• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.309-314
• /
• 2007

Ameloblastic fibroma is a rare benign tumor, accounting for only 2.5% of odontogenic tumors. It occurs during the period of tooth formation between the ages of 5 and 20 years with the average age being about 15. There is no gender predilection. In the majority of cases, the lesion arises in the mandible, presenting the swelling of jaw and the failure of tooth eruption. In this report, the main concern of the patient was the failure of eruption of lower permanent and deciduous molars. Radiographic investigation showed a radiolucency surrounding the crown of unerupted teeth. Surgical intervention and histopathologic study revealed the lesion to be ameloblastic fibroma. After the surgery, no evidence of residual tumor or recurrency was found. These patients are scheduled for the long-term continuing evaluation of the eruption of adjacent teeth and successor with radiographic study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1253-1257
• /
• 2009

The effects of seven commercial gums (xanthan gum, guar gum, pectin, gum arabic, gellan, locust bean gum, and sodium alginate) at different concentrations (0, 0.3, and 0.6%) on flow properties of sweet potato starch (SPS) pastes were investigated. Flow behavior characteristics were adequately described by power law flow model, and yield stress was also measured by vane method. SPS-gum mixtures (5% w/w) at $25^{\circ}C$ were found to have high shear-thinning flow behavior with yield stress, and their consistency index (K) and apparent viscosity ($\eta_{a,100}$) increased with elevated gum concentration, except for pectin and sodium alginate. Vane yield stress ($\sigma_o$) value of SPS-pectin mixture was lower when compared to other mixtures while that of SPS-gellan mixture was much higher. Most of the gums, except for pectin, gum arabic, and sodium alginate, showed a synergistic effect on the elastic properties of SPS-gum mixtures. In general, the flow properties of SPS-gum mixtures appeared to be strongly influenced by the addition of gum, and dependent on the type and concentration of gum.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.1
• /
• pp.134-143
• /
• 2016

We evaluated the antioxidant properties of adzuki beans and the quality characteristics of sediment using various cultivation methods. There were significant differences in total polyphenol and flavonoid contents in beans grown using different methods of cultivation (p<0.05). Also, DPPH and ABTS radical-scavenging activities were significantly different depending on cultivation method (p<0.05). The sediment yield before drying of Chungju-pat, Hongeon, and Arari was 296.64~339.01, 271.36~282.24, and 268.21~292.32%, respectively, and the sediment yield after drying was 71.68~85.41, 77.90~85.19, and 74.15~78.65%, respectively. The L-value of Chungju-pat and Arari sediments revealed a significant difference given different cultivation methods (p<0.05), but Hongeon sediment did not show a significant difference. There was a significant difference in the a- and b-value of adzuki bean sediments cultivated using different methods (p<0.05). The particle size of Chungju-pat, Hongeon, and Arari sediments was 66.21~98.80, 61.62~97.07, and $82.96{\sim}106.71{\mu}m$, respectively, and all were significantly different depending on cultivation method (p<0.05). There were also significant differences in the water absorption index, water solubility index, and swelling power when different cultivation methods were used (p<0.05).

• Korean journal of food and cookery science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1988

The physicochemical properties and gel-forming properties of corn & red bean crude starches were investigated. The results were as follows: 1. The shape of corn crude starch granule was polygonal and the mean value of minor axis and major axis were $11.5\mu\textrm{m}$ and $14.9\mu\textrm{m}$, respectively. In the meantime, the shape of red bean crude starch granule was oval and the mean value of minor axis and major axis were $22.3\mu\textrm{m}$ and $31.4\mu\textrm{m}$. 2. Amylose content of corn and red bean refined starch were 16.52 and 43.61% respectively. 3. Blue value of corn and red bean crude starch were 0.099 and 0.842, respectively. 4. Amylose of corn had molecular weight of 107,000 and degree of polymerization of 660. Amylopectin had degree of branching of 6.9 per 100 glucose units and glucose units of 14.6 persegment of amylopectin. Amylose of red bean had molecular weight of 118,000 and amylopectin had degree of branching of 5.2. 5. Water binding capacities of corn and red bean starch were 238.5 and 284.8. 6. Both swelling powers of corn and red bean starch were increased rapidly from $70^{\circ}C$ to $90^{\circ}C$. 7, Gelatinization of corn and red bean were 75.6 and $61.8^{\circ}C$. 8. Brabender hot-paste viscosities of corn at 6% and 8% showed the similar amylogrm patterns with peak viscosity. And red bean had no peak viscosity. 9. The difference of sensory characteristics for ‘Mook’ and kidney bean & red bean starch gels was significant.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.710-715
• /
• 1993

Physicochemical properties of defatted and lipid-reintroduced kidney bean, mung bean, and corn starches were investigated. Granule shapes of kidney bean and mung bean starches were oval/round, but corn starch was polygonal and each shape was not changed after defatting and lipid reintroducing. The granule sizes of starches ranged $12{\sim}45{\mu}m,\;10{\sim}32{\mu}m\;and\;5{\sim}20{\mu}m$ respectively, but those of lipid reintroduced starches increased slightly. All starches showed Ca type in x-ray diffraction but relative crystallinity was decreased by defatting. The amylose contents of starches increased after defatting but decreased after lipid-reintroduction. The swelling power and solubility of untreated starches at each temperature increased by defatting but decreased by lipid-reintroduction except corn starches. The initial pasting temperatures of kidney bean, mung bean and corn starches by amylograph were $87,\;67\;and\;80^{\circ}C$ respectively, and those of them were lowered by defatting. The peak viscosity, height at $50^{\circ}C$, consistency and setback on amylogram of starches decreased by defatting but increased by lipid-reintroduction.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.385-391
• /
• 2006

