• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.23-35
• /
• 2004

The weathering characteristics of periodically submerged sedimentary rocks in the Sayeon dam, Ulsan was examined by field work, electron probe micro-analysis, X-ray diffraction, and X-ray fluorescence spectrometry. Analysis of fracture zone and exfoliation showed the submerged sedimentary rocks have undergone severe mechanical weathering. Mechanical weathering in the water-rock interface accelerated chemical weathering, such as dissolution and alteration of the most of minerals except for quartz in the weathering zone. The dissolution of carbonates specially calcite, is remarkable creating the cavities, whereas formation of minerals including clay minerals is not active. The sedimentary rocks have been periodically submerged for a certain period of time, and have repeated freezing and thawing. This mechanical weathering favored infiltration, which accelerated mineral dissolution. The high content of easily soluble carbonate of the sedimentary rocks is likely the major cause of intense chemical weathering. The dissolved elements within the infiltrated water interrupted the occurrence of clay and weathering minerals, and expend fractures by infiltrated water accelerated weathering process.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2000

As a part of geophysical studies on segmentation of the Ulsan fault, walkaway refraction seismic data were measured at 17 stations near National Road 7 between Kyungju and Ulsan. Seismic anisotropy was analyzed in the offset range of 1-48 m. The average refraction velocity of 1787 m/s indicates the refractor is the upper boundary of weathered basement. P-wave anisotropy is computed to be 0.056 in average, which may serve as a weak evidence that the strike of major geologic structure coincide with the inferred fault direction. In the south of the province boundary between Kyungsangnam-do and Kyungsangbuk-do, the velocity anisotropy is normal in that P-wave velocity in the strike direction is faster than the one measured in the dip direction. On the contrary, it appears that the fault strikes in many directions or that fractures may be developed better in the dip direction in the northern par. Such a difference in anisotropic pattern is believed to be a seismic evidence indicating that a segmentation boundary of the Ulsan fault locates near the province boundary.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.347-353
• /
• 2005

The geology of the Tumbang Lapan area consists of Permian to Carboniferous metamorphic rocks, Cretaceous granitic rocks, and Permian to Tertiary sedimentary and volcanic rocks. Three faults are developed in surveyed area, and are functioned as channels of the hydrothermal solution which farmed quartz veins within tuff3. In the mineralized area, argillic and propylitic alterations are dominant. Argillic altered rocks show the alteration mineral assemblages of kaolinte+sericite+quartz+chlorite+pyrite. Mineral association in propylitic alteration is chlorite+epidote+feldspar+quartz+pyrite+ magnetite. Vein type, fracture filling, stockwork are observed in survey area. As a result of analysis of samples from quartz veins and altered rocks, some mineralized rocks showed $0.01\~4.6g/t$ of gold.

• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.7-20
• /
• 2009

In this study, 5 steps of different delay intervals are applied to a plasma rock-breaking machine that is driven by electric shocks in order to improve the workability of the traditional single-shot type plasma rock-breaking operation. The sequential steps use the electrolyte volume per delay of 1, 2, 3, 4, 5 kg and it has been analyzed to measure the delay time and level of the ground vibration and noise according to exploding. The delay time of the rock-breaking machine by an electric shock of 5 steps has used about 40~50ms at the electrolyte connected from 1 to 3 holes, about 70~80ms at the electrolyte connected from 4 to 5 holes. It is identified that the extents of the ground vibration is low to 1 over 3~6 compared with that of the emulsion explosives.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.21-36
• /
• 1999

Recently resistivity survey is widely used for site investigations in the field of civil engineering. Since such application area requires accurate interpretation tools especially in the area of complicated geology and rough terrain topography, we developed a three-dimensional (3-D) resistivity inversion code, which can reconstruct real earth structures. Furthermore, the inversion code gives resolution-enhanced images by applying the ACB(Active Constraint Balancing) method. With the help of this inversion code, 3-D resistivity survey is now used as new techniques for site investigations in civil engineering problem. By imaging the 3-D resistivity distribution, we could get useful informations such as depth distribution of basement rock, distribution of weak zone, fractures and cavities which is crucial to civil engineers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.207-212
• /
• 2011

