• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.911-918
• /
• 2010

With limitation of frequency bandwidth, the range accuracy of typical radars is limited. In this paper, for short distance measurements, the use of an AM(Amplitude Modulated) radar which provides improved range accuracy is proposed. The AM radar signal consists of a carrier frequency signal and double-sideband components. The fabricated AM radar operates with +10 dBm output power and 35 dB receiver gain at 24.128 GHz center frequency with 20 MHz bandwidth, and the range accuracy is measured as ${\pm}15\;cm$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2187-2193
• /
• 2010

A specific radar system can be implemented more easily using the frequency modulated continuous wave comparing with the pulse Doppler radar. It also has the advantage of LPI (low probability of interception) because of the low power and wide bandwidth characteristics. These radars are usually used to cover the short range area and to obtain the high resolution measurements of the target range and velocity information. The transmitted waveform is used in the mixer to demodulate the received echo signal and the resulting beat signal can be obtained. This beat signal is analyzed using the FFT method for the purpose of clutter removal, detection of a target, extraction of velocity and range information, etc. However, for the case of short signal acquisition time, this FFT method can cause the serious leakage effect which disables the detection of weaker echo signals masked by strong side lobes of the clutter. Therefore, in this paper, the weighting window method is analyzed to suppress the strong side lobes while maintaining the proper main lobe width. Also, the results of FFT beat spectrum analysis are shown under various environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.949-956
• /
• 2016

By recent development of wired and wireless communication technology, any service can be delivered through broadcasting networks or communication networks. So contents consumers want to receive broadcasting program via any accessible network. Network independent broadcasting system can receive optimized multimedia contents by combining the high-quality multimedia contents transmitted through broadcasting network and the additional contents delivered through communication network. Additional contents can be other multimedia contents, URL of contents, some texts for indicating information of received multimedia, etc. Network independent broadcasting system is in early stage of development, and receivers and the monitoring system for hybrid broadcast are under development. Thus the multiplexing method and demultiplexing method to perform hybrid broadcasting is on study. In this paper, we designed the demultiplexing algorithm to perform hybrid broadcasting system and implemented demultiplexer system based on modulator interface system standard T2-MI of DVB-T2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.168-177
• /
• 2005

In this paper, we numerically investigated the optimum pump light power resulting best compensation of pulse distortion due to both chromatic dispersion and self phase modulation (SPM) in long-haul 3×40 Gbps wavelength division multiplexing (WDM) systems. We used mid-span spectral inversion (MSSI) method with path-averaged intensity approximation (PAIA) as compensation approach, which have highly nonlinear dispersion shifted fiber (HNL-DSF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that HNL-DSF is an useful nonlinear medium in OPC for wideband WDM transmission, and in order to achieve the excellent compensation the pump light power is selected to equal the conjugated light power into the latter half fiber section with the input light power of WDM channel depending on total transmission length. Also we confirmed that compensation degree of WDM channel with small conversion efficiency is improved by using pump light power increasing power conversion ratio upper than 1.

• Journal of Broadcast Engineering
• /
• v.10 no.1 s.26
• /
• pp.14-21
• /
• 2005

This paper described an Enhanced-xVSB system for improving mobile/pedestrian reception performance to the ATSC(Advanced Television System Committee) DTV 8-VSB transmission standard. E-xVSB system can transmit a mixture of normal (8-VSB) stream and enhanced (robust) stream. The robust stream has a higher threshold of visibility (TOV) compared to the standard stream, and legacy receivers ignore the robust packets. Thus, Enhanced-xVSB system is fully backward compatible with a current ATSC standard. For mobile and portable reception support, E-xVSB system adopts a reduced constellation methodas well as enhanced trellis-coded modulation scheme. E-xVSB system supports a variety of enhanced modulation schemes : Pseudo-2VSB, Enhanced-4VSB, modified Enhanced-8VSB and Hybrid-VSB. Proposed E-xVSB system performs well under serious dynamic multipath reception environment.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.238-249
• /
• 2003

