• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.1
• /
• pp.8-14
• /
• 2016

This article presents a study on the tensile properties of hypoeutectoid steels with different ferrite-pearlite microstructures. Nine kinds of hypoeutectoid steel specimens were fabricated by varying carbon content and isothermal transformation temperature. The microstructural factors such as ferrite & pearlite fraction, interlamellar spacing, and cementite thickness were quantitatively measured and then tensile tests were carried out on the specimens in order to investigate the correlation of the microstructural factors with strength and ductility. The pearlite volume fraction usually increased with decreasing transformation temperature, while the pearlite interlamellar spacing and cementite thickness decreased mostly with decreasing transformation temperature, irrespective of carbon content. The tensile test results showed that the yield and tensile strengths of all the steel specimens increased and their ductility was also improved as the transformation temperature decreased. For the steel specimens investigated, the difference in the transformation temperature dependence of strength and ductility could be explained by the fact that the variation in pearlite fraction with transformation temperature noticeably affected various microstructural factors such as pearlite interlamellar spacing and cementite thickness associated with pearlite fracture mechanism such as void initiation, cementite necking, and cracking.

• Korean Journal of Materials Research
• /
• v.28 no.10
• /
• pp.570-577
• /
• 2018

This study examines the effect of microstructural factors on the strength and deformability of ferrite-pearlite steels. Six kinds of ferrite-pearlite steel specimens are fabricated with the addition of different amounst of Mn and V and with varying the isothermal transformation temperature. The Mn steel specimen with a highest Mn content has the highest pearlite volume fraction because Mn addition inhibits the formation of ferrite. The V steel specimen with a highest V content has the finest ferrite grain size and lowest pearlite volume fraction because a large amount of ferrite forms in fine austenite grain boundaries that are generated by the pinning effect of many VC precipitates. On the other hand, the room-temperature tensile test results show that the V steel specimen has a longer yield point elongation than other specimens due to the highest ferrite volume fraction. The V specimen has the highest yield strength because of a larger amount of VC precipitates and grain refinement strengthening, while the Mn specimen has the highest tensile strength because the highest pearlite volume fraction largely enhances work hardening. Furthermore, the tensile strength increases with a higher transformation temperature because increasing the precipitate fraction with a higher transformation temperature improves work hardening. The results reveal that an increasing transformation temperature decreases the yield ratio. Meanwhile, the yield ratio decreases with an increasing ferrite grain size because ferrite grain size refinement largely increases the yield strength. However, the uniform elongation shows no significant changes of the microstructural factors.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.583-589
• /
• 2015

This paper presents a study on the room- and low-temperature impact toughness of hypoeutectoid steels with ferrite-pearlite structures. Six kinds of hypoeutectoid steel specimens were fabricated by varying the carbon content and austenitizing temperature to investigate the effect of microstructural factors such as pearlite volume fraction, interlamellar spacing, and cementite thickness on the impact toughness. The pearlite volume fraction usually increased with increasing carbon content and austenitizing temperature, while the pearlite interlamellar spacing and cementite thickness mostly decreased with increasing carbon content and austenitizing temperature. The 30C steel with medium pearlite volume fraction and higher manganese content, on the other hand, even though it had a higher volume fraction of pearlite than did the 20C steel, showed a better low-temperature toughness due to its having the lowest ductile-brittle transition temperature. This is because various microstructural factors in addition to the pearlite volume fraction largely affect the ductile-brittle transition temperature and low-temperature toughness of hypoeutectoid steels with ferrite-pearlite structure. In order to improve the room- and low-temperature impact toughness of hypoeutectoid steels with different ferrite-pearlite structures, therefore, more systematic studies are required to understand the effects of various microstructural factors on impact toughness, with a viewpoint of ductile-brittle transition temperature.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.184-191
• /
• 2017

