• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.108-116
• /
• 2013

The input buffer in Network on Chip (NoC) router plays a key role in on-chip-network performance, which is utilized in flow control and virtual channel. However, increase in area and power due to input buffers as the network size gets larger is becoming severe. To solve this problem, a bufferless deflection routing without input buffer was suggested. Since the bufferless deflection routing shows poor performance at high network load, other approaches which combine the deflection routing with small size side buffers were also proposed. Nonetheless these new methods still show deficiencies caused by frequent path collisions. In this paper, we propose a modified deflection routing technique using a location based priority. In comparison with existing deflection routers, experimental results show improvement by 12% in throughput with only 3% increase in area.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2020

Despite the same system architecture and operation principle, Advanced Metering Infrastructure (AMI) and Internet of Things (IoT) are recognized as a heterogeneous system. This is due to the different object modeling and communication protocols used in smart meters and sensors. However, data interworking between AMI and IoT is expected to be inevitable in the future. In this paper, we propose Device Language Message Specification (DLMS) to Lightweight Machine to Machine (LwM2M) conversion model. The proposed interworking model can reduce the packet size by 46.5% compared to that of the encapsulation method.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.129-142
• /
• 2004

As the Internet gets faster, the demand for high-speed routers that are capable of forwarding more than giga bits of data per second keeps increasing. In the previous research, Bitmap Trie algorithm was developed to rapidly execute LPM(longest prefix matching) process which is Well known as the Severe performance bottleneck. In this paper, we introduce a novel algorithm that drastically enhanced the performance of Bitmap. Trie algorithm by applying three techniques. First, a new table called the Count Table was devised. Owing to this table, we successfully eliminated shift operations that was the main cause of performance degradation in Bitmap Trie algorithm. Second, memory utilization was improved by removing redundant forwarding information from the Transfer Table. Lastly. the range of prefix lookup was diversified to optimize data accesses. On the other hand, the processing delays were classified into three categories according to their causes. They were, then, measured through the execution-driven simulation that provides the higher quality of the results than any other simulation techniques. We tried to assure the reliability of the experimental results by comparing with those that collected from the real system. Finally the Enhanced Bitmap Trie algorithm reduced 82% of time spent in previous algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.94-104
• /
• 2003

This paper addresses the issue of applying the concept of IT everywhere IT inside to R&D planning system We investigate R&D planning system, mid term IT technology development plan, and the fact and outlook of wireless communications technology in Korea and also focus o deriving core wireless telecommunications technologies and priority setting under R&D planning system, using Analytic Hierarchical Process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.227-235
• /
• 2012

Holes that generated by the unpredictable and harsh nature application environment or uneven energy consumption are an inevitable phenomenon in wireless sensor networks. Most of the existing schemes for this hole problem tend to use a static detour path to bypass a hole. The static detour path may lead to uneven energy consumption of the nodes on the boundary of the hole, thus it may enlarge the region of holes. At the same time, traffic would concentrate on the nodes on the boundary of the hole and tend to be depleted quickly. To solve this problem, we introduce energy-efficient grid-based geographic routing and hole-detouring scheme by taking advantage of grid anchor point in wireless sensor network with holes. The location of hole detour anchor node is dynamically shifted in grid cell. just generating dynamic hole detour paths to reduce total energy consumption. Simulation results are provided to validate the claims.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.239-246
• /
• 2014

In the context of wireless sensor networks, one of major issues is energy conservation. For low power communication, by utilizing our experimental results for the relation between clock drift and synchronization interval, we designed a new protocol which can support a wide range of duty cycles for applications with very low traffic rate and insensitive delay. The transmission (TX) node in the protocol synchronizes with the reception (RX) node very before transmitting a packet, and it can adaptively estimate the synchronization error size according to the synchronization interval from minutes to hours. We conducted simulations and a testbed implementation to show the efficacy of the proposed protocol. We found that our protocol substantially outperforms other state-of-the-art protocols, resulting in order-of-magnitude increase in network lifetime over a variety of duty cycles.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.41-50
• /
• 2008

Recently amount of traffic into the network rapidly increase since multimedia streaming services is generally adopted for application. In addition, various network management systems have been suggested for providing a stable service and QoS guarantee. It is necessary for such systems to have QoS monitoring module in order to evaluate acceptance or violation of QoS requirements by analogizing a state information of each node within network. In this paper, we suggest a network management system to evaluate QoS level between end-to-end agents and analysis traffics transmitted between them. The proposed system is implemented for the purpose of collecting network traffic information and monitoring of the view. The proposed system makes user easily understand information of QoS parameters such as throughput, delay and jitter by adopting a method of visual and numerical representation. To achieve this, we purportedly generate test packet into network for confirming acceptance or violation of QoS requirements from point of view of multimedia application service.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.25-33
• /
• 2013

P2P(Peer-to-Peer) architecture can reduce the network bandwidth and resource on the server since peers exchange data chunks with each other, while server-client architecture causes a lot of traffic on the server. Peers receive a data more reliably when the number of participating peer increases. Currently, P2P traffic has accounted for about 65% of the world's Internet traffic and diverse P2P streaming services have launched combining to video streaming technology. However, the requirements and data chunk delivery algorithms for mobile P2P streaming service should be investigated, since the existing P2P technologies have been developed and designed for the wired network. In particular, the bandwidth fluctuation caused by user mobility, wireless packet collisions, and packet losses brings about different problems on the mobile P2P streaming service compared to existing P2P streaming service. In this paper, we analyzed the problem of mobile P2P streaming services in the 802.11n wireless LAN environment through experiments.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2012

This paper proposes automatic precision approach radar (PAR) control system using digital signal to increase the safety of aircraft, and discrete event systems specification (DEVS) methodology is utilized to verify the proposed system. Traditionally, a landing aircraft is controlled by the human voice of a final approach controller. However, the voice information can be missed during transmission, and pilots may also act improperly because of incorrectness of auditory signals. The proposed system enables the stable operation of the aircraft, regardless of the pilot's capability. Communicating DEVS (C-DEVS) is used to analyze and verify the behavior of the proposed system. A composed C-DEVS atomic model has overall composed discrete state sets of models, and the state sequence acquired through full state search is utilized to verify the safeness and the liveness of a system behavior. The C-DEVS model of the proposed system shows the same behavior with the traditional PAR control system.