• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.119-128
• /
• 2010

The hygrothermal effect on the strength of composite single-lap bonded joints were investigated. The specimens were manufactured in four different manufacturing methods and tested in three different environmental conditions. An interesting result is that the strengths of the joints in the elevated temperature and wet (ETW) conditions were found to be 11 ~ 23% higher than those in the room temperature and dry (RTD) environment. In contrast, the strengths of the joints in the cold temperature and dry (CTD) condition decrease by 8 ~ 21% compared to those in the RTD environment except for cobonded joint. The difference in the strength by testing environments is mainly attributed to the change of the material properties of adhesive by temperature and moisture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.507-513
• /
• 2021

This study examined the final stop position and posture of both vehicles, the damaged part of the vehicle, the road surface, the specifications of the vehicle, and the angle of impact, centering on the case of a collision in which no surface trace was found. As a result of the simulation, the impact velocity of an SM5 and Lexus was 131 km/h and 74 km/h, respectively, and the impact angle of the SM5 and Lexus was 0.91° and -161.07°, respectively. The cause of the accident was that the SM5 passed through the intersection exceeding the maximum speed limit of 61 km/h and entered the Lexus' left turn lane. Lexus collided during the evacuation to avoid the collision. The collision trajectory error rate of the simulation was approximately 1.4%. Of the subjective experience of accident investigators, the collision dynamics and vehicle engineering aspects and simulations were actively utilized to provide close-to-fact cause identification.

• Composites Research
• /
• v.19 no.4
• /
• pp.23-30
• /
• 2006

In the development of a cryogenic propellant tank, the proper selection of adhesives to bond composite and metal liner is important for the safety of operation. In this study, 3 types of adhesives were tested for the ability to bond CFRP composites developed for cryogenic use and aluminum alloy (Al 6061-T6) for lining the tank using double-lap joint specimens. The double-lap joint specimens were tested inside an environmental chamber at room temperature and cryogenic temperature ($-150^{\circ}C$) respectively to compare the bond strength of each adhesive and fracture characteristics. The material properties with temperature of component materials of double-lap joints were measured. In addition, ABAQUS was used for the purpose of analyzing the experimental results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.122-131
• /
• 1994

Journal bearings in the rotating machineries are vulnerable to the contamination or the insufficient supply of lubricating oil, which is likely to be the cause of unexpected shutdown or malfunction of these systems. Various destructive and nondestructive testing methods had been used for the reduction of maintenance cost and the operational safety problems due to the accidents related to bearing damages. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. Experimental schedules for the intervention of foreign particles was composed to be more quantitative and systematic than last study in consideration of minimum oil film thickness and particle size. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. Several parameters such as AE rms level, waveform, AE energy distribution and other AE event parameters are used for analysis and characterization of damage source. The results showed that the history of damage was well correlated with the changes of AE rms level and the type of damage source signal can be verified using other informations such as waveform, distributions of AE parameters etc.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.1-13
• /
• 2018

The proportion of natural gas-fueled power generation is expanding due to the change of domestic energy policy pursuing reduction of dust and increasing clean energy consumption. Natural gas fuels used for the combined-cycle power plants and the district-heating power plants are operated at high temperature and high pressure in the fuel supply system. Accidents due to leakage of the gas such as fire and explosion should be prevented by applying risk management techniques. In this study, risk assessment was performed on the natural gas fuel supply system of a combined power plant based on the API RP 581 RBI code. For the application of the API RBI code, lines and segments of the evaluation target system were identified. Operational data and input information were analyzed for the calculations of probability of failure and consequence of failure. The results of the risk assessment were analyzed over time from the initial installation time. In the code-based evaluation, the gas fuel supply system was mainly affected by thinning, external damage, and mechanical fatigue damage mechanisms. As the operating time passes, the risk is expected to increase due to the external damage caused by the CUI(Corrosion Under Insulation).

