• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1127-1134
• /
• 2017

In this study, the robot arm control system was implemented that is operated by human hands, which can be used in environments that are inaccessible to humans. This function has to be sent to the robot's arms after extracting coordinates of human hands. Through mapping and bluetooth communication we use a leap motion sensor with infrared light and Image recognition sensor.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.52-56
• /
• 2004

Pd catalyst have been used in hydrogenation, oxidation, and low temperature combustion reaction. Recently, it is candidated as a possible reagents in the partial oxidation of methanol reformers of the fuel cell. Pd catalysts, even though it is very precious and expensive, catalytic functioning is good, but it still need to be improved in the matter of durability and low catalytic activity after calcination. In this study, we synthesize the improved Pd catalyst and study their chemical functioning.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.135-136
• /
• 2018

본 논문에서는 산업현장에서 특정한 물건을 인식하고 판단하여 로봇팔로 운반할 수 있는 딥러닝을 적용한 객체 인식 기반의 로봇 팔 제어 시스템을 제안하였다. 제안한 시스템은 깊이 인식 카메라를 이용하여 3D 이미지를 촬영 하고 딥러닝으로 검출된 객체를 판별 및 분류 후 인식된 객체를 로봇 팔로 피킹 하도록 구현하였다. 이를 통해, 딥러닝과 깊이인식 카메라로 다양한 환경에서 객체를 정확히 분류 및 추적할 수 있도록 해서 스마트팩토리등 다양한 분야에 활용할 수 있는 시스템을 제안하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.80-83
• /
• 2002

정밀한 서보기술에 바탕을 두고 있는 산업용 로봇 팔은 기계적인 강성도와 서보기구들로 인하여 정확한 제어가 가능하다 그러나 로봇팔은 동작중비 관성모멘트의 변화와 기하학적인 구조로 인하여 비선형적인 시스템이다. 특히 관성모멘트의 변화는 로봇팔의 회전속도와 로봇팔이 이동시키는 대상물의 무게 등에 따라 관성모멘트는 변할 수 있다. 이로 인하여 관성모멘트의 변화에 따라 로봇팔의 정확한 위치제어가 힘들어진다. 따라서 본 논문에서는 관성모멘트의 변화에도 불구하고 강인한 응답특성을 나타내는 제어기의 설계가 요구된다. 일반적으로 PID .제어기는 설계의 용이성으로 산업현장에서 널리 사용된다. 그러나 PIB 제어기의 각 계수값을 설정하는데 많은 어려움이 발생한다. 따라서 본 논문에서는 PID 제어기의 각 계수 값을 퍼지알고리즘을 이용하여 자동으로 설계할 수 있는 자기동조 PID 제어기를 설계한다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2468-2470
• /
• 2003

비주얼 서보잉이란 로봇팔 등과 같은 제어기의 폐루프에서 입력단에 영상을 이용하는 것이다. 영상에 나타난 정보는 특징점을 통해 얻을 수 있으며, 매시간 이 특징점의 위치를 추적함으로써 제어기의 출력값을 결정한다. Optical flow를 이용하는 가나데 특징점 추적기는 특징점 추적기 중에서 성능이 우수하다고 알려져 있다. 본 논문에서는 가나데 특징점 추적기를 이용하여 실시간으로 로봇팔을 제어하고 결과를 분석하도록 한다. 실험에 이용되는 로봇팔은 전체 6축이며 기존의 5축 상용로봇의 end-effector에 ccd카메라를 좌우로 회전가능하도록 기구부를 추가하였다. 6DOF를 갖도륵 변형된 로봇팔을 기구적으로 분석하고 자코비안을 획득한 후, 로봇팔의 end-effector에 설치된 카메라를 통하여 특정 영상이 얻어지도록 로봇의 end-effector의 속도를 생성해내고, 자코비안의 역행렬을 통해 로봇의 각 관절을 제어하는 과정을 기술하고 분석한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.223-228
• /
• 2015

This paper analyses the torque characteristics of the shoulder and elbow joints of a humanoid robot arm that is useful for an object lifting and transferring task instead of human beings. For the purpose, some typical human lifting behaviors are considered, and various simulations for lifting and transferring an object have been performed by employing a humanoid robot arm having a simple configuration of shoulder and elbow joints. Through the simulation, it is shown that the torque patterns and ranges of the shoulder and elbow joints required for such a humanoid lifting and transferring task can be found earlier in the design of a humanoid robot arm. As a result, this effort is useful for us to design an effective robot arm.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.21-24
• /
• 2010

We present a novel electrochemical method to fabricate a single Pd nanowire based on direct current assisted dielectropheresis (DEP) process between two predefined metal electrodes. The electrochemical methods was investigated as functions of frequency and voltage for optimal growth conditions of Pd nanowire. The synthesized Pd nanowire have a good resistance of $1\;k{\Omega}$, diameters of several hundred nanometers on average and lengths of $8\;{\mu}m$. Finally, the single Pd nanowire was capable of detecting hydrogen in the concentration range from 100 to 2500 ppm with high sensitivity and response time, thus demonstrating its suitability for use as a hydrogen sensor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.161-164
• /
• 2008

A realization for EMG signal sensing and vertical control system of robotizing arm is presented in this paper. The system is realized that a fine EMG bio-signals of humans' arm muscle are detected by surface electrode sensor, making a high performance amplifier and filtering, converting analog into digital signal and driving a servomotor for robotizing arm. The system is experimented by monitoring multiple step vertical control angles of robotizing arm corresponding to EMG signals in moving arm muscles. The experimental result are that the vertical control level is measured to around 2 degrees and mean error is 5% approximately.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.99-113
• /
• 2020

In the future, robots and drones for the convenience of our lives in everyday life will increase. As a method for controlling this, a remote control or a human voice method is most commonly used. However, the remote control needs to be operated by a person and can not ignore ambient noise in the case of voice. In this paper, we propose an economical attitude information acquisition method to accurately acquire the posture information of the arm in real time under the assumption that the surround drones or robots can be controlled wirelessly with the posture information of the arm. For this purpose, the extended Kalman filter was used to eliminate the noise of the arm position information. in order to detect the arm movement, a low cost MEMS type sensor was applied to secure the economical efficiency of the apparatus. To increase the wear ability of the arm, We developed a compact and lightweight attitude information acquisition system by integrating all functions into one chip as much as possible. As a result, the real-time performance of 1 ms was secured and the extended Kalman filter was applied to acquire the accurate attitude information of the arm with noise removed and display the attitude information of the arm in real time. This provides a basis for generating commands using real-time attitude information of the arm.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.75-79
• /
• 2014

The aim of this retrospective research was to investigate the influence of the patient's arm position on radiation dose and scanning during CT. Chest CT image created image degradation, artifact and overdose to the patient due to the difference of the chest thickness. Therefore, the patient's arm should up position during the CT chest examination. In 2012, 1,642 patients underwent chest CT examination in Seoul K hospital. 118 chest CT examination performed hands down position. The average DLP value of the CT chest arm up examination was 275 $mGy{\cdot}cm$. The average DLP value of the CT chest arm down examination was 312.46 $mGy{\cdot}cm$. In the retrospective study with same patient, The average DLP value of the CT chest examination arm up vigorously was 267.5 $mGy{\cdot}cm$. The average DLP value of the CT chest arm down examination was 307.5 $mGy{\cdot}cm$. Chest CT scan without raising arm created linear artifact due to the lack of X-ray photons which is the thickest part of the human body of shoulder area. In conclusion, arm positioning patients' arms above the shoulders at CT of the chest increases image quality and substantially reduces effective radiation dose.