• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.147-158
• /
• 2004

For stiffened plates composed of composite materials, many researchers have used a finite element method which connected isoparametric plate elements and beam elements. However, the finite element method is difficult to reflect local behavior of stiffener because beam elements are transferred stiffness for nodal point of plate elements, especially the application is limited in case of laminated composite structures. In this paper, for analysis of laminated composite stiffened plates, 3D shell elements for stiffener and plate are employed. Reissner-Mindlin's first order shear deformation theory is considered in this study. But when thickness will be thin, isoparamatric plate bending element based on the theory of Reissner-Mindlin is generated by transverse shear locking. To eliminate the shear locking and virtual zero energy mode, the substitute shear strain field is used. A deflection distribution is investigated for simple supported rectangular and skew stiffened laminated composite plates with arbitrary orientation stiffener as not only variation of slenderness and aspect ratio of the plate but also variation of skew angle of skew stiffened plates.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.227-233
• /
• 1999

Simple equations which can predict "exact" values of the natural frequency of vibration for the special orthotropic laminates are presented. Many laminates with certain orientations have decreasing values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}=D_{26}{\rightarrow}0$, including the laminates with anti-symmetric configurations can be solved by the same equation for the special orthotropic laminates. If the quasi-isotropic constants are used, the equations for the isotropic plates can be used. Use of some coefficients cab produce "exact" value for laminates with such configurations. Natural frequencies of the plate with varying aspect ratios is presented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.114-120
• /
• 2018

Recently, the plate girder bridge is offen designed a temporary bridge for underground roadway construction have not interrupt railroad operation. The integral support plate girder bridge which have longitudinal girder and cross-girder is improved workability and reduction cost and of construction time. The cross beam of the integral support plate girder bridge has a normal box shape to distribute load on the main girde to end both side girder. In this study, On the change to the web distance of the cross box shows characteristics of related to the stresses and displacements on the flange and web plate. Afterward, the various analysis contributed to the safety improvement of crossbeam of the integral support crossbeam plate girder bridge.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.97-107
• /
• 2003

To obtain a more accurate response from larninated composite structures, the effect of transverse shear deformation, transverse normal strain/stress, and nonlinear variation of in-plane displacements vis-$\\grave{a}$-vis the thickness coordinate should be considered in the analysis. The improved higher-order theory was used to determine the critical buckling load and natural frequencies of laminated composite structures. Solutions of simply supported laminated composite plates and sandwiches were obtained in closed form using Navier's technique, with the results compared with calculated results using the first order and other higher-order theories. Numerical results were presented for fiber-reinforced laminates, which show the effects of ply orientation, number of layers, side-toithickness ratio, and aspects ratio.

• Journal of Power System Engineering
• /
• v.13 no.2
• /
• pp.49-55
• /
• 2009

Recently, a study on condensers for refrigerators has focused on new model which will cost less and will be more efficient. Some widely used condensers for domestic refrigerators are wire-and-tube type condenser, hot-wall type condenser, and spiral type condenser. Some companies which use the spiral type condenser at the moment try to develop a new tube-and-plate type condenser which will cost less and will be as efficient as the spiral type. As a standard condenser type, tube-and-plate type condenser is used in this study. A two-dimensional numerical model for the tube-and-plate type condenser is proposed, and the flow and heat transfer characteristics for several types of condensers are investigated.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.118-122
• /
• 2002

A numerical study using linear finite element analysis is performed to investigate the behavior of basement wall subject to soil and water pressure. Currently, structural design of basement wall is based on the assumption for boundary condition of plate, which may lead to the erroneous results. In this study, parametric studies are performed to investigate the variation of moment and shear force according to column-to-wall stiffness ratios and aspect ratios. Scaled factors applicable to the design of basement wall are proposed with the illustration of desist examples.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.53.1-53.1
• /
• 2014

