• Journal of Korea Port Economic Association
• /
• v.36 no.1
• /
• pp.129-140
• /
• 2020

In the future, the global container handling market will be reorganized into larger ships and shipping alliances, and the bargaining power of shipping companies will be further strengthened. Therefore, the global terminal operator (GTO), which has a global network, vast experience, and operational know-how, is expected to strengthen its competitiveness. In Korea, the central government promoted the development of GTOs in the mid-2000s, but it failed, mainly due to disagreements between port stakeholders. In this study, the macroeconomic indicators that have the same effect in all regions were used to analyze GTO management performance. In the short term, it could be used to establish the business strategy of domestic terminal operators based on changes in macroeconomic indicators. In the long term, it would be used to establish a promotion strategy for GTOs in Korea. The results of analyzing the impact of macroeconomic indicators on the GTO's profit show that the GTO's profit is significantly affected by cargo handling capacity, the consumer price index of the United States, the Shanghai Composite Index, the Crude Oil Price, and the London Inter-bank Offered Rate (LIBOR). However, the scale of impact was not significantly different between public and private GTOs.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.127-136
• /
• 2001

To increase the structural integrity of concrete box culvert good compaction by the dynamic compaction roller with bi9 capacity is as effective as good backfill materials. It is needed for effective compaction that a compaction roller closes to concrete structure with high frequency. However structural distress of the culvert could be occur due to the excessive earth pressure by great dynamic compaction load. To investigate the characteristics of Induced stress by compaction, a box culvert was constructed with changing cushion materials and compaction methods. Two types of cushion material such as tire rubber chip and EPS(Expanded Polystyrene) were used as cushion panels and they are set on the culverts before backfill construction. Laboratory test result of cushion material says that the value of dynamic elastic modulus of rubber is lesser than that of EPS. On the other hand, material damping of rubber material is greater than that of EPS. In most case, dynamic compaction rollers with 10.5 ton weights were used and vibration frequency was applied 30Hz for the great compaction energy. This paper presents the main results on the characteristics of dynamic earth pressures during compaction. The amounts of induced dynamic pressures$(\Delta\sigma\;h)$ by compaction are affected with construction condition such as compaction frequency, depth of pressure cell, distance between roller and the wall of culvert and roller direction. Based on the measured values dynamic lateral pressure on the culverts, it could be said that orthogonal direction of roller to the length of culvert is more effective to compaction efficiency than parallel direction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5476-5487
• /
• 2013

From foreign and/or domestic investors' perspectives, it may be interesting to find any financial attributes or profile of the firms headquartered in 'Chungcheong' province concerning profitability, given that this subject so far drew less attention in the previous literature. This study performed three hypothesis tests on the profitability indicator by utilizing the models such as the 'panel data' one and the 'logistic' regression one, applying a modified 'Dupont' system. With respect to the major findings, the results identified that the proxies measuring leverage across the book-value(BVLEV1) and the market-value(MVLEV1) bases, were statistically significant constituents determining profitability. Another explanatory variable, SIZE, with its positive and statistically significant relationship to the indicator, represented that the firms in the province were smaller than their counterparts in the other regional areas in Korea. DRELY applying a modified 'Dupont' system, found to be the only statistically significant discriminating factor between these comparison groups. As one of the primary contributions of this study, the outcomes may be used by the financial institutions operated across the regions including Seoul Metropolitan area, when implementing their lending practices to provide funds for potential borrowers such as the firms belonging to 'Chungcheong' province.

• Korean Journal of Social Welfare
• /
• v.53
• /
• pp.7-29
• /
• 2003

This study estimates the effect of economic loss including parental job loss and income loss on adolescents' educational attainment before and after family income and poverty are controlled for. Results from this study show that both parental job loss and income loss are negatively associated with the number of schooling years completed by adolescents and the probability that adolescents would enter a college. The negative relationship between economic loss and adolescents' educational attainment persists after income levels are controlled for. Income levels also have a statistically significant effect on adolescents' educational attainment. Among the various measures of income levels, poverty has an especially larger effect. Although the results are not consistent across estimated models, the effects of parental job loss and income loss are as large as that of poverty. Results for the models separately estimated by the sex of adolescents show that female adolescents are more negatively affected by both economic toss and income levels. There is little evidence that male adolescents are negatively affected by economic loss. Yet, male adolescents are negatively affected by income levels including poverty. Findings from this study suggest that societal support for families experiencing economic loss should be improved to avoid the harmful effect of the loss on adolescents' educational attainment. More targeted efforts should be made to financially support families facing both economic loss and poverty.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.167-167
• /
• 2013