This present study deals with the effect of micro-alloying elements and transformation temperature on the correlation of microstructure and tensile properties of low-carbon steels with ferrite-pearlite microstructure. Six kinds of low-carbon steel specimens were fabricated by adding micro-alloying elements of Nb, Ti and V, and by varying isothermal transformation temperature. Ferrite grain size of the specimens containing mirco-alloying elements was smaller than that of the Base specimens because of pinning effect by the precipitates of carbonitrides at austenite grain boundaries. The pearlite interlamellar spacing and cementite thickness decreased with decreasing transformation temperature, while the pearlite volume fraction was hardly affected by micro-alloying elements and transformation temperature. The room-temperature tensile test results showed that the yield strength increased mostly with decreasing ferrite grain size and elongation was slightly improved as the ferrite grain size and pearlite interlamellar spacing decreased. All the specimens exhibited a discontinuous yielding behavior and the yield point elongation of the Nb4 and TiNbV specimens containing micro-alloying elements was larger than that of the Base specimens, presumably due to repetitive pinning and release of dislocation by the fine precipitates of carbonitrides.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.49-54
• /
• 2015

Based on the results in this study, here we propose a systematic micropropagation process for 'Gisela 5' that is one of the important dwarfing cherry rootstocks. When the apical tips detached from newly developed shoot in spring season were cultured on the half strength MS media with 0.5 mg/L IBA and 0.5 ~ 1.0 mg/L BA, the cultures scored the highest acquisition rate at 90% for normal shoot with vigorous growth and without hyperhydricity. As next step, the young shoots maintained in vitro well multiplied on the full strength MS medium supplemented with 0.5 mg/L IBA and 0.5 mg/L BA, in which multiplication rate was approximately nine-fold. Given the half strength MS medium containing 2.0 mg/L IBA, each transplanted shoot further developed robust roots. Finally, the plantlets were easily acclimatized in the compost consisted of vermiculite, perlite, and peatmoss in the proportion of 1:1:1. We expect that the results are useful for cherry cultivation and its rootstock production.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.721-728
• /
• 2017

High-grade gray cast iron (HCI350) was prepared by adding Cr, Mo and Cu to the gray cast iron (GC300). Their microstructure, mechanical properties and fatigue strength were studied. Cast iron was made from round bar and plate-type castings, and was cut and polished to measure the percentage of each microstructure. The size of flake graphite decreased due to additives, while the structure of high density pearlite increased in volume percentage improving the tensile strength and fatigue strength. Based on the fatigue life data obtained from the fatigue test results, the probability - stress - life (P-S-N) curve was calculated using the 2-parameter Weibull distribution to which the maximum likelihood method was applied. The P-S-N curve showed that the fatigue strength of HCI350 was significantly improved and the dispersion of life data was lower than that of GC300. However, the fatigue life according to fatigue stress alleviation increased further. Data for reliability life design was presented by quantitatively showing the allowable stress value for the required life cycle number using the calculated P-S-N curve.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.279-285
• /
• 2023

In order to predict the mechanical properties of ductile cast iron heat treated in an intercritical temperature range, samples machined from cast iron with a tensile strength of 450 MPa were heat-treated at various intercritical temperatures and air-cooled, after which a microstructural analysis and Brinell hardness test were conducted. As the heat treatment temperature was increased in the intercritical temperature range, the ferrite fraction in the ductile cast iron decreased and the pearlite fraction increased, whereas the nodularity and nodule count did not change considerably from the corresponding values in the as-cast condition. The Brinell hardness values of the heat-treated ductile cast iron increased gradually as the heat treatment temperature was increased. Based on the measured alloy composition, the fraction of each stable phase and the hardness model from the literature, the hardness of the ductile cast iron heat treated in the intercritical temperature range was calculated, showing values very similar to the measured hardness data. In order to check whether it is possible to predict the hardness of heat-treated ductile cast iron by using the phase fraction obtained from thermodynamic calculations, the volumes of graphite, ferrite, and austenite in the alloy were calculated for each temperature condition. Those volume fractions were then converted into areas of each phase for hardness prediction of the heat-treated ductile cast iron. The hardness values of the cast iron samples based on thermodynamic calculations and on the hardness prediction model were similar within an error range up to 27 compared to the measured hardness data.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.57-57
• /
• 2019

