• Title/Summary/Keyword: 팽창

Search Result 3,298, Processing Time 0.024 seconds

Optimization of Design Pressure Ratio of Positive Displacement Expander for Engine Waste Heat Recovery of Vehicle (자동차 엔진 폐열 회수 동력시스템에서 용적형 팽창기의 설계 팽창비 최적화)

  • Kim, Young Min;Shin, Dong Gil;Kim, Chang Gi;Woo, Se Jong;Choi, Byung Chul
    • Journal of Energy Engineering
    • /
    • v.21 no.4
    • /
    • pp.411-418
    • /
    • 2012
  • The effect of built-in volume ratio of expander on the performance of a two-loop Rankine cycle system for engine waste heat recovery of vehicle has been investigated. In the case of positive displacement expander in the various operating condition of the vehicle, it can operate in both under-expansion and over-expansion conditions. Therefore, the analysis of off-design performance for the expander is very important. Furthermore, the volume and weight of the expander as well as the efficiency must be considered in the optimization of the expander. This study shows that the built-in volume ratio of expander causing under-expansion at a target condition is more desirable considering the off-design performance and size of the expander, based on the simple modeling of off-design operation of the expander.

Study on Reaction Rate of the Non-Explosive Demolition Agent (비폭성 파쇄재의 반응률 특성에 관한 연구)

  • ;Huipeng Ba
    • Tunnel and Underground Space
    • /
    • v.4 no.2
    • /
    • pp.87-91
    • /
    • 1994
  • 팽창재와 같은 비촉성 파쇄재는 화약발파와 비교하여 볼 때 진동을 유발하지 않는다는 면에서 인접한 구조물에 영향을 주지 않고 암반을 파괴할 수 있는 장점을 갖고 있다. 비폭성 파괴방법으로 유압식 암석분할기도 팽창재와 유사한 적용성을 갖고 있으나 힘을 작용시킬수 있는 천공깊이에 제약을 갖고 있으며 규모가 큰 암반의 파괴 방법으로는 적용한계가 있다. 반면에 팽창재는 천공깊이에 큰 제약을 받지 않으며 천공수에 제한을 받지 않는다는 장점이 있다. 그러나 팽창재의 현장적용시 가장 큰 단점의 하나로 지적되고 있는 것은 파괴력을 나타내기까지의 시간이 오래 걸림으로 작업능률에 문제가 있다는 것이다. 반응시간은 물과 팽창재와의 반응률과 밀접한 관계를 갖고 있으며 본 논문에서는 팽창재의 적용성을 높이기 위하여 실시한 여러 조건하에서 팽창재 반응률 특성에 관한 연구내용을 기술한다. 연구결과를 요약하면 다음과 같다. 1)팽창재의 반응은 주위온도에 큰 영향을 받는다. 2) 팽창재의 성능을 충분히 발휘하기 위하여는 주위 온도 조건에 따라 천공직경을 적절히 조절하는 것이 필요하다. 3) 낮은 주위 온도 조건에서 팽창재의 반응은 압력이 증가하는 시간이 느리고 따라서 최대 팽창압이 높은 온도 조건에 비해서 낮게 나타난다. 4)팽창압이 증가하는 시간은 팽창재와 물과의 반응률에 좌우된다.

  • PDF

Applicability of Expansive Additive on Reducing Shrinkage in Ultra-High-Strength-Concrete (팽창재에 의한 초고강도 콘크리트의 수축저감)

  • Seo, Kyong-Won;Baek, Ki-Hyun;Kim, Young-Jin;Kwak, Do-Yeon
    • Magazine of the Korea Concrete Institute
    • /
    • v.21 no.1
    • /
    • pp.61-67
    • /
    • 2009
  • 본 연구에서는 초고강도 콘크리트의 자기수축 제어대책으로서 팽창재를 이용하는 경우의 적절한 첨가량 및 유효성에 대하여 확인하였고, 재팽창 현상에 대해서 검토하였다. 그 결과 물시벤트비가 극히 낮은 초고강도 콘크리트의 특성상 과첨가의 경우는 미반응의 팽창재가 잔존하고 재팽창 할 가능성이 있는 것으로 나타났으며 초고강도 콘크리트용의 팽창재로서는 가능한 미수화 팽창재가 잔존하지 않는 팽창재 즉 팽창성능을 충분히 가지면서 수화반응이 빠른 조강성의 비표면적이 큰 팽창재가 바람직한 것을 제안하고 있다.

Evaluation of strength characteristics according to expansion amount of ground reinforced expanded polyol (지반보강 팽창약액의 팽창성능 및 밀도에 따른 강도특성 평가)

  • Kang, Hyounhoi;Kim, Kisung;Kim, Juho;Park, Jeongjun
    • Journal of the Society of Disaster Information
    • /
    • v.13 no.1
    • /
    • pp.35-42
    • /
    • 2017
  • In this study, to quantitatively evaluate the strength characteristics of the inflatable liquid used for the recovery of soft ground or partial settlement, the inflatable liquids were prepared by dividing the inflatable capacity and the strength characteristics were analyzed according to the conditions. The experimental group was divided into two groups: relatively high expansion group and low expansion group. The specimens were prepared by controlling the volume of 10 ~ 30% of the maximum expansion volume, and the strength of the specimens were evaluated. The compressive strength of the high expansion group and low expansion group was about 2.1 times.