최근에 산화물 형광체는 황화물 형광체에 비해 높은 화학적 안정성을 나타내기 때문에 백색 발광 다이오드, 전계방출 디스플레이와 플라즈마 디스플레이 패널에 그 응용성을 넓히고 있다. 마그네슘 니오베이트(magnesium niobate, MgNb2O6)는 우수한 유전 특성(상대 유전상수=18.4)을 나타내기 때문에 마이크로파 유전체로 응용 가능하며, 단일상 릴랙서 페라브스카이트(relaxor perovskite) Pb(Mg1/3Nb2/3)O3을 합성하기 위한 전구체 (precursor)로 널리 사용되고 있으며, 나이오븀산염 이온에서 다양한 색상을 방출하는 활성제 이온으로 효율적인 에너지 전달이 일어남으로써 Sm3+, Dy3+, Eu3+와 같은 희토류 이온의 좋은 모체 격자로 개발할 수 있다. 본 연구에서는 마그네슘 니오베이트 MgNb2O6 모체 결정에 다양한 활성제 이온, 즉 Eu3+, Sm3+, Dy3+, Tb3+를 선택적으로 주입하여 발광 효율이 높은 천연색 형광체를 합성하고자 한다. 특히, 모체 결정에 주입되는 활성제 이온 주위의 국소적인 환경이 반전 대칭에서 변형되는 척도를 조사하여 활성제의 주 발광 파장의 세기가 최대가 되는 최적의 조건을 결정하고자 한다. Mg1-1.5xNb2O6:REx3+ 형광체 분말 시료는 초기 물질 MgO, Nb2O5와 희토류 이온을 화학 반응식에 맞게 정밀 저울로 측량하여 플라스틱 용기에 ZrO2 볼과 함께 넣고, 소정의 에탄올을 채운 뒤 밀봉하고서, 300 rpm의 속도로 20시간 볼밀 (ball-mill) 작업을 수행하였다. 그 후, 체(sieve)로 ZrO2 볼을 걸러낸 다음에 혼합된 용액을 각 비커에 담아서 $40^{\circ}C$의 건조기에서 24시간 건조하였고, 건조된 시료를 막자 사발에 넣고 잘게 갈고 80 ${\mu}m$의 체로 걸러낸 후에, 알루미나 도가니에 활성제 이온별로 각각 담아, 전기로에 장입하여 매분당 $5^{\circ}C$의 비율로 온도를 상승시켜 $350^{\circ}C$에서 5시간 동안 하소 공정을 실시한 후에, 온도를 계속 일정한 율로 증가시켜 $1,200^{\circ}C$에서 5시간 동안 소성하여 합성하였다. 합성된 형광체 분말의 결정 구조는 $Cu-K{\alpha}$ 복사선(파장: 1.5406)을 사용하여 X-선회절장치로 측정하였으며, 형광체의 표면 형상은 전계형 주사전자현미경으로 관측하였다. 흡광와 발광스펙트럼은 제논 램프를 광원으로 갖는 형광 광도계를 사용하여 측정하였다. 모체 결정에 활성제 이온 Eu3+, Sm3+, Dy3+, Tb3+가 도핑된 형광체 분말은 각각 적색, 주황색, 황색, 녹색 발광이 관측되었다. 각 발광 스펙트럼과 결정 입자의 크기와 형상 사이의 상호 관계를 조사하였다. 실험 결과로부터, 각 형광체의 발광 파장은 활성제 이온의 종류 와 서로 밀접하게 관련되어 있으며, 형광체 시료 합성시 활성제 이온의 농도를 선택적으로 조절함으로써 발광의 세기를 제어할 수 있음을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.81-81
• /
• 2013