본 연구는 관상 및 조경용으로 개발이 가능한 남방계 양치식물인 점고사리[Hypolepis punctata (Thunb.) Mett.]의 전엽체 증식 및 포자체 형성에 적합한 배양조건을 구명하고자 수행되었다. 무가온 온실에서 성숙한 포자엽을 채집한 후 포자를 기내에서 발아시켜 전엽체를 획득하였으며, 8주 간격으로 계대배양 하여 실험의 재료로 사용하였다. 배지종류에 따른 전엽체의 증식 및 형태형성을 확인하고자, 배양된 전엽체 0.3g을 메스로 잘게 다진 후, 농도를 1/4, 1/2, 1, 2배로 조절한 MS배지에 8주간 배양하였다. 이후 선발된 배지를 기준으로 sucrose, 활성탄, 질소급원의 농도를 조절하여 전엽체의 증식과 형태형성을 확인하였다. 그 결과, 1MS배지에서 전엽체의 생체중이 초기 접종량인 0.3g에 비해 10.7배 증가한 3.2g으로 가장 높은 증가율을 보였다. 형태관찰에서도 장정기의 형성이 관찰되었으며, 전엽체의 쿠션조직이 비교적 잘 발달하였다. 전엽체 증식에 가장 좋은 효과를 보인 1MS배지를 기준으로 sucrose의 농도를 0-4%로 달리하여 실험한 결과, 1%의 처리구에서 6.7g으로 가장 높은 생체중을 보였다. 활성탄의 농도를 0-0.8%로 첨가한 네 처리구 중에서는 0.8%의 처리구에서 14.2g으로 무처리구에 비해 생체중이 2배 이상 증가하였다. 전엽체의 형태 또한 정상적인 발달을 보였다. 질소급원의 비율을 30-120mM로 조절한 배지에서는 60mM의 처리구에서 4.9g으로 가장 높은 생체중을보였다. 이후 포자체 형성을 위한 최적의 토양조건을 구명하고자, 원예상토, 피트모스, 펄라이트 및 마사토의 비율을 달리하여 5종류의 배양토를 조성하였다. 혼합된 토양은 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진 하였으며, 배양된 전엽체 1g을 증류수와 함께 10초간 분쇄한 다음 준비된 토양표면에 분주하여 재배하였다. 12주간의 재배 결과, 원예상토를 단용한 토양에서 포자체의 수가 포트당 250.0개로 가장 많이 형성되었으며, 포자체의 생육 또한 다른 처리구에 비해 우수한 결과를 보였다. 한편 피트모스가 혼합된 토양에서는 포자체가 형성되지 않았다. 따라서 점고사리의 전엽체 대량증식에 적합한 배지는 sucrose 1%와 질소급원의 농도를 60mM, 활성탄을 0.8% 첨가한 1MS배지로 판단되며, 포자체 대량생산을 위해서는 원예상토를 단용한 토양이 적합하다고 판단된다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.105-119
• /
• 2003

