• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.154-168
• /
• 2021

Various types of wooden relics are being unearthed following the full-scale excavation in Wolseong palace site, Gyeongju in Korea. In particular, a large number of relics were found in the moat surrounding the Wolseong Fortress. This study attempted to secure basic data on the shields of the Silla era through species identification, radiocarbon dating, and shape analysis of the two wooden shields excavated from the Wolseong moat. As a result of the radiocarbon dating, it was confirmed that the shields were made of wood procured in the period between the mid-4th century and the early 5th century. The species identification confirmed that the body of the relic was made with Pinus soft pine group and the handle with Zelkova serrata. It was also confirmed that the excavated wooden shield was made by first marking a thin line on a flat grain board, then marking double concentric circles and perforating small holes. The distance between the division lines is constant at about 6cm, and spaces between them are colored in red and black. The shape analysis estimated that two artifacts were more than 50cm and 36cm in width, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.31-37
• /
• 2003

Flat-sawn 32 mm-thick boards of Populus alba×P. glandulosa, one of major plantation species in this country, were dried in conventional, high-temperature and microwave-vacuum (MW/V) kilns. The average green specific gravity of the specimens used in this study was 0.349±0.074. Their average green moisture contents of heartwoods and sapwoods were around 200% and 100%, respectively. From green to oven-dry they shrunk 2.4 and 7.3% in radial and tangential directions, respectively, and there was no discrepancy between heartwoods and sapwoods. It took 65, 35 and 22 hours to dry from green to 10% moisture content in conventional, high-temperature and MW/V kilns, respectively. A colorimetry study showed that the surface color of the specimens dried in a MW/V kiln was clearer and lighter than those in other kilns.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 1992

This study was performed to investigate the hardness of wood related to the wood surface, sap and heartwood, early and latewood, specific gravity, annual ring width and moisture content on major Korean tree species such as Pinus koraiensis, Abies holophylla, Larix leptolepis and Quercus valiabilis. The results were summarized as follows: 1. The arithmetic mean values of wood hardness on cross section were respectively $8.0kg/mm^2$ on Quercus valiabilis, $7.4kg/mm^2$ on Larix leptolepis, $5.1kg/mm^2$ on Pinus koraiensis and $4.7kg/mm^2$ on Abies hollophylla. 2. Generally hardness of wood on cross section was greater than the others and the proportion of cross section hardness to radial was respectively 2.8 on Quercus valiabilis, 2.6 on Larix leptolepis, 3.8 on Pinus koraiensis, and 4.1 on Abies holophylla and that proportion was tend to be decrease as specific gravity increased. 3. It was recognized that the hardness of sap and heartwood was different from each of the tree species and generally heartwood hardness was somewhat greater than sapwood. 4. Generally latewood hardness with in a ring was greater than earlywood and the proportion of earlywood hardness to latewood decreased as specific gravity increased. 5. The relations between hardness of wood and specific gravity show a high positive correlation on all sample tree species. 6. The values of hardness decreased with increasing annual ring width. 7. Hardness of wood on Abies holophylla was greatest in oven dried wood and it was decreased as moisture content increased, but not changed with moisture content abve F.S.P.. The proportion of oven dried wood hardness to green are respectively 3.0 on cross, 2.4 on radial and 1.9 on tangential section.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.1-12
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Liriodendron tulipifera, Betula costata, Paulownia coreana were examined on sorption property, thermal property, electric property, acoustic property. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 80 mesh wood powder and resulted in their EMC's and sorption isotherms. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter-and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and acoustic properties of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.1-10
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus koraiensis and Larix kaempferi were two of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMCs and sorption isotherms at various RH conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences in the thermal and electric properties between quarter- and flat-sawn specimens were observed, which were partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and acoustic properties of wood.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.126-137
• /
• 2014

Characteristics of heating and drying of Canadian-imported Douglas-fir timber using microwave in order to secure convenience and quality of drying timber and to get basic data for secondary conservation treatment are as follows: As the results of analysis of change curves of internal temperature of the timber after irradiating it, round timber and board timber showed stable heat distribution, heat consumption and surface water-content in heating with 30kW for 30 minutes and 120 minutes and with 40kW for 3 minutes and 9 minutes, respectively. Especially, surface water-content distribution according to heating by microwave showed very even leveling and water-content decrease rate was also more 30% compared to its weight showing excellent dry efficiency. And in case of soaking timbers into liquid chemicals for secondary conservation according to the analysis results of heat consumption, it is expected that large amount of preservative will be permeated. Therefore, timber heated by microwave is remarkably available for using industrial materials and developing secondary utilized products with its fast water-content decrease and dryness and higher heat consumption.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.70-84
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus densiflora was one of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMC's and sorption isotherms at various heating conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter- and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and nondestructive testing wood.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.38-53
• /
• 2022