Eureka 147 DAB system based on the orthogonal frequency division multiplexing (OFDM) was adopted as the transmission scheme for terrestrial digital multimedia broadcasting (DMB) system in Korea. The OFDM has several advantages comparing to the single carrier modulation. However, its high Peak-to-average power ratio (PAPR) increases the complexity of the D/A and A/D converters and reduces the efficiency of the high power amplifier To reduce the high PAPR of OFDM, various techniques such as clipping, peak windowing, companding, selected mapping (SLM), Partial transmit sequences (PTS), etc. have been proposed. In this paper, we propose modified configurations of SLM and PTS for effective implementation and evaluate the performance on the PAPR reduction of DMB system. The simulation results show that the modified SLM (MSLM) has merits in reducing the amount of computation and hardware complexity due to the reduction of the number of vector $P^{(U)}$, while satisfying the same performance and maintaining the same required bits (RB) for side information. With the same amount of computation and the same RB, the modified PTS (MPTS) is also shown to be better than PTS in the performance of PAPR reduction.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2008

International Civil Aviation Organization(ICAO) adopted VOR(Very high frequency Omni-Range) as an international standard air navigation system in 1949 and recommended every country to make use of it in formulating air route and guiding take-off and landing of an aircraft. VOR is quite a useful navigation system so that more than 2,000 VORs have been installed all over the world including 39 in Korea: however, VOR signal could be easily affected by its circumstance like a mountainous area because it provides navigation information through AM and FM of VHF carrier. Therefore this study intends to investigate how much VOR performance is affected by its circumstances. For this purpose, the performance of the 10 VORs influenced by 24 obstacles are measured and analyzed by using an aircraft equipped with measuring instruments. This study may give us a feasible solution of problems related to the VOR siting in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1206-1212
• /
• 2007

International Civil Aviation Organization(ICAO) adopted VOR(Very high frequency Omni-Range) as an international standard air navigation system in 1949 and recommended every country to make use of it in formulating air route and guiding take-off and landing of an aircraft. VOR is quite a useful navigation system so that more than 2,000 VORs are currently installed all over the world including 39 in the Republic of Korea; however, VOR signal could be easily affected by its circumstance like a mountainous area because it provides navigation information to an aircraft through AM and FM of VHF carrier. There are two types of VOR which are defined according to a design methode. Therefore this study intends to investigate which type of VOR is suitable for mountainous area. For that purpose, the performance of each CVOR and DVOR is measured and analyzed by using an aircraft equipped with measuring instruments. The analyzed result will be applied and utilized in selecting the VOR type, so it could be a feasible solution of problem related to the VOR relocation due to its insufficient performance in the future.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.269-274
• /
• 2004

In this paper, proposed is the dual-mode algorithm of blind decision feedback equalizer (DFE) for digital terrestrial television signals. According to channel impairments, the proposed dual-mode algorithm for blind DFE operates in decision-directed mode or in blind mode of operation. The error signals being used in tap update of the equalizer are generated in the best mode of operations, so that the confidence of equalizer tap coefficient update is more accurate. As a result, it is possible to track the channel characteristics variations by automatic switching over between two modes of operations. For 8-level vestigial sideband modulated digital television signals, the mean square errors and symbol error rates of the proposed algorithm are compared with those of conventional methods. And the usability of the proposed scheme is assessed by computer simulations under various static and dynamic multipath channel environments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.50-58
• /
• 2000

A Mach-Zehnder type $Ti:LiNbO_3$ optical modulator with a grooved $SiO_2$ buffer layer, was evaluated in terms of an electrode structure. The finite element method was performed to find out the optinum design parameters of electrodes. characteristic impedance ($Z_o$), MW effective index ($N_{eff}$) and attenuation constant ($a_o$)of fabricated traveling-wave electrodes were measured and compared with those obtained by the simulation expectation. For an optical modulator with 11${\mu}m$thick electrodes and a grooved $SiO_2$ buffer layer, the 3dB bandwidth based on the RF measurement results turned out to be 18GHz.