본 연구에서는 고궤도 및 원거리 우주물체의 추적 및 관측이 용이한 광학관측 시스템을 이용하여 정지궤도위성을 관측하였고, 광도곡선 분석을 통해 식별정보를 획득하였다. 정지궤도 위성은 자세에어 방법에 따라 회전 안정화 위성과 3축 안정화 위성으로 나뉘며, 3축 안정화 위성은 다시 통신위성과 지구관측 위성 등으로 나뉜다. 회전 안정화 위성의 식별 연구를 위해 중국의 FY-2 위성을 관측대상으로 선정하였고, 3축 안정화 위성의 식별을 위해 한국의 COMS-1 위성을 관측 대상으로 선정하였다. 회전안정화 위성은 Sidereal Tracking Mode로 관측하면 위성의 궤적이 선 모양으로 나타난다. 이때 나타난 궤적의 pixel value 값을 확인하면 일정한 주기로 밝기가 변화 하는 것을 확인할 수 있으며, FFT를 수행하면 위성의 회전율과 회전 주기를 구할 수 있다. 3축 안정화 위성은 Stare Mode로 관측하여 측광하면 광도곡선을 획득할 수 있다. 위성의 형상을 결정하는 본체, 안테나, 태양전지판을 모델링하여 광도곡선 시뮬레이션결과와 비교하면 각각의 형상이 광도곡선에 미치는 영향과 특징을 알 수 있고, 이를 통해 식별정보를 획득할 수 있다. 이상의 분석을 통해 얻은 FY-2위성과 COMS-1 위성의 식별정보를 제시하고 향후 우주물체 식별 연구에 활용하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.404-411
• /
• 2010

Authors conducted a deduction and characteristic calculation of the some parameters using a magnetic equivalent circuit method to verify a basic design result of a rotary-typed small-scaled linear induction motor for a railway transit. In a LIM, it is possible to express the parameters of the magnetic equivalent circuit into a function of the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. It means that the LIM properties can be changed considerably by the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. So, authors analyzed a tendency of changes of the magnetic equivalent circuit parameters and the LIM characteristics by changing of the airgap, the thickness of the secondary aluminium plate and the overhang length and shape of a rotary-typed small-scaled LIM, and accomplished a basic research to develop a real-scaled LIM for a railway transit.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.143-149
• /
• 2024

We analyze the effect of atmospheric fluctuation on laser beam propagation, using a single-phase screen model and a multi-phase screen model. When a laser beam (wavelength 1064 nm, radius 10 mm, collimated by 25.4 mm optics) propagates 3 km, atmospheric fluctuation with structure constant C_n² in the range of 10^-17 to 10^-14 is generated by the single- and multi-phase screen models. The results of short-term and long-term exposures are analyzed in terms of the beam profile, power in the bucket, and beam radius at the receiver plane. The power in the bucket and beam radius increase as the structure constant increases. When the structure constant is less than 2×10^-15, the results of the single- and multi-phase screen models are similar, within a difference of 1.5 %. However, when the structure constant is greater than 2×10^-15, the difference between the two models increases, and the multi-phase screen model is appropriate under this condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.333-336
• /
• 2017

A speaker diaphragm generates a divided vibration. The influence of the break-up mode is sufficient to cause a shape change in the diaphragm. In this paper, is widely used in ultra-thin multi-media devices, including smart phones is the advance guard of the IT sector, the micro-speakers and its target. Micro-speakers are different from general speakers. The plate has structural form and space constraints. In particular, they utilize a closed-type drive space. It is difficult to provide cooling for the auxiliary suspension structure because of the heat generated in the moving coil. The present study considered the relationship between the break-up mode and the heat transfer of the diaphragm. An experiment was conducted in two stages to compare the embodiment of the break-up mode and heat transfer in a certain frequency range. The changes in the heat were determined through measurements and thermal imaging of the break-up mode. The break-up mode tendency of the diaphragm could be rapidly predicted based on the imaging results using the thermal imaging camera. This will help in the optimal design of micro-speakers.