In this article, I have summarized and reviewed the concepts and terms surrounding the stamped construction technique, focusing on earthen walls in the Three Kingdoms period. This is because confusion is caused by defining the nature of the earthen walls by using various concepts and terms for each researcher regarding the substance and construction method of the earthen walls. The stamped earth method is a representative ancient civil engineering or construction technique in which a frame is made of plates to form a fortress wall, a fence, and the base of a building, and then soil or sand is poured into it layer by layer and then stamped with a bat to make it solid. Therefore, in order to prove that the earthen wall was built by the stamped earth method, evidence such as a narrow plate, a column for fixing it, long horizontal and vertical wood pieces to support the narrow plate, and traces of pounding the soil must be detected. However, in Korea, there are very few cases where such evidence has been fully excavated, so it is necessary to agree on how strictly the standards for the stamped earth method will be applied. The terms related to the stamped technique mobilized for the construction of the earthen walls were explained with actual examples by dividing the terms related to the concept into terms related to the principle and unit of the stamped plate, and the specific stamped technology. In particular, in Pungnabtoseong Earthen wall, a variety of typical and diverse methods of building the ancient stamped earthen wall were identified so that decisive data could be secured to understand the principles and techniques of the stamped earthen wall. In the future, a more general understanding of the stamped technique will be possible only when more evidence related to it is found in relics other than Pungnabtoseong Earthen wall.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.8-19
• /
• 1989

The proportion of imported wood has been now over 80% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. But these trials were practically restricted by several disadvantages of domestic species. such as a small diameter, variety of species, and irregularity of wood physical or chemical characteristics, etc. From a this point of view, this study was carried out to investigate solid wood bending properties of sample trees and then to develop their end uses. The species of sample trees were Pinus densiflora S. et Z., Pinus rigida Mill., and Larix leptolepis Gord. which have large growing stocks but Pinus rigida and Larix leptolepis have not been used well because of their poor qualities. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Pinus densiflora, Pinus rigida, and Larix leptolepis are showed in Table 6. 2. The minimum solid-bending radii of Pinus densifjora, Pinus rigida, and Larix ieptolepls were 260mm, 240mm, and 300mm, respectively in steaming treatment.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.3-7
• /
• 1968

The Capacity of wood to absorb water is very important as the basis data for wood industry, particularly in preservatives impregnation, manufacturing of improved wood, selection of packing boards, etc. In this study differences in Water absorbing Capacity of wood by structual section, water soaking time were investigated. (1) The species used in this investigation were Larix olgensis Henry Var. Koreana Nakai and Juglans mandshurica Max., and dimension of these testing wood block was $30{\times}30{\times}100cm$; and these were soaked in fresh water of $25{\pm}1^{\circ}C$ for 8.5day and 0.5 day, before measurement. (2) The result showed that the water absorption by cross sections was greater than by either radial or tangential section and there were no differences between radial and tangential section. (3) The water absorption of Juglans mandshurica Max. which has the relatively low specific gravity was greater than Larix olgensis Henry Var. Koreana Nakai which has generally high specific gravity. (4) The result showed an increase in the absorbed water with increase in the length of soaking time. However the water absorption rate during the early period of soaking was very high and thereafter the rate decreased with passage of time. More than a half of the total water absorption was achieved during the first 2 days approximately. (5) The relationships between the length of the soaking-time and water absorption were found to be as follows : Larix olgensis Henry Var. Koreana Nakai Cross section : $y=111.1{\times}^{0.6516}$ radial section : $y=32.2{\times}^{0.5146}$ tangential section : $y=36.5{\times}^{0.5112}$ Juglans mandshurica Max. Cross section : $y=216.1{\times}^{0.5914}$ radial section : $y=27.9{\times}^{0.5832}$ tangential section : $y=50.9{\times}^{0.4769}$ Where : y is amount of water absorption ($mg/cm^2$) x is water-soaking time (days).