• 베이커리
• /
• no.3 s.368
• /
• pp.114-116
• /
• 1999

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.185-194
• /
• 2009

The autogenous shrinkage of high-performance concrete, including very-early strength latex-modified concrete(VES-LMC), is generally bigger than that of normal strength concrete because of the low water/cement ratio, high binder contents, and usage of superplasticizer. Mix. proportion of VES-LMC has low water/cement ratio(0.38), high cement content(390kg/m$^3$), and aid of latex(15% of cement weight). Thus, these factors of VES-LMC, rapid water self-dissipation and evaporation within 3 hours of concrete placement would increase the autogenous shrinkage. The purpose of this study was to evaluate the early-age shrinkage, thermal deformation and autogenous shrinkages of VES-LMC with retarder contents(retarder solids-cement ratio, by weight) using to secure working time in field. The experimental results showed that retarder contents do not affect of the maximum hydration temperature. Early-age expansion of VES-LMC was mostly caused by thermal expansion and partly by autogenous expansion. The autogenous shrinkage is decreased by increasing the retarder contents within this study. On the other hand, the usage of retarder should be decided carefully considering the field conditions because an excessive usage of retarder can cause handful early-age expansion.

• 대한관절경학회:학술대회논문집
• /
• 2007.10a
• /
• pp.66-74
• /
• 2007

1931년 Burman은 주관절의 제한된 관절 공간, 관절낭 팽창의 어려움, 삽입구 주변에 근접한 신경-혈관 구조물에 의해 주관절 관절경은 불가능하다고 보고하였다. 비록 1935년 자신이 다시 여러 번 시도 끝에 주관절 전방 관절낭을 관절경으로 관찰한 후 주관절도 관절경적 접근이 가능하다는 점을 처음으로 언급하였지만 1980년대 중반까지도 몇몇의 보고를 제외하고 주관절 관절경에 대한 관심은 매우 적었다. 그 후 주관절 관절경은 관절경 기구들의 발달과 소관절을 위한 소구경 관절경의 발전과 함께 하였다. 1985 Andrew와 Carson이 supine position에서 전외측, 전내측 그리고 후외측 삽입구를 이용하여 주관절을 관찰하였으며 1989년 Poehling은 후방 주관절 접근이 용이하도록 prone position으로 관절경을 시행하였고 최근 새로운 접근 방법 및 확대된 적응증에 대한 보고가 점점 늘어나고 있다. 주관절 관절경의 합병증은 적지만 주관절 주변의 해부학적 구조물에 대한 정확한 이해를 가지고 있어야 심각한 합병증을 발생을 예방할 수 있다.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.395-400
• /
• 2012

The stress-strain relationship of soil is dependent on a number of factors such as soil type, density, stress level and stress path. Th accurate stress-stain relationship can be predict using a constitutive model incorporated all influencing factors. In this study, an isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress paths were performed on Baekma river sand to investigate parameters characteristics of Lade's single work hardening model depending on the stress path.. Based on test results, the parameters of yield function (h, ${\alpha}$) are not much influenced by stress level and stress path, the these parameters do affect a little bit of stress-strain behavior. The parameters h and ${\alpha}$ are closely related to failure criterion ${\eta}_1$, they can be replaced by failure criterion parament. We also observed that predicted values from the Lade's single hardening constitutive model are well matched with the observed data.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.1
• /
• pp.49-53
• /
• 2002

Purpose : To document the change in the temperature of the knee joint at the initiation and conclusion of an arthroscopic procedure and correlate this temperature change with other intra-operative variables. Material and Methods : Temperature measurements were performed in 40 consecutive patients(42 cases) that underwent arthroscopic surgery. Temperature measurements were taken at the initiation of the procedure, before and after inflation of the tourniquet. The last measurement was recorded at the end of the surgical procedure. Results : The mean knee joint temperature evaluated before inflation of the torniquet was $35.1{\pm}1.0$, at the end of surgery, $24.6{\pm}1.5^{\circ}C$. The mean temperature change observed from the beginning to the end of the procedure was $10.5^{\circ}C$. The student t test showed a statistically significant difference of the initial joint temperature(p<0.01) between the patient with no and+1 effusion / between the patient with no and +2 effusion. The temperature at the end of the procedure was found to be statistically low correlated (p<0.01) with the lower temperature of the irrigant and the lengthening of the arthroscopic procedure. Conclusion : Consideration should be given to maintaining the saline irrigant to more physiologic temperature to protect the articular cartilage from any possible temperature induced damages.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.566-568
• /
• 1999

