• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.743-746
• /
• 2013

Most of existing simulator for wireless sensor networks (WSNs) models the battery-based sensor and provides the MAC and routing protocols designed for the battery-based WSNs. Recently, however, as the energy harvesting sensor systems are studied widely, the require of the simulator for them is getting increased; but the related work is insignificant. Unlike the existing simulators, the simulator for the energy-harvesting WSNs requires the new energy model which is integrated with the energy-harvesting model, rechargeable battery model and energy-consuming model. Additionally, it should provide the well-known MAC and routing protocols designed for the energy-harvesting WSNs, and also provide the user-friendly interface for the convenient usage. In this work, we analysis the existing Castalia simulator and revise it for the user-friendly simulator for the solar energy harvesting WSNs.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.267-280
• /
• 2005

In this paper, we implement and verify XMIP integrating IETF Mobile IP and the Explicit Multicast mechanism for a great number of small group multicast communications. U a source node sends Xcast packets explicitly inserting destination nodes into the headers, each Xcast router decides routes and forwards the packets toward each destination node based on unicast routing table without the support of multicast trees. n is a straightforward and simple multicast mechanism just based on a unicast routing table without maintaining multicast states because of the inheritance from the Explicit Multicast mechanism. This research modifies and extends the functionality of IETF Mobile IP's mobility agents, such as HA/FA to HA+/FA+ respectively, considering interworking with Xcast networks. Xcast packets captured by HA+ are forwarded into X-in-X tunnel interfaces for each FA+ referred to the binding table of HA.. This X-in-X tunneling mechanism can effectively solve the traffic concentration problem of IETF Mobile IP multicast services. Finally WLAN-based testbed is built and a multi-user Instant messenger system is developed as a Xcast application for finally verify the feasibility of the implemented XMIP/Xcast protocols.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.3
• /
• pp.55-70
• /
• 2016

The most critical research issue in MANET environment is on supporting reliable communication between various devices. Various Multi-Hop Routing Protocol studies have proceeded. However, some problems you might have found when you use the existing link state routing technique are that it increases Control Message Overhead and it is unstable when node moves in CR circumstance which has transformation of using channel and MIMC circumstance which uses a number of interfaces. This essay offers a technique which is based on On-Demand Hello and the other technique which used Broadcast Interface of optimization as a solution to decrease Control Message Overhead. Also it proposes Quick Route Restoration technique which is utilized by GPS and MPR Selection technique which consider mobility as a solution of stable communication when node moves. Those offered Routing Protocol and OPNET based simulator result will be expected to be an excellent comparison in related research fields.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.171-178
• /
• 2007

In mobile ad hoc networks, an application scenario requires mostly group mobility behavior in the mix of group moving nodes and individually moving nodes. The nodes of those applications tend to belong to the movement group with similar movement behavior. Group mobility is one of the good methods to improve scalability, and reduces the protocol overhead. In this paper, we propose the multicast architecture which regards nodes that have equal group mobility in the heterogeneous group mobility network as the single entity with the multiple interfaces and composes multicast tree, The logical cooperative entity-based multicast architecture accommodates the scalability, the multicast tree simplification, and the protocol overhead reduction which arc obtained from the hierarchical multicast architecture, while it maintains the nat multicast architecture for the data transmission. It also prevents the concentration of the energy consumption dispersing data forwarding load into the several ingress/egress nodes. Results obtained through simulations show that logical cooperative entity based multicast protocol with multiple interfaces offers the protocol scalability and the efficient data transmission.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.227-234
• /
• 2002

MPLS which integrates routing of layer 3 and switching of layer 2, enables support for fast forwarding, traffic engineering and virtual private network services. GSMP is open interface protocol between a label switch and a controller, and it provides connection, configuration, event, performance management and synchronization. In the GSMP open interface, the functions of network management can be located either in the controller or in the label switch. To simplify the label switch and enhance the efficiency of resources, we adopt the network management model, in which the SNMP agent is located in the controller and is interworked with the GSMP. We presented the interworking scenrios between the GSMP and the network management of MPLS. We implemented the controller to verify the realization of our adopted network management model, and measured the connection setup delay of the provisioned connection.

