• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.403-415
• /
• 2014

Recently, the temperature rise in the summer due to climate change, power usage is increasing rapidly. As a result, power generation facilities have been newly completed and the need for ultra-high-voltage transmission line for power transmission of electricity to the urban area has increased. The mechanized tunnelling method using a shield TBM have an advantage that it can minimize vibrations transmitted to the ground and ground subsidence as compared with the conventional tunnelling method. Despite the popularity of shield TBM for cable tunnel construction, study on the mechanical behavior of cable tunnel driven by shield TBM is insufficient. Thus, in this study, the effect of fractured zone ahead of tunnel face on the mechanical behavior of the shield TBM cable tunnel is investigated. In addition, it is intended to compare the behavior characteristics of the fractured zone with continuous model and applying the interface elements. Tunnelling with shield TBM is simulated using 3D FEM. According to the change of the direction and magnitude of the fractured zone, Sectional forces such as axial force, shear force and bending moment are monitored and vertical displacement at the ground surface is measured. Based on the stability analysis with the results obtained from the numerical analysis, it is possible to predict fractured zone ahead of the shield TBM and ensure the stability of the tunnel structure.

• Tunnel and Underground Space
• /
• v.16 no.3 s.62
• /
• pp.218-231
• /
• 2006

Anisotropic/heterogeneous rock mass shows various deformation behavior types due to tunnelling because deformation behavior is largely controlled by the spacial characteristics of geological factors such as faults, joints and fractured zone in rock mass. In this paper 2-dimensional numerical analysis on the several influencing factors is performed considering fractured zone located near tunnel. This numerical analysis shows that deformation behavior of tunnel are very different according to the width and the location of fractured zone and supper method. However, 3-dimensional analysis is necessary to consider 3-dimensional geometrical characteristics sufficiently since discontinuity and fractured zone have 3-dimensional geometry. Also flexible design/construction guidelines for tunnelling are required to cope with uncertain ground condition and circumstance for technically safe and economic tunnel construction.

• Explosives and Blasting
• /
• v.42 no.1
• /
• pp.23-33
• /
• 2024

Recently, various techniques and patented methods on blasting operation are being newly developed. In this study, test construction of the MDS blasting method was performed, and the fragmentation size and the occurrence rate of rocks exceeding 300mm were measured and analyzed in comparing to normal blasting method. Test construction was performed three times each for normal and the MDS at the same bench for each round, and fragmentation size(P80) and occurrence rate of rocks exceeding 300mm(S30) were measured using digital image processing. A sieve bucket was also manufactured on-site to sort oversized rock particles from muck piles, and their weights and equivalents were measured to calculate actual values. As a result, the fragmentation size decreased of 21.0% with the MDS compared to normal, and 100-S30 decreased of 10.1%, with actual values decreasing of 7.6%. Although there were variations in blasting effects for each round due to differences in rock quality at site, overall, the MDS proved to be more effective compared to normal blasting method under equivalent conditions.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.276-282
• /
• 2004

Barley flakes were developed by extrusion cooking using broken kernels, by-products of the barley pearling process. Broken kernels from both non-waxy and waxy barley broken kernels were sufficiently gelatinized at the barrel temperature of over $100^{\circ}C$ and the moisture content of broken kernels of over 35%. Cutting and flaking roll separating properties of pellets prepared from non-waxy barley broken kernels were better than those of waxy barley broken kernels. Characteristics of pellets prepared by extrusion cooking in different mixing ratios of non-waxy and waxy barley broken kernels were investigated. As the mixing ratio of waxy barley broken kernels increased, RVA peak viscosity, apparent viscosity, and yield stress of prepared pellets decreased, while flow behavior index increased. As the mixing ratio of waxy barley broken kernels increased, compressive strength and bulk density of deep-fat fried flakes drastically decreased, and the size of air cells on cross-section increased, and thickness of cell-constituting bodies decreased. Sensory evaluation results showed that acceptability for texture and taste of flakes inclosed as the mixing ratio of waxy barley broken kernels increased, and optimum mixing level of waxy barley broken kernels appeared to be 30-40%.