현재는 데이터 통신망이 음성 통신망을 흡수하는 단계이다. 데이터 망이 기존의 음성 망이 가지는 영역을 포함하면서 광범위하게 활용되면서 앞으로 그 범위는 더욱 넓어질 것이다. 현재 급속히 팽창하고 있는 인터넷도 데이터 통신망이 진일보 하는데 커다란 역할을 하고 있다. 기존의 연결 지향형 방식의 패킷 통신과 달리 인터넷이 주로 비연결형 방식의 IP를 사용하기 때문에 새로운 개념의 데이터 전송이 요구되고 있다. 이러한 요구들로 인해 ATM, Gigabit Router, MPLS 등이 출현하게 되었고 현재는 MPLS가 가장 적합한 해결책으로 제시되고 있다. IETF 역시 이러한 MLS에 대한 표준안을 준비하고 있다. 이곳에서는 많은 장점을 가지는 MPLS(MultiProtocol Label Switch)망에서의 명령어 그리고 타이머를 가지는 레이블 예약방식의 경로 재설정 알고리즘을 제시한다. 방법은 경로 재설정시간을 단축하고 트래픽의 적절한 분배를 통하여 네트워크의 부하를 줄인다.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.160-167
• /
• 2007

This paper proposes a model for the solutions predicting the coefficient of thermal expansion of composites including fiber-like shaped$(a_1>a_2=a_3)$ and disk-like shaped$(a_1=a_2>a_3)$ inclusions like two dimensional geometries, which was analyzed by one axis and a single aspect ratio, $(\rho_\alpha=a_1/a_3)$. The analysis follows the procedure developed for elastic moduli by using the Lee and Paul's approach. The effects of the aspect ratio on the coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The longitudinal coefficients of thermal expansion $\alpha_{11}$ decrease and approach the coefficient of thermal expansion of filler, as the aspect ratios increase. However, the transverse coefficients of thermal expansion $\alpha_{33}$ increase or decrease with the aspect ratios.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1025-1026
• /
• 2012

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.368-375
• /
• 2014

The Ground Based Augmentation System (GBAS) is influenced by environmental factors, making analysis in the installation region important. This study has proposed the sigma inflation of the B-value considering the satellite elevation angle and analyzed the Vertical Protection Level (VPL) of the H1 hypothesis. After collecting data that meet the environmental conditions of the installation region, sigma expansion coefficients by the unit of satellite elevation angle ($5^{\circ}$) have been estimated. The obtained results were functionalized through curve-fitting, and sigma inflation customized for the environmental conditions of the test region was proposed. Then, the characteristics were classified and analyzed depending on humidity and solar activities. According to the sigma inflation with respect to elevation angle analysis, changes in the size of sigma inflation factors by the difference of humidity were minor. However, the VPL under the satellite elevation angle-based sigma inflation met integrity. Also, considering the sigma inflation factor with respect to elevation angle, compared to existing methods, high-integrity and improved availability is confirmed by removing unnecessary margins in high elevation angle satellite.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.206-214
• /
• 2007

The theoretical study is developed for predicting the thermal expansion changes of composites which include complex inclusion, which is used three-dimensional ellipsoid model ($a_1>a_2>a_3$), which has two aspect ratios (the primary aspect ratio, $\rho_{\alpha}=a_1/a_3$ and the secondary aspect ratio, $\rho_{\beta}=a_1/a_2$). We can predict the feature of general thermal expansion factors by theoretical approach of matrix with aligned ellipsoidal inclusion using the Eshelby's equivalent tensor. The coefficients of longitudinal linear thermal expansion ${\alpha}_{11}$ decrease to those of inclusions, ${\alpha}_f$, as both aspect ratios increase. The coefficients of transverse linear thermal expansion of composites ${\alpha}_{33}$ initially increase and show the parabolic corves with maximum values, as the concentrations of filler increase. The coefficient of thermal expansion, ${\alpha}_{22}$ in the transverse direction decreases, as $\rho_{\alpha}$ increases, however, ${\alpha}_{22}$ increases as $\rho_{\beta}$ increases. The coefficient of linear thermal expansion of composites, ${\alpha}_{33}$ in the normal direction increases, as $\rho_{\alpha}$ increases, while ${\alpha}_{33}$ decreases as $\rho_{\beta}$ increases.