• Information and Communications Magazine
• /
• v.18 no.11
• /
• pp.82-95
• /
• 2001

OXC는 정적인 점대점 광전송망에서 동적인 그물형 전광통신망으로 진화하기 위하여 망에 도입되어야 할 새로운 광네트워크 장비이다. OXC는 링크 단위의 스위칭을 하는 FXC 파장 단위의 스위칭 기능이 있으나 파장 변환 기능이 없는 WSXC, 그리고 파장 변환 기능이 있는 WIXC로 구분할 수 있으며, 이들간의 hybrid 도 가능하다. OXC 하드웨어의 중심을 이루는 것은 광스위치이다. MEMS 기술, 열광학 효과를 이용한 광도파로 기술, 전반사를 이용하는 bubble 스위치 기술 등을 사용하여 개발이 진행되고 있다. 현재까지는 이 중 3D MEMS 기술이 대용량 스위치를 구성할 가능성이 있는 기술로 받아들여지고 있다. OXC를 구성하는데 있어서 또 다른 핵심적인 기술에는 파장변환 기술이 있다. 광전 파장변환기와 전광 파장변환기 방식이 현재 연구되고 있으며 초기에는 광전변환 방식이 OXC 시스템에 적용될 가능성이 높다. 전광 파장변환기의 시스템 적용을 위해서는 좀 더 많은 연구가 필요할 것으로 보인다. OXC를 사용하는 전광통신망에서 광스위치 기술 이상으로 많은 논란이 되는 것은 망의 운용 문제이다. 현재 가장 많이 언급되는 모델은 오버레이 모델과 피어 모델이다. 오버레이 모델은 클라이언트/서버 개념에 기반한 모델인 반면 피어 모델은 광 네트워크 장비와 기존 장비를 대등한 관계로 정의한 모델이다. 각각의 모델에 대해서는 표준화 단체에 따라 약간씩 다른 입장을 취하고 있지만 상호 간에 수용 또는 타협할 점이 많다고 볼 수 있다. OXC를 포함하는 전광 통신망을 운용할 때에는 동적 연결 설정 및 해제를 위한 새로운 신호 방식이 필요하다. 이를 위하여 ITU-T 및 OIF에서 UNI와 NNI등의 인터페이스와 여기에 사용되는 신호 방식을 논의하고 있다. 그 외에도 전광 통신망 운용에 필요한 라우팅 및 파장할당 방법과 OXC를 이용한 그물형 망에서의 보호 및 복구에 대한 연구도 활발히 진행되고 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.394-397
• /
• 2003

In this paper, we describe the implementation of high performance buffer manager that is used in an advanced input-queued switch fabric. The designed buffer manager provides wire-speed cell/packet routing with low cost and tolerates the transmission pipeline latency of request and grant data. The buffer manager is implemented in a FPGA chip and supports the speed of OC-48c, 2.5Gbps per port.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.309-315
• /
• 2009

Wireless Ad-hoc networks are dynamic networks that consist of mobile nodes. Nodes in Ad-hoc networks are usually laptops, PDAs or mobile phones. These devices feature Bluetooth and/or IEEE 802.11 (WiFi) network interfaces and communicate in a decentralized manner. Due to characteristics of Ad-hoc networks, Mobility is a key feature of routing protocol design. In this paper, we present an enhanced routing maintenance scheme that cope with topology changes pre-actively. The key feature of the proposed scheme is to switch next-hop node to alternative neighbor node before link breakage for preventing route failure. From extensive experiments by using NS2, the performance of the proposed scheme has been improved by comparison to AODV protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.347-357
• /
• 2004

Network systems have been developed to meet the high performance of forwarding packets and flexibility for providing various services, so network processor emerged. In order to improve the performance of network processors, fast external interface and special functional units have been used. Recently as an architectural method of improving performance, the SMT(Simultaneous Multi Threading) architecture is proposed, but this architecture is difficult to implement due to its complexity. Therefore research for architectural optimization is needed to develop the SMT network processors. In this paper we analyze each functional units on performing network algorithms and propose an optimized SMT network Processor architecture.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.669-672
• /
• 2011

최근 IT(Information Technology)와 타(他)산업 간의 융 복합이 촉진되면서 새로운 융합서비스로 사물지능 통신(M2M, Machine to Machine)이 차세대 지능형 인프라 기반의 핵심 서비스로 부각되고 있다. 사물지능 통신은 기존의 통신 인프라를 활용하여 사물정보의 수집, 가공, 처리를 통해 최종 서비스를 제공하는 기술 분야로 PHY, MAC, 라우팅에 대한 기술 이슈보다는 서비스 관점에서의 네트워크 아키텍처 정의와 기능, 서비스 플랫폼 간의 연동, M2M 단말과 네트워크 간의 인터페이스에 대한 연구가 진행 중이다. 본 논문에서는 사물지능통신 융합서비스를 사용자에게 보다 편리하게 제공하기 위한 기존 플랫폼 간의 연동을 위한 요구사항과 방안을 제안한다.