Physicochemical properties of hydroxypropylated waxy rice starches were investigated to reduce steeping-time of yukwa (Korean oil-puffed rice snack) processing. Swelling power of hydroxypropylated waxy rice starch increased at relatively higher temperature $(60^{\circ}C)$ than native waxy rice starch $(70^{\circ}C)$. Solubility of hydroxypropylated waxy rice starches increased with increasing propylene oxide content. Pasting temperature $(66.3-66.9^{\circ}C)$ and peak viscosity (216-232 RVU) of hydroxypropylated waxy rice starch were higher than those of native starch (179 RVU) and increased with increasing propylene oxide content. DSC thermal transitions of hydroxypropylated waxy rice starches shifted toward higher temperature. Amylopectin melting enthalpy of hydroxypropylated waxy rice starch (8.4-9.2 J/g) was similar to native starch (9.0 J/g). X-ray diffraction patterns of native and hydroxypropylated waxy rice starches showed typical A-type pattern with no significant differences between them, suggesting hydroxypropylation only affected amorphous region. Results suggest hydroxypropylated waxy rice starch is not applicable for yukwa due to low puffing efficiency and dark color.

• YAKHAK HOEJI
• /
• v.37 no.5
• /
• pp.511-519
• /
• 1993

The short and variabke transit of drug throught GI tracj and the inter-and intra-subject variations of the transit restrict the sustained drug absorption after oral adminstration. These restrictions may be solved by retaining the dosage forms in the stomach. Then the dosage form will act as a platform which releases the drug slowly and makes the GI absorption occur for a long time. In this study, as the platforms, PVP hydrogels were synthesized by chemical and y-irradiation method in the cylindrical test tube. The chemical method means the synthesis of the hydrogel by heating the mixed solution of N-vinyl-2-pyrrolidone [monomer], acrylated albumin [crosslinking agent], 2, 2'-agobis(2-methylpropionitrile) [initiator] and proxyphylline [drug] at $65^{\circ}C$ for 5 hr. The $\gamma$-irradiation method means the synthesis of the hydrogel by irradiation with $^{60}$ Co $\gamma$-ray of the mixed solution of the monomer, acrylated albumin, and flurbiprofen [drug] at room temperature with total 0.2 Mrad for 3 hr. Our intention is to design the hydrogel tablet (diameter : 1.20 cm, thickness : 0.60 cm) which swells in the gastric fluid after oral administration to such a size that passing through the pylorus could be inhibited during the period of drug release. After releasing drug, the hydrogel should be degraded by the enzymeatic digestion in the stomach, or by hydrolysis and eventually solubilized. Thus, in votro tests were performed to examine the factors that affect swelling and drug release from the PVP hydrogels. Experimental results show that the hydrogels swell to a size larger than the diameter of the pylorus(l.3$\pm$0.7 cm) and the hydrogel prepared by the chemical method is digested by pepsin. But the hydrogel prepared by the $\gamma$-irradiation method was not digested by the pepsin and just collapsed with time. Thus, the swelling of the hydrogel synthesized by $\gamma$-irradiation was independent albumin acrylation time and pepsin concentration. But drug content and radiation dose affected the swelling and drug release kinetics of the hydrogel. Drug release from the hydrigels was prolonged up to about 24 hr. Therefore, it was concluded that by adjusting these factors, the albumin-crosslinked PVP hydrogel synthesized by $\gamma$-irradiation method is expected to be retained in the stomach for up to 60hr and be a potential platform of drugs for long-term GI absorption.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2020

Recently, since atopic dermatitis is sensitive to skin irritation, it has been suggested that the development of a patch that can effectively exhibit adhesion and absorption to a specific local area while minimizing skin irritation, and capable of appropriate drug release should be given priority. In this study, we tried to develop a hydrogel patch that minimizes skin irritation, adheres effectively to a specific area, and promotes absorption. The atopic patch was formulated into a super-absorbent hydrogel sheet using a freeze drying method. Cell viability assay was carried out using keratinocytes (HaCaT cell) and fibroblasts (L929 cells). In order to investigate the physical properties, FT-IR, FE-SEM, porosity analysis and swelling behavior were investigated. As a result, the newly prepared HA-Dex hydrogel patch was verified by biocompatibility and physical evaluation. In addition, the manufactured hydrogel patch has sufficient moisture absorption capacity and can relieve itching of atopic skin, and is expected to be applied to various drug delivery products for the treatment of atopic dermatitis in the future.

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.89-99
• /
• 1976

The grafting of acrylic acid in aqueous solution to polyvinyl chloride fibers tab been studied in the presence of ferrous, ferric, and cupric salts, The mutual irradiation technique was adopted using a Co-60 source or a Van do Graaff accelerator. The grafting and homopolymerization were suppressed by the cations. Particularly the grafting was suppressed by the cations in the following order of effectiveness : $Cu^{2+}$>$Fe^{2+}$>$Cu^{3+}$. The rate of grafting (in %/hr) was proportional to the 0.76th power of the dose rate over the range from 8.5f $10^3$ rad/hr to $1.4\times10^5$ rad/dr. The apparent activation energy for the grafting was determined to be 6.1 Kcal/mole between $25^{\circ}$ and $75^{\circ}C$ for the mixture of AA-HaO-$(CH_2Cl)_2$, containing Mohr's salt, $4\times10^{-3}$ mole/l. The increase of the grafting was observed when total dose and dose intensity were raised, or when ethylene dichloride as a swelling agent was saturated in the monomer mixture. The grafted polyvinyl chloride fibers showed considerable improvement in moisture regain, heat shrinkage, and melting properties, but tensile properties were not significantly affected by grafting.