Analysis of Efficiencies of Scroll Expander for Micro Scale Organic Rankine cycle (초소형 유기랭킨사이클용 스크롤팽창기 효율 특성 분석)

  • Shin, Dong Gil
    • Journal of Energy Engineering
    • /
    • v.21 no.4
    • /
    • pp.398-401
    • /
    • 2012
  • In this Study, efficiencies of the scroll expander under development for organic Rankine cycle using engine waste heat of vehicle have been analyzed and compared with the commercial scroll expander. While operating organic Rankine cycle for analysing expander efficiencies, power of expander, inlet temperature of expander, inlet pressure of expander and the flow rate of the working fluid(refrigerant R134a) have been measured. Overall efficiency of the expander has been shown the very low level compared with the overall efficiency of the commercial expander. Especially, because the low volumetric efficiency has much effect on overall efficiency, the working fluid leakage trouble of expander has to be solved surely for improvement of the expander overall efficiency.

Experimental Study of Vane Expander Prototype Applied to Micro Organic Rankine Cycle (초소형 유기랭킨사이클 적용 프로토 타입 베인 팽창기에 관한 실험적 연구)

  • Shin, Dong Gil;Kim, Young Min
    • Journal of Energy Engineering
    • /
    • v.23 no.4
    • /
    • pp.230-235
    • /
    • 2014
  • In this study, performances of the vane expander protype for micro organic Rankine cycle with refrigerant R134a as a working fluid have been analyzed. While operating organic Rankine cycle for analysing expander efficiencies such as overall efficiencies, volumetric efficiencies and mechanical efficiencies under $110^{\circ}C$ of expander inlet temperature, the power of the expander, inlet temperature of expander, inlet pressure of expander and the flow rate of the working fluid(refrigerant R134a) have been measured while varying the rotational speed of the expander. It was found that the more the expander revolution speed is high, the more the expander power, overall efficiencies and volumetric efficiencies are higher. In case of 500 rpm of rotational speed, overall efficiencies are 6~7% and in case of 1000 rpm, overall efficiencies are 11~12%. We have found that low volumetric efficiencies result in poor overall efficiencies.

온도 및 습도의 계측

  • 류관희
    • Journal of Bio-Environment Control
    • /
    • v.1 no.2
    • /
    • pp.187-191
    • /
    • 1992
  • 온도의 계측에는 열팽창(Thermal expansion), 열전기(thermoelectricity), 전기저항(resistance)등의 원리를 이용하고 있다. (1) 열팽창식 온도계 물체의 열팽창 원리를 이용하는 온도계에는 두 금속의 열팽창 계수의 차이를 이용하는 바이멜탈 온도계, 액체의 팽창을 이용하는 유리 온도계, 기체 압력이 온도에 비례하는 것을 이용하는 압력식 온도계 등이 있으나, 이중에서 유리 온도계가 가장 널리 사용되고 있다.(중략)

  • PDF

Dynamic Analysis of Expansion in Perlite (퍼라이트팽창의 동적해석)

  • Hahm, Yeong-Min
    • Applied Chemistry for Engineering
    • /
    • v.23 no.2
    • /
    • pp.143-147
    • /
    • 2012
  • Since the expansion of perlite occurs in a few second in high temperature, it is difficult to identify an expansion phenomenon through experiments. In order to explain this phenomenon, a numerical study has been carried out by setting a model that water vapour diffuses to a tiny bubble existing in perlite melts and then makes the bubble grow and perlite expand. When the bubble grew and the perlite expanded due to the diffusion of water vapour, the dynamic temperature of perlite decreased. Meanwhile, the dynamic pressure of bubble increased at the beginning as water vapour diffuses in melts, but rather decreased after a rapid expansion of bubble.

A Study on the Cracking Control Effects of Shrinkage Reduction Concrete (수축보상형 콘크리트의 균열억제 효과에 관한 연구)

  • Choi, Hyeong-Gil;Kim, Gyu-Yong;Noguchi, Takafumi
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.5
    • /
    • pp.569-577
    • /
    • 2015
  • The aim of this study is to qualitatively evaluate the cracking control effects of expansive concrete used in reinforced concrete building. The result of experiments in laboratory shows that autogenous shrinkage and drying shrinkage are suppressed by using expansive additive. The tensile stress-strength ratio is lower in expansive concrete than normal concrete under fully restrained condition. Compression stress could be effectively generated in early age in the walls in buildings by the use of expansive additive, and tensile stress due to drying shrinkage at later age eventually decreased. Additionally, visual observation at long-term ages shows that the cracking area of expansive concrete was approximately 35% of normal concrete, which confirms that the use of expansive additive reduces concrete cracking in reinforced concrete buildings.

Exergy analysis on the power recovery of LNG supply system (냉열 에너지의 동력 회수에 대한 엑서지 해석 방법에 관한 연구)

  • Park, Il-Hwan;Kim, Choon-Seong
    • The Journal of Korean Institute for Practical Engineering Education
    • /
    • v.3 no.1
    • /
    • pp.9-14
    • /
    • 2011
  • The expansion work that is wasted through the irreversible expansion through the PC valve of decompression process of the natural gas governor station can be recovered by replacing the process by an isentropic expansion. The energy and exergy analyses for the two decompression process models of power producing and current decompression process model are presented. Analysis results showed that the exergy by gas supply is 56.29%, the exergy by producing power is 32.12 % in case of preheating system and 22.52% in case of non-preheating system. The dead exergy at the PCV is generated much more network. As these results, the usefulness of exergy analysis is verified.

  • PDF