• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.178-179
• /
• 2011

2차 연료 전지용 금속 분리판 중 스테인리스 스틸은 많은 연구가 진행 되어 왔지만, 알루미늄은 거의 연구가 진행되지 않고 있다. 따라서 이번 연구는 반응성 DC 마그네트론 스퍼터링법으로 스테인리스 와 알루미늄 기판에 TiN 박막을 증착한 후, 기판의 종류에 따른 TiN 박막의 물성을 비교 검토하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.359-369
• /
• 2006

This study aims deriving analysis the flow characteristic of kitchen hood system with using 3-D numerical analysis method and improving the system to expel pollutes more efficiently. This system is applied with $k-{\varepsilon}$ turbulent model and using incompressibility viscosity flow range and boundary condition which are related to Bossinesq approximation following density variation in control volume. To understand the flow characteristics of four models, this study only focuses on velocity field, temperature field, and concentration field varying with followings whether separation plate is set or not and the shapes of separation plates. The quantity of air, speed of exhaust fan and temperature and concentration of heating source are concerned as constant values.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.104-113
• /
• 1993

Characteristics of fiber-reinforced thermoplastic sheet depend on the quantity and shape of fibers. During a molding process of composites, the fiber-maxtrix separation and fober orientation are caused by the flow during the molding process. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation-orientation and molding conditions. The correlation between the separation and the orientation have to be clarified for designing the fiber structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scammer. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.42-47
• /
• 2002

가. 작업별 시험결과 1) 마늘쪽 분리·선별작업 o 마늘쪽 분리기는 통마늘을 1 또는 2∼3쪽으로 분리하여 1차 선별하고, 마늘쪽 선별기는 분리된 마늘을 3단계로 선별되며 작업성능은 시간당 60접 이상을 분리 및 선별할 수 있다. o 개발된 마늘쪽 분리기와 선별기는 소형 경량이며 취급조작이 편리한 기종하고 작업성능이 높고 손상률이 적어 '01년도에 60대가 농가 보급되었으며 '02년도에는 확대 보급될 전망이다. 2) 파종작업 o 작업성능은 경운기용 파종기 2시간/10a, 승용관리기용 직립파종기는 1시간/10a으로 능률적이었으며 작업정도와 생육상태가 양호하였다. o 지역별 파종작업 체계 -난지형 마늘 파종은 직립파종을 하며 제주, 남해 등은 마늘을 파종한 후 10-11월 줄기가 자랐을 때 무공비닐을 피복하고 줄기를 유인하며, 무안은 유공비닐을 피복하고 구멍에 마늘의 1/2 또는 2/3만 묻히도록 파종하며 별도의 줄기유인 작업은 하지 않는다. 의성지역의 한지형 마늘은 트랙터로 쇄토정지후 보행관리기로 골을 내고 인력으로 마늘을 놓으면 관리기가 다음 골을 내면서 복토하는 체계이다. 3) 마늘 수확작업 -마늘 수확기는 난지형 마늘 수확에는 효과가 적으나, 한지형과 같이 깊게 파종하여 인력으로 뽑기 어려운 재배지역에서는 필요한 기종이며, 토양수분이 많으면 굴취된 마늘과 혼이 진동판에 걸려 작업상태가 불량하므로 마늘과 흙의 이송이 원활토록 진동판 형상 및 적정 진폭 구명이 요구됨 4) 마늘줄기 절단작업 -난지형 마늘은 포장에서 건조후 단기간(1-2주)내에 줄기절단을 해야하므로 기계환가 시급하나 한지형 마늘은 아직도 대부분 줄기를 자르지 않고 묶어서 판매하고 있어 기계화의 시급도는 떨어짐 5) 마늘 선별작업 -마늘선별기는 작업성능이 높고 5등급으로 균일 선별되었으며 손상도 없었으나, 기계가 크고 무거워 이동이 곤란하고 가격이 비싸므로 선별등급을 3∼4단계로 줄이고 소형 농가보급형으로 개량제작이 요구됨. 나. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음.

• Korean Journal of Cognitive Science
• /
• v.12 no.4
• /
• pp.41-47
• /
• 2001

Palmer and Rock (1994) proposed that a connected region of uniform visual properties (uniform connectedness) strongly tends to be organized as a single perceptual unit To test this hypothesis using briefly presented forms three experiments were executed. In Experiment 1 and 2 participants were asked to report the identity of a post-cued target. and there was no difference between connected and disconnected displays. In Experiment 3 participants were asked to report the predesignated name of each whole display and the accuracy rate was higher in the connected displays than in the disconnected ones. However negative repetition effects were observed consistently in all the experiments. This indicates uniform connectedness does not have a strong effect in perceiving briefly presented forms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.416-421
• /
• 2008

This paper realizes a system that recognizes traffic safety signs by applying the principle used for game in reverse. The game used for this paper is one that expresses the shape of temporary objects intended by the maker when the maker sees the numerical image provided on (x, y) coordinates and then expresses it on the mesh. After separating the traffic safety sign image from the input image, the system is realized by outputting the content of the sign into letters by recognizing the forms and colors constituting the sign using the puzzle game above. Our system has fast process time and better rate of recognition than the existing system with black-and-white image processing and recognition without any penciling progress.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.49-56
• /
• 2012

Rupture disks are a kind of safety device in high pressure equipment and they are used to control rupture pressure in the solid rocket motor. In this paper, a series of rupture experiments was performed using rupture disks made of AISI 316L and rupture pressure of rupture disks was calculated through various assumptions in relation between elasto-plastic material properties and true stress-strain curve. Experiment and FEA indicated rupture pressure is determined by size of rupture disks. As a result of elasto-plastic analysis, only multi-linear stress-strain curve was able to calculate meaningful estimations. Experimental results also showed rupture location are decided by the size of rupture disks. Experimental and FEA results will be applied to control rupture pressure of disks.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.944-951
• /
• 1988

Global-Local Laminate Variational Model is utilized to investigate the characteristics of interlaminar stresses in thick composite laminates under uniform axial extension. Various laminates with different fiber orientation and stacking sequences are analyzed to observe the behavior of interlaminar normal stresses. From this result, the interlaminar normal stress distribution along the laminate interfaces is examined and discussed with an existing approximation model. The repeated stacking of Poisson's ratio symmetric sublaminates is found to be the best stacking method of thick composite laminates to reduce the interlaminar normal stresses for the prevention of the free-edge delamination.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1095-1099
• /
• 2009

• 한국전기화학회:학술대회논문집
• /
• 2002.10a
• /
• pp.64-64
• /
• 2002