A hydraulic breaker is an attachment installed at the end of excavator arm and is used for breaking. As per the authors' knowledge, there have been no research results on reducing the weight of the hydraulic breaker even though this weight reduction is very important for improving the performance of the excavator. In this study, we minimize the weight of the housing of the hydraulic breaker under normal operating conditions, while the maximum stress of the housing is lower than the allowable stress. A meta-model, which is generated by using the CAE results for the sampling design points determined by an orthogonal array, is used to solve the minimization problem. The weight of the housing according to the optimal design is found to be lower than the original weight by 4.8% while satisfying the constraint on the maximum stress.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.121.2-121.2
• /
• 2010

제주도는 지질학적으로 제4기에 형성된 화산섬으로 지금까지 고온의 지열징후는 보고된 바 없으나, 남한에서 가장 최근까지 화산활동이 있었던 것으로 기록되어 있어 화산활동과 관련된 심부 지열자원 부존 가능성은 아직 열려있다고 할 수 있다. 본 연구에서는 제주도에서 지열부존 가능성을 타진하고 제주도 심부 지질구조 파악을 목적으로 2차원 및 3차원 자기지전류 (MT) 탐사를 수행하였다. 탐사는 중산간지역에서 한라산을 중심으로 동, 서, 남, 북의 4방향 4측선과 제주 서부지역에 남북방향의 1측선을의 총 5개 측선에 대해 수행하였으며, 이에 대한 MT 탐사자료의 2차원 및 3차원 역산을 통하여 한라산 하부 및 주변의 심부 지질구조를 파악하고자 하였다. 역산 해석 결과는 천부 구조는 기존 시추조사 결과 밝혀진 층서구조의 형태를 잘 나타내어 획득된 자료의 신뢰도가 높음을 지시하였다. 즉, 제주도 최 상부를 피복하고 있는 현무암 등의 화산암류는 고비저항(수백 ohm-m)으로, 그 하부의 해성 미고결퇴적층(U층 및 서귀포층)은 저비저항으로, 그리고 최하부의 응회암이나 화강암으로 구성된 기반암은 1,000 ohm-m 이상의 고비저항 층으로 잘 구분되어 나타났다. 특히, 제주도에서 특징적으로 해수면 하부 수십 ~ 수백 m에 존재하는 것으로 알려진 미고결퇴적층이 10 ohm-m 내외로 측선 전반에 걸쳐 나타났다. 이는 기존의 시추결과에서 미고결 퇴적층이 제주도 전역에 걸쳐 해수면 하부 100 m 내외의 심도에서 관찰되는 것과 일치하는 결과이다. 기반암 하부에서는 특징적으로 모든 측선의 중앙부에서 저비저항 이상대가 영상화되었으며 이는 2차원 역산과 3차원 역산해석에서 공통적으로 나타났다. 특히, 3차원 해석에서는 이러한 저비저항 이상대가 한라산 정상에서 서북쪽 부근에 나타나는데 이는 과거의 화산활동과 관련된 지질학적인 구조에 의한 영향일 가능성과 측선의 양단과 중앙에서 주변 바다의 영향이 다르게 나타나기 때문일 가능성으로 볼 수 있다. 즉, 전자는 심부에 발단된 각각의 파쇄대가 모든 측선의 중앙부에서 교차하거나 이를 통한 한라산의 생성과정과 연관된 지질학적인 구조일 가능성을 의미한다. 만약 한라산을 형성한 화성활동의 영향이 아직 지하 심부에 남아있다면 지열수의 부존 혹은 마그마의 통로가 되었을 단층의 영향으로 한라산 하부에 저비저항 이상대로 나타날 가능성이 높다. 그러나 후자에 의한 가능성도 배제할 수는 없으므로 향후 주변바다에 대한 영향을 고려한 3차원 역산해석이나 심부시추 등을 통한 상세한 지질조사 등 추가적인 연구가 이루어져야 할 것으로 판단된다.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.269-281
• /
• 1994

