• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

Crypto-systems have difficulties in designing hardware due to the various standards. We propose a programmable and configurable architecture for cryptography coprocessors to accommodate various crypto-systems. The proposed architecture has a 32 bit I/O interface and internal bus width, and consists of a programmable finite field arithmetic unit, an input/output unit, a register file, and a control unit. The crypto-system is determined by the micro-codes in memory of the control unit, and is configured by programming the micro-codes. The coprocessor has a modular structure so that the arithmetic unit can be replaced if a substitute has an appropriate 32 bit I/O interface. It can be used in many crypto-systems by re-programming the micro-codes for corresponding crypto-system or by replacing operation units. We implement an elliptic curve crypto-processor using the proposed architecture and compare it with other crypto-processors

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.965-973
• /
• 2007

We analyzed that the loss of data in TCP protocol based wireless networks caused by overlapped responses in bi-directional nodes that were resulted in out of the data sequence. This loss can be prevented by using revised TCP rate control algorithm and the performance of throughput can also be improved. The rate control algorithm is applied when the congestion happens between nodes while traffic packets are retransmitting in TCP bandwidth. In addition to applying the rate control algorithm, we determine the number of system clients in bandwidth and the average of pausing time between transmitting serial files to produce a competitive level so that an efficient performance of rapid retransmitting for the loss of multi-packets. This paper discusses the improvement of congestion control in that the decrease of the loss, firstly, as ensuring an efficient connection rate and, secondly, as using sliding window flow control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.464-470
• /
• 2013

These days, with increasing interest about the health care, research about standard for transmitting/receiving data of health device has been actively conducted. Standardization and testing / certification is underway through the IEEE 11073 PHD, Health Level Seven and the Continua Health Alliance, it'll continue to be more research and experiments in the future. In this paper, we introduce the IEEE 11073 PHD standards for exchange of remote health information and the Bluetooth Health Device Profile(HDP) for health device profile of the Bluetooth technology, also we conducted experiments about exchange health information between health device and smart device which are adapted the IEEE 11073 PHD and Bluetooth HDP. Transmitting/receiving of the IEEE 11073 PHD standard protocol using the Bluetooth HDP profile between health device and smart device can be known by this experiment, and it expect to implement variety of remote medical services through health device supporting these standards in future.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.55-63
• /
• 2014

In this paper, we introduce the performance evaluation of data archive system for saving correlation result of Daejeon correlator with high-data rate. Daejeon correlator supports various correlation modes, but the speed of correlation result is affected by correlator according to the integration time in each mode. Maximum data rate of Daejeon correlator is 1.4GB/s in case of C1 mode with 25.6ms integration time. In this research, the performance evaluation of the proposed data archive system is conducted for saving correlation results connected with 4 10GbE optical cable with VCS (VLBI Correlation Subsystem), which is the core system of Daejeon correlator. For the experiments, the data archive system for 2 benders was selected and benchmark test was performed. In this paper, the developed data generation program of VCS correlation result file for benchmark test and evaluation results are described.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.493-498
• /
• 2009

Bluetooth is a popular wireless data transmission method with low power consumption, but it has low data transmission rate. Thus, although many video stream players of a local or network file exist, there have been few players of video stream transmitted via Bluetooth. MPEG-4 AVC/H.264 codec is one of video codecs available with best compression rates for a certain quality, so a H.264 encoder seems to be adequate for video stream to be transmitted via Bluetooth. In this paper, we present a DirectShow filter based player of video stream encoded by H.264 codec, which is transmitted via Bluetooth. Details on the design and implementation of this program are described. Experimental results are shown to demonstrate the validity of the implemented program using various video samples.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.507-515
• /
• 1999