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.107-113
• /
• 2019

Recently, due to global warming, the trend shows an increase in number of lightning strikes which increase risk regarding industry infrastructures. Especially in case where the lightning strikes infrastructures including refinery, petorchemical plant facilities or storage tanks, it can cause power failures, electrical machine malfunction and damage which can lead to fire explosion and multiple calamities. Therefore, detailed case studies must be conducted through a systematic research regarding lightning strike accidents in order to understand its mechanism and devise preventive measures. This paper aims to study cases of explosion regarding waste water storage tanks in refineries and petrochemical plants in order to analyze its root cause and provide preventive measures for avoiding lightning related incidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• Journal of the Korean Home Economics Association
• /
• v.41 no.2
• /
• pp.1-11
• /
• 2003

본 연구의 목적은 부모가 정한 규칙에 대한 청소년의 준수 의무감 정도에 따라 청소년이 문제행동 (음주와 타인 소유물 파손행동)을 하는 친구의 영향을 받는 정도에 차이가 있는지 알아보는 것이었다. 우선. 친구의 문제행동 정도에 따라 청소년의 문제행동 가능성이 높아지는지 살펴보았다. 다음으로, 친구의 문제행동과 청소년의 문제행동 간의 관계가 부모가 정한 규칙을 지켜야 한다고 믿는 정도에 따라 다른지 살펴보았다. 연구 대상은 미국 동부 지역 소도시 소재 중학교에 재학 중인 남녀 중학생(6학년 ∼8학년) 398명이었다. 자료는 참여 학생들이 부모 자녀 관계, 문제 행동, 친구 관계 등에 관한 항목으로 구성된 질문지에 응답하게 하여 수집하였다. 위계적 회귀분석을 사용한 자료분석 결과. 친구의 문제행동 정도가 심할수록, 부모가 정한 규칙에 대한 준수 의무감이 약할수록 청소년의 문제행동 정도가 심한 것으로 나타났다. 그러나. 친구의 문제행동과 청소년의 문제행동 사이의 정적 관계는 청소년이 부모가 정한 규칙을 준수해야 한다는 의무감이 약할수록 약한 것으로 나타났다. 이 연구의 결과는 청소년기 또래 영향 연구에서 청소년의 개인적인 특성을 고려하는 것이 중요하다는 것을 시사한다. 또한, 청소년이 부모가 정한 규칙을 지켜야 한다는 의무감을 갖도록 부모가 자녀와 원만한 관계를 유지하는 것이 부정적인 친구의 영향으로부터 청소년을 보호하는 한 방법이 된다는 점도 시사한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.87-92
• /
• 2009

쇽옵서버 피스톤로드(shock absorber piston rod)는 자동차의 충격과 진동의 흡수에 작용하는 자동차 현가장치(suspension equipment)부품의 일종이다. 피스톤로드는 자동차 충격흡수에 매우 밀접한 영향을 주기 때문에 제조에 있어서 고도의 정밀도와 표면 매끄러움이 요구된다. 피스톤로드의 제조공정은 선삭, 홈가공, 밀링, 전조 등 여러 공정으로 구성되는데, 여기서 품질불량에 가장 크게 영향을 주는 공정은 선삭공정(lathing process)이다. 이는 선삭공정의 가공공구(insert component)가 주원인으로서 반복되는 가공으로 인한 공구의 마모(abrasion)나 파손(breakage)이 주요 원인으로 지적되고 있다. 따라서 가공 데이터를 수집 분석하여 공구의 교체시기를 파악한다거나 가공 부품의 측정 데이터가 관리도 상하한선 내에 있는지 등 가공 공정 전반에 대한 체계적인 공정관리 시스템 개발이 요구된다. 본 연구에서는 자동차 쇽업서버 피스톤로드 제조공정의 가공 정보를 체계적으로 수집하여 관리하고 분석하는 자동차 쇽업서버 피스톤로드 제조공정에 대한 공정관리시스템을 개발하는 것이 목적이다. 개발결과 피스톤 로드의 측정 치수 변화 및 불량발생을 측정, 감지할 수 있었으며, 본 시스템을 통해 가공공구의 치수오차를 보정(compensation)하고 공정의 불량발생을 조기에 방지 함으로써 불량률은 1/5로 경감하고 작업자 수도 1/2로 감소시킬 수 있었다.