• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.297-304
• /
• 2012

For the assessment of the performance of a wind-turbine blade, a simulated loading test may be required. In this study, the blade behavior was investigated through numerical analysis using a dual-axis loading test, closely simulating the real operation conditions. The blade structure for the 100-kW-class wind-turbine system was modeled using the finite element (FE) program ANSYS. The failure criteria and buckling analysis under dual-axis loading were examined. The failure analysis, including fiber failure and inter-fiber failure, was performed with Puck's failure criterion. As the dual-axis load ratio increases, the relatively increased stress occurs at the trailing edge and skin surface 3300-3600 mm away from the root. Furthermore, it is revealed that increasing the dual-axis load ratio makes the location that is weakest against buckling move toward the root part. Thus, it is seen that the dual-axis load test may be an essential requirement for the verification of blade performance.

• Composites Research
• /
• v.25 no.6
• /
• pp.186-190
• /
• 2012

With the wide application of fiber-reinforced composite material in aero-structures and mechanical parts, composite joint have become a very important research area because they are often the weakest sites in composite structures. In this paper, the failure strengths of the bolted joint and pin joint which have variable hole clearance were evaluated and compared. From the tests, the first failure loads of the bolted joint and pin joint with $880{\mu}m$ hole clearance have decreased by 24.2 % and 51.3 % compared to those of joints with $0{\mu}m$ hole clearance, respectively. Also, the failure index of the joints were calculated by the finite element method and compared with experimental results.

• Composites Research
• /
• v.25 no.2
• /
• pp.40-45
• /
• 2012

The comparison of the numerical results with those measured by the experiment showed good agreement. The design of composite joint which is the weakest part in the composite structures has become a very important research area since the composite materials are widely used in the aircraft and machine structure. In this paper, the new composite key joints that minimize the fiber discontinuity and strength degradation of adherend were proposed and their failure loads were evaluated. The failure index and damage area method were used for the failure prediction of the composite key joint. From the tests, the failure load of the composite key joint was 93% larger than that of a mechanical joint and the key joint whose slot depth and edge length were 0.88mm and 20mm had the largest failure load. Also, the analytic failure modes by the failure index and damage area were compared with experimental failure modes.

• Composites Research
• /
• v.36 no.3
• /
• pp.154-161
• /
• 2023

This study explored the feasibility of replacing a metal link with a carbon fiber/epoxy composite link and assessed its capacity to withstand a given load condition using failure criteria. The micromechanics of failure (MMF) criterion was employed to predict the failure mode of the composite material, and mechanical tests were conducted to obtain reference strength parameters for MMF. The findings revealed that the stress distribution was concentrated near the hole, and weaknesses were found around the hole and at the end of the link under bending conditions. Based on the failure index, matrix tensile failure was predicted at the end of the link, and fiber compression failure occurred near the hole. The methods and results obtained from this study can provide valuable guidelines for assessing the safety of composite materials under specific load conditions when replacing metal parts with carbon fiber/epoxy composites to achieve weight reduction.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.100-109
• /
• 1998

In order to increase productivity through unmanned machining in CNC milling process, in-process tool fracture detection is required. In this paper, a new algorithm for tool fracture detection using cutting load variations was developed. For this purpose, developed were tool condition vector which is dimensionless indicator of cutting load and tool fracture index (TFI) which represents magnitude of tool fracture. Through cutting force simulation, tool fracture index was shown to be independent of tool run-outs and cutting condition variations. Using tool fracture index, the ratio of the tool fracture to feed per tooth could be indentified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.881-888
• /
• 1997

A new algorithm for detection of tool fracture in milling process was developed. The variation of the peak-to-valley value of cutting load was used in this algorithm. Various kinds of vectors representing the condition of tool, such as tool condition vector, reference tool condition vector, tool condition variation vector were defined. Using these vectors, tool fracture index which represents the magnitude of tool fracture and is independent of tool run-outs is developed. Small and large tool fracture and chipping under various cutting condition could be detected using proposed tool fracture index, which was proved with cutting force model and experiments.

• Composites Research
• /
• v.30 no.4
• /
• pp.229-234
• /
• 2017

Generally, joints are the weakest part in the composite structures. Composite joints can be classified into adhesive joints and mechanical joints, and mechanical joints are mainly used in areas less sensitive to environmental conditions. In this paper, the failure loads of composite mechanical joints with five different stacking angles are tested and predicted. Finite element analysis of mechanical joints were performed and failure loads were predicted by the FAI(Failure Area Index) method using Tsai-Wu and Yamada-Sun failure criteria, and the predicted failure loads were compared with experimental results. From the experiment and analysis, the failure loads of the mechanical joints were decreased as the ratio of 0 degree layer was low and they could be predicted within 13.03% using the FAI method and Yamada-Sun failure criteria.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.3
• /
• pp.35-43
• /
• 1990

본 연구의 목적은 파손과 보수비에 대한 미정보 사전분포와 공액 사전분포의 제곱오차 손실 함수 하에서 Gaver 와 Maxumder(1967) 에 의하여 제기된 두 개의 상태과정 즉 파손과 보수과정에 있어서 보수할 수 있는 성분에 대한 유용도를 어떤 베이지안으로서 실제의 값에 가까운 점 추정치를 구할 수 있는 수학적 모델을 만드는데 목적을 두며 앞으로 이를 선박기기 및 항해기기등의 보수정비에 관한 운용등에 적용할 수 있으리라 사료된다.

• Composites Research
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2003

As the use of composites has become popular in recent years, the design of the composite joints has become a very important research area because the structural efficiency of the composite structure is determined by its joints, not by its basic structures. In this paper, presented comparisons of numerical results by the FAI(Failure area index) method[9] and measured data for a various geometric shapes and stacking sequence justify the validity of the FAI method. The FAI method is shown to produce very favorable comparisons with measured failure loads of mechanically fastened composite joints with the difference well within 9.96% for all II cases investigated.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.525-535
• /
• 2009

In this paper a heuristic method for identifying individual pipes in water pipe networks to determine specific sections of the pipes that need to be replaced due to deterioration. An appropriate minimum pipe length is determined by selecting the pipe length that has the greatest variance of the average cumulative break number slopes among the various pipe lengths used. As a result, the minimum pipe length for the case study water network is determined as 4 m and a total of 39 individual pipe IDs are obtained. The economically optimal replacement times of the individual pipe IDs are estimated by using the threshold break rate of an individual pipe ID and the pipe break trends models for which the General Pipe Break Prediction Model(Park and Loganathan, 2002) that can incorporate the linear, exponential, and in-between of the linear and exponetial failure trends and the ROCOFs based on the modified time scale(Park et al., 2007) are used. The maximum log-likelihoods of the log-linear ROCOF and Weibull ROCOF estimated for the break data of a pipe are compared and the ROCOF that has a greater likelihood is selected for the pipe of interest. The effects of the social costs of a pipe break on the optimal replacement time are also discussed.