반도체, LCD, MEMs 등 미세 전자소자의 제작과 깊은 관련이 있는 IT 산업은 자동차 산업과 함께 세계 경제를 이끌고 있는 핵심 산업이며, 그 발전 가능성이 크다고 할 수 있다. 이 중 반도체, LCD 공정 기술에 관해서 대한민국은 세계를 선도하여 시장을 이끌어 나가고 있는 실정이다. 이들의 공정기술은 주로 높은 수율(yield)을 기반으로 한 대량 생산 기술에 초점이 맞추어져 있기 때문에, 현재와 같은 첨예한 가격 경쟁력이 요구되는 시대에서 공정 기술 개발을 통해 수율을 최대한으로 이끌어 내는 것이 현재 반도체를 비롯한 미세소자 산업이 직면하고 있는 하나의 중대한 과제라 할 수 있다. 특히 반도체공정에 있어 발전을 거듭하여 현재 20 nm 수준의 선폭을 갖는 소자들의 양산이 계획 있는데 이와 같은 나노미터급 선폭을 갖는 소자 양산과 관련된 CD (critical dimension)의 감소는 공차의 감소를 유발시키고 있으며, 패널의 양산에 있어서 생산 효율 증가를 위한 기판 크기의 대형화가 이루어지고 있다. 또한, 소자의 집적도를 높이기 위하여 높은 종횡비(aspect ratio)를 요구하는 공정이 일반화됨에 따라 단일 웨이퍼 내에서의 공정의 균일도(With in wafer uniformity, WIWU) 및 공정이 진행되는 시간에 따른 균일도(Wafer to wafer uniformity)의 변화 양상에 대한 파악을 통한 공정 진단에 대한 요구가 급증하고 있는 현실이다. 반도체 및 LCD 공정에 있어서 공정 균일도의 감시 및 향상을 위하여 박막, 증착, 식각의 주요 공정에 널리 사용되고 있는 플라즈마의 균일도(uniformity)를 파악하고 실시간으로 감시하는 것이 반드시 필요하며, 플라즈마의 균일도를 파악한다는 것은 플라즈마의 기판 상의 공간적 분포(radial direction)를 확인하여 보는 것을 의미한다. 현재까지 플라즈마의 공간적 분포를 진단하는 대표적인 방법으로는 랭뮤어 탐침(Langmuir Probe), 레이저 유도 형광법(Laser Induced Fluorescence, LIF) 그리고 광섬유를 이용한 발광분광법(Optical Emission Spectroscopy, OES)등이 있으나 랭뮤어 탐침은 플라즈마 본연의 상태에서 섭동(pertubation) 현상에 의한 교란, 이온에너지 측정의 한계로 인하여 공정의 실시간 감시에 적합하지 않으며, 레이저 유도 형광법은 측정 물질의 제한성 때문에 플라즈마 내부에 존재하는 다양한 종의 거동을 살필 수 없다는 단점 및 장치의 설치와 정렬(alignment)이 상대적으로 어려워 산업 현장에서 사용하기에 한계가 있다. 본 연구에서는 최소 50 cm에서 최대 400 cm까지 플라즈마 내 측정 거리에서 최대 20 mm 공간 분해가 가능한 광 수광 시스템 및 플라즈마 공정에서의 라디칼의 상태 변화를 분광학적 비접촉 방법으로 계측할 수 있는 발광 분광 분석기를 접목하여 플라즈마 챔버 내의 라디칼 공간 분포를 계측할 수 있는 진단 센서를 고안하고 이를 실 공정에 적용하여 보았다. 플라즈마 증착 및 식각 공정에서 형성된 박막의 두께 및 식각률과 공간 분해발광 분석법을 통하여 계측된 결과와의 매우 높은 상관관계를 확인하였다.

• International Area Studies Review
• /
• v.22 no.2
• /
• pp.121-138
• /
• 2018

This study aims to suggest effective management performances of nonprofit arts organizations among competitive environment. To examine the factors which affect the performance of nonprofit performing arts organizations such as external environment, cultural capital, orchestra characters and government grants, this study analyzed the data of 990 tax forms of the US Internal Revenue Service(IRS) of the top 73 symphony orchestras and government sources in USA. Independent variables are measured as sponsorship amount which is the biggest part of orchestras' income, and ticket sales which is profit of inherent business purpose. As a result, the performance of the orchestra is affected positively by the income and influenced by the orchestras' characteristics including age, size, and conductor. Also government grants to the orchestras are essential for organizations to sustain their business. But, there are two different sides on these effects that small to medium groups are influenced by crowding in effect and bigger groups are more likely conducted by business overview. Lastly, cultural capital is no significant relationships to orchestras' management performances. This scope of the study is limited to American symphony orchestras; however, this study is significant in that empirical analysis on nonprofit performing arts organizations from an economic view point and contribute on other nonprofit arts organizations to develop their strategic plan for sustainable business.