일반적인 로봇시스템은 자신이 이동해야 할 목표 지점을 자율적으로 생성할 수 없으므로 어떤 다른 시스템의 정보를 이용하여 주변을 탐색하거나 장애물을 인식하고 식별하여 자신의 제어전략을 수립한다. 그러므로 본 논문에서 제시한 시스템은 초소형 비행체를 이용하여 주위 환경과 자율 이동로봇의 위치 정보를 탐색할 수 있도록 시스템을 구성하였다 이러한 시스템의 성능은 로봇이 위치하고 있는 주위의 불완전한 정보로부터 적절한 결론을 유도해 낼 수 있어야 한다. 그러한 비선형적인 문제는 현재까지도 문제 해결을 위해 많은 연구가 진행되고 있다. 본 연구에서는 자율이동로봇의 행동 환경을 공간상의 제약을 받지 않는 비선형 시스템인 초소형 비행체에 극초단파(UHF16채널) 영상장치를 이용하여 호스트 PC로 전송하고 호스트 PC는 로봇의 현재 위치, 이동해야 할 목표위치, 장애물의 위치와 형태 등을 분석한다. 분석된 결과 파라메타는 RF-Module을 이용해서 로봇에 전송하고, 로봇은 그 데이터를 분석하여 동작하게 된다. 로봇이 오동작 또는 장애물로 인해 정확한 목적지까지 도달하지 못할 때 호스트 PC는 새로운 최단경로를 생성하거나 장애물을 회피 할 새로운 전략을 로봇에게 보내준다. 본 연구에 적용한 알고리즘은 초소형 비행체에서 탐지한 불완전한 영상정보에서도 비교적 신뢰도 놀은 결과를 보이는 A* 알고리즘을 사용하였다 적용한 알고리즘은 실험을 통하여 실시간으로 정보를 처리할 수 있었으며, 자율 이동로봇의 충돌회피나 최단 경로 생성과 같은 문제를 실험을 통하여 그 성능과 타당성을 검토하였다.delta}textitH]$를 도출하였다.rc}C$에서 30 ㎫의 압력으로 1시간동안 행하였다 소결한 시편들은 직사각형 형태로 가공하였으며 표면은 0.5$\mu\textrm{m}$의 다이아몬드 입자로 연마하였다. XRD, SEM 및 TEM을 이용하여 상분석 및 미세조직관찰을 행하였다. 파괴강도는 3중점 굽힘 법으로 (3-point bending test) 측정하였다. 이때 시편 하부의 지지 점간의 거리는 30mm, cross-head 속도는 0.5 mm/min으로 하였고 5개의 시편을 측정하여 평균값을 구하였다.ell/\textrm{cm}^3$, 혼합재료 3은 0.123$\ell/\textrm{cm}^3$, 0.017$\ell/\textrm{cm}^3$, 혼합재료 4는 0.055$\ell/\textrm{cm}^3$, 0.016$\ell/\textrm{cm}^3$, 혼합재료 5는 0.031$\ell/\textrm{cm}^3$, 0.015$\ell/\textrm{cm}^3$, 혼합재료 6은 0.111$\ell/\textrm{cm}^3$, 0.020$\ell/\textrm{cm}^3$로 나타났다. 3. 단일재료의 악취흡착성능 실험결과 암모니아는 코코넛, 소나무수피, 왕겨에서 흡착능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 다른 재료에 비하여 상대적으로

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.50-56
• /
• 2010

This experiment was carried out to examine the effect of a silicate fertilizer on the growth and development of potted plants. Cutting of Kalanchoe blossfeldiana 'Kaluna' and 'Taos', and Dianthus caryophyllus L. 'Kazan' and 'Tula' were grown in 50 and 128-cell plug trays, respectively. Rooted cuttings transplanted to the mixture of a commercial medium and perlite (5:1, v/v) supplemented with a silicate fertilizer at 0, 40, 80, 120 or $160g{\cdot}L^{-1}$ medium was evaluated. A silicate fertilizer supplementation at $40g{\cdot}L^{-1}$ medium resulted in the greatest plant height, leaf thickness, and root fresh and dry weights in both kalanchoe and carnation. However, plant height was suppressed in the treatment of a silicate fertilizer supplementation at higher concentrations in both kalanchoe and carnation. According to the scanning electron microscope images of transversal sections of tissues of roots and leaves in kalanchoe and carnation, the treatment of a silicate fertilizer supplementation at $40g{\cdot}L^{-1}$ medium resulted in plants with more compact tissue than the control.