통신 기술의 발달로 인하여 고정망 뿐만 아니라 이동망에서도 지능망 서비스를 제공하는 것이 중요하게 생각되고 이에 대한 많은 연구가 진행중이다. 이 논문은 이동망에서의 지능망 서비스를 효율적으로 제공하기 위한 네트워크 모델을 제안한다. 제안하는 모델에서는 MSC/SSP와 SCP/HLR 사이의 두 가지 신호 구조를 고려한다. 이러한 모델에서 지능망 서비스를 제공하는 것이 효율적임을 보이기 위하여 먼저 VLR을 사용한 지능망 서비스의 제공 방안을 제시한 후, 두 가지 모델에서의 지능망 서비스 관리에 관한 성능을 분석해 보고자 한다. 이러한 방법은 SCP에 저장된 지능망 서비스 프로파일들을 VLR로 다운로드 하여 사용자로부터의 지능망 서비스 요청시에 SCP로의 연결을 줄이는 것이다. 제시한 방법은 SCP/HLR의 부하를 감소시켜 지능망 서비스 관리면에서 IMT-2000 보다 훨씬 더 나은 성능을 보인다.Abstract As the communication technology has been developed, it is necessary to provide the IN service in the mobile network as well as the fixed network and many researches are in progress. In this paper we propose the network model to efficiently provide IN service in the mobile network. There are two signaling architectures between MSC/SSP and SCP/HLR. To show that it is efficient to provide the IN service in the proposed model, we propose IN service provision method using VLR and analyze the performance of IN service management in two architectures. These methods are to download the IN service profiles that are saved in SCP to VLR and to decrease the connection to SCP when the user requests the IN service. The proposed methods show that the load of SCP/HLR is decreased and our method is better than IMT-2000 in the aspect of IN service management.

• Journal of Internet Computing and Services
• /
• v.4 no.1
• /
• pp.53-65
• /
• 2003

I/O processing speed of relatively sluggish storage devices incurs overall performance degradation in computer systems. As a solution to improve the situation, SAN(Storage Area Network) has been proposed. In order to utilize a SAN system more effectively, where storage devices are directly connected with a high speed network such as Fibre Channel, a proper management tool is needed. In this paper, we present a design and implementation of a performance monitoring and configuration management tool for the SANtopia system which supports global file sharing in the SAN environment The developed tool is to monitor the performance of the Linux hosts composing the SANtopia system and to manage the configuration of the hosts and storage devices. It also supports GUI(Graphic User Interface) environment using the JAVA programming language.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.593-600
• /
• 2014

OFDMA systems solves frequency selective fading problem and provides improved performance by optimal allocation of subcarriers and transmit power. Two-way relay systems provide improved spectral efficiency compared to that of the conventional half-duplex relay using bidirectional communications. In legacy OFDMA system such as WiBro, two-way DF relay utilization causes pilot re-assignment and impossibility of channel estimation and decoding at relay nodes by self-interference. In this paper, resource allocation schemes for legacy OFDMA systems with two-way DF relay are proposed. The proposed schemes allocate subcarriers considering destinations nodes which are connected to relay nodes as individual nodes which are directly connected to a base station. Subsequently, the proposed schemes compensate bandwidth loss due to orthogonal allocations by overlapped allocating unused subcarriers at other noes. Numerical simulations show that the proposed resource allocation schemes provide improved performance compared with orthogonal allocation.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.253-261
• /
• 2006

In spite of the popularity of P2P technology, a multimedia streaming using the P2P technology has been neglected. The reason for this is that the P2P multimedia streaming has suffered from several inherent problems especially poor bandwidth and unreliable connection among peers. We suggest a Multi-Peer Binding Protocol (MPBP) in this paper that provides a virtual single channel composed of multiple connections to several peers to ease these problems. The protocol enables applications to download data from multiple peers simultaneously, so they can achieve throughput improvement and reliable streaming. For this, the MPBP splits media files into small chunks and provides a mechanism for identifying and transmitting each chunk. Implemented MPBP engine focuses on handling an abrupt disconnection from data sending peers and the evaluation result shows the MPBP is able to handle it gracefully. The MPBP is also desisted to support various media types. To verify this, video and audio applications are implemented using the MPBP engine in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.539-541
• /
• 2016

In this paper, we proposed real time free-length monitoring systems interlocking with the spring free-length sorter which shows the state of production connected to the spring production device. This systems enable the administrator to check the quality or quantity of product and the defect rate, etc., in the remote place. The proposed systems are comprised of the wireless device interlocking with PLC device, the server program, and user GUI program. The wireless device transmits the received data from PLC device to server program using Wi-Fi. Server program represents the data from the wireless device on the screen and insert those data into database. User GUI program shows data stored in database and supports the function which converts the stored data in DB to excel file.