different weights for diverse weather conditions. Finally, this study selected the third method which determines an appropriate speed limit using the relationship between the vehicle operating speed and the minimum stopping distance which is estimated using the existing speed limit, surface coefficient of friction and superelevation.

• Journal of Korean Medical classics
• /
• v.18 no.1 s.28
• /
• pp.57-66
• /
• 2005

통과대(通過對)${\ulcorner}$황제내경(黃帝內經)${\lrcorner}$ 중제출적여불면상관적17편경문적고찰(中提出的與不眠相關的17篇經文的考察), 진행불면원인적연구(進行不眠原因的硏究), 득출여하결논(得出如何結論): 수면화불면(睡眠和不眠), 여인체내위기적활동유관(與人體內衛氣的活動有關). 즉백주위기행어양분(卽白晝衛氣行於陽分), 고능소성(故能蘇醒); 이야만위기행어음분(而夜晩衛氣行於陰分), 칙능입수(則能入睡). 위기능구순리지출입내외, 기력양시유오장적정기제공적(其力量是由五臟的精氣提供的). 인차개괄이언(因此槪括而言), 불면적원인시음허양왕적상태(不眠的原因是陰虛陽旺的狀態). 수연불면불과시일종병증(雖然不眠不過是一種病症), 단기원인시다양적(但其原因是多樣的). 재경문중소견적원인(在經文中所見的原因), 진행개괄여하(進行槪括如下): 양기원성(陽氣元盛), 양명경실조(陽明經失調), 위중불화(胃中不和), 오장수손상(五臟受損傷), 혹인년노오장정기불족(或因年老五臟精氣不足), 인광증혹혼백비양이(因狂症或魂魄飛揚而) 치적다몽등심리장애(致的多夢等心理障碍), 비생리성수사체류(非生理性水邪滯留), 인침자오치이치적음정손상혹수사조장(因針刺誤治而致的陰精損傷或水邪助長).

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.125-131
• /
• 2011

This research aims to investigate the cause of the occurrence of a weak road drainage section scientifically and specifically through a site survey for a poorly drained section occurring due to rainfalls during road operation. This paper deeply reviewed the existing research results and current situation data on the poorly drained sections accumulated in Korea Expressway Corporation in order to investigate the cause of the occurrence of a weak road drainage section, and deeply verified and analyzed the weak sections for the road surface drainage facilities and the other road drainage facilities by visiting the expressway controlled by the 6 local headquarters and 33 branches of Korea Expressway Corporation. As a result of site surveys for the weak road drainage sections, i) in a road surface section, occurrence of ponding in the road shoulder pavement due to slope changes, bad collection of water in the collecting well at a median strip, shortage of road shoulder dike height, and inferior construction, etc. was analyzed to be the main cause of the occurrence of poorly drained sections, and ii) in a road neighborhood section, the occurrence of pavement height difference in a main road and shoulder section due to inferior ditches on a slope and the bad drain age at the inlet and outlet of a culvert due to soil deposits, debris, etc. were analyzed to be the main cause of the occurrence of weak sections. Proposed as a plan to improve the poorly drainage section of road were i)calculation of capacity through material changes at the ditch, enhancement of vertical sections and hydraulic analysis in terms of construction and other aspects, ii)derivation of a combined slope considering a slope and a vertical linearity and maintenance of proper distance between drainage structures in a vertical concave section in terms of geometrical structure, and iii)calculation of the drainage facility installation interval using a minutely rainfall intensity formula and a non-uniform flow analysis technique in terms of hydraulics and hydrologics and prompt removal of rainfalls from the road surface according to a linear drainage method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.417-426
• /
• 2015

The representative design elements of the road geometric structure are longitudinal slope, horizontal curve radius, super elevation, and transition curve. According to the function of a road, the design standards of these elements is applied by diverse combinations of them. This study divided expressway into homogeneous segments based on longitudinal slope and horizontal curve radius. And then, data required for analysis were matched to each segment, and the safety performance function was built by using the established data. crash modification factors which can explain traffic accident exposure rate were calculated. When the threshold value of horizontal curve radius R=1,000 m was set to 1.0, the crash modification factors at R=300 m was calculated as 1.33, which means that the accident exposure rate is increased by 33%. When the threshold value of the longitudinal slope 0% was set to 1.0, the crash modification factors demonstrated that the accident exposure rate decreases on the upward slope and the accident exposure rate increases on the downward slope. The results of this study can be used as basic information in the design of expressway geometries during the improvement or the construction of expressways.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.51-62
• /
• 2000

The objective of this study was to reevaluate current Korean design values for lane width widenings on horizontal currie sections and to develop a new method for derivation of design values based on low-speed offtracking. For this purpose, earlier research were reviewed and necessary equations were derived. Also, the method for derivation of widening values of Korea was compared with that for other countries. The result showed that present Korean method could not consider the variation of lane widths and design speeds of roads. In this Paper, to solve such problems, the new concept of widening was developed. That is the current concept of widening which concerns only the dimension of vehicles and radius of curves was replaced by a new concept that lane width widenings on horizontal curve sections is the difference between the width required on curries and tangents. The width required on a curve consists of the swept Path of a vehicle, lateral clearance, and additional allowance. The width of a tangent is calculated by multiplying lane width by the number of lanes The result of applying new concept shows that the values derived from new concept are higher than current design values for curries have same radius. This study was based only on low-speed offtracking. Therefor, it is recommended that further studies which consider the superelevation and high-speed effect on offtracking be made to derive more accurate widening values .

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.