• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.286-292
• /
• 2021

Dispersion maps of antipodal symmetric type for improvement of compensation effect in dispersion managed link combined with optical phase conjugation, which can compensate for the distorted wavelength division multiplexed (WDM) signals due to chromatic dispersion and nonlinear Kerr effects of single-mode fiber, were proposed. It was confirmed that the proposed all of antipodal symmetric dispersion maps was more effective to compensate for the distorted WDM channels than the conventional link of uniform type dispersion map. Especially, dispersion maps formed like the inversion of alphabet S were more advantageous as the distorted WDM channels were compensated than dispersion maps formed like alphabet S. It was expected that the variety of optical network topology was more expanded by applying the proposed antipodal symmetric dispersion maps into transmission link.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.172-173
• /
• 2001

다중 광접속 방법 중 CDMA는 많은 수의 주소(개별 사용자를 위한 채널)를 제공하고 광 패킷 전송 방법에 있어서는 패킷들의 충돌을 피하기 위한 복잡한 장치를 필요로 하지 않는다는 장점을 가지고 있다. LED와 같은 Incoherent 광원을 이용하는 광 CDMA를 위한 여러 가지 광 코드와 암호화 방식이 제안되어 왔으며, 파장/시간 이차원 광 코드를 이용하는 방식은 AWG mux/demux 또는 AWG 라우터를 이용하여 광 코드가 용이하게 구현될 수 있음이 보고된 바 있다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.842-849
• /
• 2000

In this paper, We analyzed the protocol to improve the performance of the multicast traffic processing in WDM networks. In the protocol, control channels are devided into contention-less minislots and contention minislots. And the packets which fail to have successful reservation in the present time slot have priority to have successful reservation in the contention-less minislots of the next time slot. Therefore, control channel contentions and destination conflicts can be reduced with the use of contention-less minislots. For the multicast traffic processing, the theoretical analysis and computer simulation are important to estimate the network performance and to calculate the optimized number of contention-less minislots. In this paper, the state transition probability of the number of contention-less minislots and arrival packets are calculated using 4-dimension matrix. The maximum number of contention-less minislots is equal to the number of channels for maximum performance improvement of the system. It is theoretical analysis and prove to computer simulation the performance of the protocol.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.127-129
• /
• 2002

ADSL, Metro Ethernet등 가입자에게 넓은 대역폭을 할당하는 기술이 서비스 영역에 적용되고 있음에 따라 이를 원활히 수용할 수 있는 초고속 대용량 기간망 구축기술이 필요하다. 현재 사용되는 기술로는 2.5Gbps 또는 10Gbps의 전송속도를 갖는 수 십 채널을 각각 파장이 다른 광반송파(optical carrier)에 실어 광학적으로 다중화한 뒤 한 가닥의 광섬유를 통해 전송시키는 파장분할 다중화(Wavelength Division Multiplexing: WDM) 기술이 있다. 본 논문에서는 채널 당 전송 속도를 40Gbps로 증가시키거나, 증폭기 이득 대역폭을 확장시켜 채널 수를 증가시켜 수 THz의 전송용량을 수 천 km 전송시키는데 필요한 라만 광증폭기 기술, FEC 기술, 변조포맷, 분산관리(Dispersion management)기술 등의 핵심기술을 소개한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1747-1753
• /
• 2013

Signal performances according link span dispersion compensation conditions at the 2000 km long-haul transmission distance using 10 Gbps 40 wavelength division multiplexing channels were analyzed and compared. 95%, 97.5%, 100%, 102.5% and 105% compensation conditions were applied and 97.5% gave the best performance without post dispersion compensation. the effects of accumulated dispersion value and average dispersion value per transmission link for each link compensation condition were analyzed. When post dispersion compensation optimization was applied to five link span dispersion compensation conditions, 102.5% was given the best performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.27-33
• /
• 2001

The performance of the ordinary Fiber Bragg Grating(FBG) sensor strain measurement system, which uses Fabry-Perot filter for scanning wavelength, has limitation for application because of hysteresis characteristics of PZT element in the filter, slow scan rate of the filter and the high cost of system. We proposed and experimented a multiple FBG sensor system using light emitting diode(LED) as a light source and adapting Code Division Multiplexing(CDM) method to separating out individual sensor signal. Output signals for a applied static and dynamic strain and crosstalk levels between sensor signals were measured. The price of the system is very loss and the response speed is very fast. Crosstalk levels between sensor signals below - 30 dB were demonstrated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.579-585
• /
• 2006

In this study, we analysis an optical receivers using the optical preamplifier in a spectrum-sliced WDM systems. The average numbers of photons/bit, for an $10^{-9}$ error probability, counts using the OOK and FSK transmission. As a result, the theoretical sensitivity for PIN receiver and optical preamplifier receiver are approximately $9.2\times10^4\;and\;7.2\times10^2$ in the m=20, respectively. Also, the average numbers of photons/bit, for and given error probability, theoretical receiver sensitivity for Gaussian method and k-square method are approximately $9\times10^2\;and\;2.16\times10^2$ in the m=40, respectively. And the average numbers of photons/bit, for an given error probability, theoretical receiver sensitivity, OOK and FSK transmission are approximately $1.9\times10^2\;and\;3.1\times10^2$ in the m=20, respectively.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.68-72
• /
• 1997

Using one of the absorption lines of $^{13}C_2H_2$ molecules near the zero dispersion wavelength(1549.49nm) of dispersion shifted fiber, we stabilized center frequency of an optical fiber Fabry-Perot filter. The free spectral range of the filter is 100 GHz for 100 GHz channel allocation. For equi-spaced three channel multiplexing, channel locking of three DFB-LDs to transmission peaks of the fiber Fabry-Perot filter was tried. To investigate the effect of dithering current applied to each DFB-LD, the change of DFB-LD linewidth was measured.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2003

In arrayed waveguide grating (AWG) devices whose waveguides were composed of polymer with negative thermo-optic coefficient as overcladding, and silica with positive thermo-optic coefficient as both core and undercladding, we investigated the temperature dependence of the central wavelength using two-dimensional SFDM. From these results, it was confirmed that the temperature dependence can be nearly eliminated by adjusting the refractive index of the cladding and the thickness of the silica thin film upper-loaded on the core. Based on the numerical calculations, the AWG device with polymer overcladding was fabricated. and its optical characteristics were compared with those of the orginal silica AWG device. The introduction of polymer overcladding decreased the temperature dependence of the central wavelength from 0.0130 nm/$^{\circ}C$ to 0.0028 nm/$^{\circ}C$ without deteriorating the insertion loss and crosstalk characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1666-1671
• /
• 2022

The structure of a high-power gain-flattened long wavelength band (L-band) optical amplifier was optimized, which was implemented for 64-channel wavelength division multiplexed optical signals with a channel spacing of 50 GHz. The output characteristics of this L-band amplifier were measured and analyzed. The amplifier of the optimized two-stage amplification configuration had a flattened gain of 20 dB within 1 dB deviation between 1570 and 1600 nm for -2 dBm input power condition. The noise figure under this condition was minimized to within 6 dB in the amplification bandwidth. The gain flattening was realized by considering only the characteristics of gain medium in the amplifier without using additional optical or electrical devices. The proposed amplifier consisted of two stages of amplification stages, each of which was based on the erbium-doped fiber amplifier (EDFA) structure. The erbium-doped fiber length and pumping structures in each stage of the amplifier were optimized through experiments.