• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.79-92
• /
• 2011

In this study, wave pressure of short-period gravity waves and tsunami acting on the upright section of the horizontal-slit type caisson placed on the impermeable or permeable seabed, which is a well-known permeable breakwater with a good wave controlling ability, are investigated via numerical simulations. Further, the permeable seabed was modeled as the porous media with porosity of 0.4. Using the numerical results, the effects of the seabed conditions on the wave pressure on the front wall and inside wall of the chamber have been studied. In the numerical simulations, short-period gravity waves and tsunami(solitary wave or bore) with the same amplitude to the gravity wave are considered. A numerical wave tank is used, which is able to consider a gas-liquid two-phase flow in the same calculation zone. Numerical results show that the wave pressure of the tsunami was 3~5 times higher than the short-period gravity waves acting on the front wall and it was 2~4 times higher than the short-period gravity waves acting on the inner wall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.2
• /
• pp.136-145
• /
• 2007

When waves propagating over an underwater shoal break at the top of the shoal, wave heights are drastically decreased in the downstream breaking zone, but a secondary current shooting downstream with strong velocity can be induced by the breaking waves themselves. In the case that an offshore structure is placed in the breaking zone, the estimation of wave farce purely based on the visible wave height may cause an under-design of the structure. Thus, for the safe design of the structure, the breaking wave induced current should be necessarily considered in the comprehensive estimation of design load. In the present study, Boussinesq equation model to calculate the wave height distribution and breaking wave induced current was set up and applied to the scheme of a hydraulic model test previously undertaken. Based on the results of the Boussinesq model, fluid forces acting on the model structure were calculated and compared with the experimental results. The importance of the breaking wave induced current was quantitatively assessed by comparing fluid forces with or without current.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.351-362
• /
• 2020

Numerical simulations of the storm surge and waves induced by the Typhoon Maemi incident on the south sea of Korea in 2003 are performed using the JMA-MSM forecast weather field, NCEP-CFSR reanalysis weather field, ECMWF-ERA5 reanalysis weather field, and the pressure and wind fields obtained using the best track information provided by JTWC. The calculated surge heights are compared with the time history observed at harbours along the coasts of Korea. For the waves occurring coincidentally with the storm surges the calculated significant wave heights are compared with the measured data. Based on the comparison of surge and wave heights the assessment of the reliability of various weather fields is performed. As a result the JMA-MSM weather fields gives the highest reliability, and the weather field obtained using JTWC best track information gives also relatively good agreement. The ECMWF-ERA5 gives in general surge and wave heights weaker than the measured. The reliability of NCEP-CFSR turns out to be the worst for this special case of Typhoon Maemi. Based on the results of this study it is found that the reliable weather fields are essential for the accurate simulation of storm surges and waves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.142-149
• /
• 2019

In this study, the past erosion history and current status in the CHUNG-UI beach of Eulwang-dong, Jung-gu, Incheon-Si, South Korea were investigated and analyzed the wave with wave-induced current to investigate the causes of coastal erosion. As a result, the significant wave height ($H_{1/3}$) was in the range of 0.07~1.57 m and the mean value was 0.21 m. The maximum wave height ($H_{max}$) was in the range of 0.02-4.76m and the mean value was 0.27m. The vertical wave height and cycles were estimated through numerical model experiments of wave transformation. The 50-year frequency design wave height ranged from 0.82m to 3.75m. As a result of the experiment of wave-induced current, wave-induced current in the CHUNG-UI beach was decreased after the installation of the Detached breakwater and the Jetty. On the other hand, when the crest elevation was increased up to 5 m, there was no significant change, but when the crest elevation was increased to 8m, strong wave-induced current occurred around the submerged breakwaters due to lowered depth of water. In addition, the main erosion of the CHUNG-UI beach is due to the intensive invasion of the wave characteristics coming from the outer sea into the white sandy beach. The deformation of the wave centered on the front of the sandy beach caused additional longshore currents flowing parallel to the sandy beach and rip currents in the transverse direction, thus confirming that the longshore sediment was moved out of the front and out of the sea. The results of this study can be used as preliminary data for the recovery of the sand and the selection of efficient erosion prevention facilities.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.385-396
• /
• 2012