• 한국노년학
• /
• v.41 no.3
• /
• pp.421-444
• /
• 2021

The purpose of this research is to examine the reciprocal relationships between depression and marital satisfaction among older couples. For longitudinal dyadic analysis, this study sets up a research model based on the Actor-Partner Interdependence Model, the Common Fate Model, and Autoregressive Cross-Lagged Model. Data came from four annual waves from the 10th year (2015) to the 13th year (2018) of the Korean Welfare Panel Survey and the final sample comprised a total of 1,383 married couples over 60 years of age in 2015. Structural Equation Modeling identified the reciprocal relationship between depression and marital satisfaction among older couples, with higher marital satisfaction of older couples leading to lower depression of husbands' and wives', and with higher depression of husbands' and wives' inducing lower marital satisfaction of the couples. Thus, this study suggested that longitudinal interplay between depression and marital satisfaction can lead to a vicious cycle. Based on these findings, the need to intervene at both the individual level and the couple level was discussed in order to reduce depression and improve marital satisfaction.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.241-250
• /
• 2015

This study investigated the sensory attributes of Satsuma mandarins to provide basic data for the establishment of a quality grade establishment of mandarins. Samples of the mandarins in different sizes (small, medium, and large) were collected via organic green house cultivation, conventional cultivation without pesticides and conventional cultivation in Jeju Island. Eight trained panels performed the triplicate measurements. From the results of the quantitative descriptive analysis, mandarin samples were selected with five types of appearances (gloss intensity, color intensity, peel width, damage degree, and peel texture), three types of odors (sour, sweet, fresh), six types of tastes (sour, sweet, bitter, fresh, tasteless, and off flavor) four types of texture (hardness, granule toughness, juicy, and tough feel), and three types of after-tastes (sour, sweet, and bitter). The results of the analysis of the quality characteristics of the samples showed that their, pH, total acidity and solids contents differed depending on the size of the samples more than their cultivation methods. The correlation coefficients between the quality properties of the mandarins showed that their, sample size was positively correlated with their peel width and toughness. Moreover, the soluble solid of sample was positively correlated with its color intensity, sweet and fresh orange flavor. However, soluble solid content of the samples was negatively coreelated with their bitter flavor, tastelessness, and off flavor. In the principal component analysis of the sensory attributes data, PC1 represented the soluble solid, gross intensity, orange color, sour and sweet odor, unique mandarin flavor (sweet and, fresh orange), etc., and PC2 (26.77%) the size, pH, sample acidity, and peel texture.

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.13-18
• /
• 2013

This study was conducted to estimate the Genomic Estimated Breeding Value (GEBV) using Genomic Best Linear Unbiased Prediction (GBLUP) method in Hanwoo (Korean native cattle) population. The result is expected to adapt genomic selection onto the national Hanwoo evaluation system. Carcass weight (CW), eye muscle area (EMA), backfat thickness (BT), and marbling score (MS) were investigated in 552 Hanwoo progeny-tested steers at Livestock Improvement Main Center. Animals were genotyped with Illumina BovineHD BeadChip (777K SNPs). For statistical analysis, Genetic Relationship Matrix (GRM) was formulated on the basis of genotypes and the accuracy of GEBV was estimated with 10-fold Cross-validation method. The accuracies estimated with cross-validation method were between 0.915~0.957. In 534 progeny-tested steers, the maximum difference of GEBV accuracy compared to conventional EBV for CW, EMA, BT, and MS traits were 9.56%, 5.78%, 5.78%, and 4.18% respectively. In 3,674 pedigree traced bulls, maximum increased difference of GEBV for CW, EMA, BT, and MS traits were increased as 13.54%, 6.50%, 6.50%, and 4.31% respectively. This showed that the implementation of genomic pre-selection for candidate calves to test on meat production traits could improve the genetic gain by increasing accuracy and reducing generation interval in Hanwoo genetic evaluation system to select proven bulls.