• Explosives and Blasting
• /
• v.19 no.4
• /
• pp.11-22
• /
• 2001

토목공사장에서 암파쇄 작업은 경제성과 안정성에 지대한 영향을 미치는 작업이다. 본 논문은 대전지역에서 수행된 암파쇄 공법 설계 및 시공사례로서, 현장암반의 특성을 고려한 적정발파공법을 선정하기 위하여 대상 지역의 지질현황을 조사·분석하고, 또한 민원이 첨예한 도로개설 공사장에서 시험발파를 실시하여 이를 토대로 암절취 공법을 선정하여 시공한 사례보고이다. 대전지역의 지질은 선캠브리아기의 변성암류와 변성퇴적암류 및 이를 관입한 심성암류와 중생대 화강암으로 이루어져 있는 복잡한 분포를 이루고 있다. 사례연구 대상 현장은 편상구조가 현저한 관입 편상화강암 및 화강암질 편마암으로 구성되어 있었으며, 시험발파 및 분석결과를 기초로하여 25.5m이내 지역은 HRS 등 무진동 파쇄공법의 적용을 제안하였고, 25.5∼36m 범위의 대부분 지역은 진동제어를 할 수 있는 제어발파공법을 권장하였고, 기타 진동 영향권에서 비교적 안전한 것으로 나타난 지역은 소발파공법을 적용하도록 제안하였다. 제안된 안에 따라 설계를 보완하고 시공한 결과 문제의 발생없이 성공적으로 시공이 완료되었다.

• Proceedings of the Korea Forestry Energy Research Society Conference
• /
• 2011.02a
• /
• pp.81-83
• /
• 2011

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.21-29
• /
• 2016

In this study, recycled aggregates crushed from waste concrete were sorted into three groups, 10-13 mm, 13-20 mm, and 20-25 mm. They were treated in different ways and then their crushability was evaluated for each treatment. Coffee waste was used for reducing their pH level. The pH of recycled aggregate was almost 11, regardless of aggregate sizes. The pH of coffee waste was nearly 5 and 10, 30, or 50 g of coffee waste was mixed with 1000 ml of distilled water and recycled aggregates. The lowest pH was about 6.2 when 50 g of coffee waste was mixed. Aggregates were treated with microwave or soaked for 1 day in vinegar (pH = 2) for neutralization reaction. Microwave treated and neutralized aggregates showed 3.3% and 6.2% higher crushing values compared to non-treated one, respectively. Neutralized treatment was more effective for crushing. In crushing tests, a sample height of 120 mm was tried, which gave 6.3% higher crushing value. A four stepped loading with each 100 kN gave 7.1% higher crushing value, compared to standard 100 mm height and 400 kN continuous loading.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.101-109
• /
• 2008

In order to investigate the influence of the water on compression characteristic of decomposed granite soils, a single particle crushing test and one-dimensional compression tests were carried out on three decomposed granite soils and Silica sand. The initial fracture strength for single particle reduced and variability of the strength increases due to weakening by existing water. Moreover, it was recognized that one-dimensional compression characteristic was related to the initial fracture strength characteristic, and the initial fracture strength also has the effect of weathering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.225-229
• /
• 2002

The quality characteristics of sulgidduk, a steamed rice cake, with chlorellaa sulgidduk) were evaluated. Chlorella sulgidduk was prepared in the different ratio of chlorella powder (0, 0.2, 0.5 or 1%, w/w) and water content (15 or 20%, w/w). In mechanical texture characteristics, hardness, gumminess and brittleness were higher in 15% water content chlorella sulgidduk and lower in 20% water content chlorella sulgidduk than in the absence of chlorella (the control sulgidduk), wherease 20% water content chlorella sulgidduk and a significantly higher adhesiveness and cohesiveness values (p<0.05) compared with control 24 hours storage at $25^{\circ}C$, the good texture characteristics were maintained in 20% water content chlorella sulgidduk. In sensory evaluation, the most favorite quality characteristics were shown in the sulgidduk with 0.2 and 0.5% chlorella powder.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.125-134
• /
• 2006

In order to establish the in-situ application of the artificial storage and recovery (ASR) technology which is used the property of the aquifer storage of groundwater. We carried out to the in-situ experiments such as borehole TV logging, pumping test and artificial hydraulic fracturing in volcanic island, Ulleungdo. In-situ experiments were conducted to divide the before- and after-hydraulic fracturing. Pumping test was achieved to confirm the two fracture zones, GL-13m and GL-21m, which are determined by the borehole TV logging. From the results of the before- and after-pumping tests, the hydraulic connectivity was confirmed to locate at GL-13m in the residual deposit zone of pumice media as alluvium. However, in the bedrock tone at GL-21m the hydraulic connectivity could be considered to faulty. Consequently, in this study area the artificial recharge has a little unsatisfied to geo-structural condition and desired to more detail investigation works.