The geochemical high-grade uranium anormal zone has been reported in the Shinbo mine and its eastern areas, Jinan-gun, Jeollabuk-do located in the southwestern part of Ogcheon metamorphic zone, Korea. In this paper is reported the time-relationship between deformation and growth of metamorphic minerals in the eastern area of Shinbo mine, which consists of the Precambrian metasedimentary rocks (quartzite, metapelite, metapsammite) and the age-unknown pegmatite and Cretaceous porphyry which intrude them, and is considered the relative mineralization time on the basis of the previous research's result. The D1 deformation formed the straight-type Si internal foliation which is defined mainly as the arrangement of elongate quartz, biotite, opaque mineral in andalusite porphyroblast. The D2 deformation, which is defined by the microfolding of Si foliation, formed S2 crenulation cleavage. It can be divided into two sub-phases, early crenulation and late crenulation. The former occurs as the curvetype Si foliation in the mantle part of andalusite. The latter occurs as S1-2 composite foliation which warps around the andalusite. The andalusite porphyroblast began to grow under non-deformation condition after the formation of S1 foliation which corresponds to the straight-type Si foliation. It continued to grow before the late crenulation phase. The age-unknown pegmatite intruded after the D2 deformation and grew the fibrous sillimanite which random masks the S1-2 composite foliation. The D3 deformation formed F3 fold which folded the S1-2 composite foliation, D2 crenulation, fibrous sillimanite. It means that the intrusion of pegmatite related to the growth of the fibrous sillimanite took place during the inter-tectonic phase of D2 and D3 deformations. The retrograde metamorphism is recognized by the chloritization of biotite and two-way cleavage lamellae which is parallel to the S1-2 composite foliation and the F3 fold axial surface in the andalusite porphyroblast. It occurred during the D2 late crenulation phase and D3 deformation. In considering of the previous research's result inferring the most likely candidate for the uranium source rock as pegamatite, it indicates that the age-unknown pegmatite intruded during the inter-tectonic phase of D2 and D3 deformations, i.e. during the retrograde metamorphism related to the uplifting of crust, and formed the uranium ore zone around the Shinbo mine.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.437-457
• /
• 2004

The geology of the Kualakulun in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Tanjung Formation was deposited in low-and high-sinuosity channel networks developed on the proximal to distal delta plain and delta front forming southward paleoflow system, which, in turn, gradually change into shallow marine environment. Four main deformational phases are recognized: D1, folding of metamorphic rocks accompanied by development of S1 schistosity under regional metamorphic condition; D2, ductile shearing in Cretaceous granitoids; D3, folding of metamorphic rocks accompanied by S2 crenulation cleavage; D4, faulting under N-S compressional regime during Tertiary times, producing NE-trending sinistral and NW-trending dextral strike-slip faults and N-S to NNE-trending normal faults.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.271-278
• /
• 1995

A study of heavy mineral sands in terms of heavy mineral group and concentration has been carried out by analyzing 88 grab samples from the continental shelf off the southeast coast of Korea. Heavy mineral groups seem to be outlined and classified into four regions in the study area: 1) the western region; high concentrations of stable minerals, such as opaque mineral, magnetite, garnet and ZTR, 2) Korean Trough region; moderate concentrations of stable minerals, 3) the eastern region; abundant altered mineral and amphibole with minor of pyroxene concentration, and 4) the northeastern shelf-break region; low concentration of stable minerals with abundant altered minerals. The sedimentologic natures of four major heavy mineral regions (groupings) seem to be influenced by physical, dynamic and hydraulic milieu and also aerial and/or subaqueous weathering processes. It seems to be, further, plausible that shallow marine waves and currents associated with neritic dynamic condition of transgressive sea might be very effective on the concentration and groupings (sorting) of heavy min-erals in the surficial sediments of the continental shelf. The pyroxene-abundant heavy mineral suite (group), in fact, seems to suggest a sediment source from Japanese Islands.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.1
• /
• pp.50-55
• /
• 1999

Gao and Collins method (two-dimensional sediment transport trend-vector model) using grain-size parameters (mean grain size, sorting coefficient, and skewness) calculated by the statistical moment method is introduced to understand semi-quantitatively the sandy and surficial sediment transport trends on a coast of the East Sea. The result is the sediment transport vectors which indicate transport paths of surficial sediment by wave-induced currents. The corresponding morphological feature is a spit developed at the mouth of the Nam¬dae stream, which is a resultant sediment transported by longshore current and is blocking the circulation of ocean. After this, it is thought that seasonal research and hydrodynamic measurements are needed for verification of the results.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.83-92
• /
• 2011

The properties and changes of geomorphic relief and coastal deposits were analyzed at Goreabul sand beach in Yeongdeok-gun, the largest that in east coast of Kyungsangbuk-do Province. As the result of grain size analysis, in almost season except summer, the sands mainly deposited in Goraebul sand beach because longshore current drift northward contrary to Gangwon-do east coast, and summer longshore current is weak or change direction to south ward. Sand beach mostly came form erosion owing to typoon and storm and was deposit more coarse sand in the summer, and was produced deposition actively in the fall and winter. Front side of sand dune came from deposition on sand every season by sea breeze, especially in the winter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.4
• /
• pp.87-94
• /
• 1985

Dynamic analysis of guyed tower is presented in this paper. The scope of the study is twofold. The one is to determine an efficient analysis method to include the nonlinearity of the mooring system and the nonlinear hydrodynamic wave forces. The other is to investigate the sensitivity of two major design parameters, that is the stiffness of mooring system and the fixity condition of the tower at mud line. Time history analysis method utilizing mode superposition is mainly considered. However several other methods are also used for the purpose of comparison. Analyses are carried out using the Lena Guyed Tower, which is the first structure of this kind, as a standard structure.