Microscopic study and X-ray diffraction analysis were carried out to find out rock type, tock forming minerals; and weathering characteristics of rocks at the constructing site of the churyong Tunnel, Kyongju-Gun, Kyongbuk. Seismic velocity and compressional strength were measured to evaluate mechanical properties of rock. The rock of the study area is Jurassic tuff consisting of clay minerals, crystals of quartz and feldspar, fragments of volcanic rocks and shale. Fresh tuff has compressional strength of about $443kg/\textrm{cm}^2$ and seismic velocity of about 3680m/sec in average. It is classified as soft rock. Rock fragment within tuff is andesite and it has compressional strength of about $2500kg/\textrm{cm}^2$ and seismic velocity of about 4340m/sec in average. It is classified as hard rock. A good linear relationship is found between compressional streangth and seismic velocity in both laboratory sample and in-situ rocks. Laboratory samples has seismic velocities faster about 1.5km/sec than those in-situ rocks. It is interpreted that joints, fractures, and water content in the in-situ rocks result in decreas of seismic velocity. As Tuff has more than 50% of clay minerals in matrix and shale fragments, it absorbs water easily in atmospheric condition. Therefore, though the rock in the study area is medium hard rock before weathering, it is weathered very easily in the case of exposure to natural environment, comparing with other rock.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.289-302
• /
• 2020

To determine the shallow subsurface structure and sliding surface of land creeping in 2016 at Hadong-gun, Gyeongsangnam-do, geophysical surveys (electric resistivity, and refraction seismic methods, borehole televiewer) and slope stability analysis were conducted. The subsurface structure delineated with borehole lithologies and seismic velocity structures provided the information that the sediment layer on the top of the slope was rather as thick as 20 m and the underlying weathered rock (anorthosite) was thinner than 1 m. Based on the tension cracks observed during the geological mapping, televiewer scanning was performed at the borehole BH-2 and detected the intensive fracture zones at the ground-water level, associated with the slip weak zones mapped in dipole-dipole electrical resistivity section. Downslope sliding and slightly upward pushing at the apex of high resistive bedrock explains the curved slip plane of the land creeping. Such a convex structure might play a role of natural toe abutment for preventing the downward development of slip weak zones. In slope stability analysis, the safety factors of the slip weak zone are calculated with varying the groundwater levels for dry and rainy seasons and the downslope is founded to be unstable with safety factor of 0.89 due to fully saturated material in rainy season.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.37-45
• /
• 2006

Velocity structures were defined in the vicinty of the 140-m deep test borehole in the pungam basin through simultaneous inversion of surface seismic refraction and far-ofset VSP traveltime data. Seismicenergy generated at the surface by a seisgun was recorded both at 42 surface locations at 3-m intervalsalong the profiles in the N20E and its orthogonal directions and at 71 m depth in the borehole. Forthe ofset VSP study, seismic energy was generated by a 5 kg sledgehamer at the surface in the horizontal ofset range of -19.5∼+19.5 m from the borehole. The seismic signals were detected at 9∼99 m depths with 1∼2 m intervals and recorded for 204 ms per shot. After shot static corrections,first-arrival times picked from both the surface refraction and borehole records were simultaneouslyinverted to yield velocity tomograms. The tomograms indicate that a 1.5 m thick soil layer with velocities les than 500 m/s overlies basements having a velocity range of 3,067 ∼5,717 m/s. Within the basements,∼4 m and deeper than 71 m. The high-velocit yzones may be due to conglomerates intercalated with sandstones and siltstones. No evidence for large-scale fracture zones or faults is detected near the borehole