• Korean Journal of Organic Agriculture
• /
• v.25 no.3
• /
• pp.631-642
• /
• 2017

For effective control of insect pest which can outbreak in a field during crop cultivation, various control agents such as eco-friendly agricultural materials (EFAM) including microbial control agents and chemical pesticides have been applied at fields and these control agents may be treated simultaneous or sequential in the same field to suppress diverse pests and diseases. The agents may influence each other and control efficacy may also differ from interactions. Therefore we need to test compatibility of microbial control agents with other agricultural agents. In this study, we investigated influence of pre-treated EFAMs, which are registered for whitefly control in greenhouse, on germination, mycelial growth and control efficacy of Isaria javanica isolate against sweet potato whitefly. The results showed that a mixture of paraffin oil+cinnamon oil among 4 EFAMs highly reduced germination ($8.9{\pm}1.3%{\sim}24.5{\pm}0.9%$) and mycelial growth ($0.81{\pm}0.01cm{\sim}0cm$) of I. javanica. To investigate the effects of the treatment interval between EFAMs and I. javanica on sweet potato whitefly control, four different EFAMs were pre-treated 0, 1, 4, and 7 days before applying I. javanica. Pre-treatment of four EFAMs inhibited insecticidal activity of I. javanica against sweet potato whitefly. Therefore when EFAMs and a mycopesticide using I. javanica spray simultaneous or sequential, application of EFAMs need more than 7 days interval after treatment of mycopesticide at field.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.699-701
• /
• 2010

Purpose: Mondor's disease is a rare benign condition which involves thrombophlebitis of the superficial veins of the breast and anterior chest wall after breast surgery, breast tissue biopsy, inflammatory reaction, breast cancer, trauma. The affected veins include the lateral thoracic, axillary veins, thoracoepigastric veins and superior epigastric veins. Methods: A 49-year-old woman presented to the outpatient department with complaints of the sudden appearance of a subcutaneous cord just under the skin at left lower lateral abdominal wall 1 month later of bilateral mastectomy due to both severe breast paraffinoma. The cord was initially red and tender and subsequently became a painless, tough, fibrous band that was accompanied by tension and skin retraction. Results: On ultrasonographic findings, palpable threadlike structures at both lateral superficial abdominal wall after bilateral mastectomy were noted. Superficial short elongated hypoechoic tubular structures were noted just under the skin at palpable lower lateral abdominal wall. It was compatible to Mondor's disease of thoracoepigastric vein. Conclusion: The increase in breast surgery will give rise to the increase in the frequency of Mondor's disease clinically. Mondor's disease can be diagnosed with clinical symptoms and image findings and the disease has proved to be benign and self-limited.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.530-534
• /
• 2014

Polyethylene (PE) membranes having various porosities are used as microfilters and separators in lithium ion batteries. Membranes having a high porosity are required for use as separators in a large scale lithium ion secondary battery. In this study, BET was examined for use as a new nontoxic diluent for the fabrication of highly porous PE membranes by thermally induced phase separation process. It was confirmed that BET can be used as a new diluent for the fabrication of the PE membranes by exploring upper critical solution temperature type phase behavior of PE mixtures with BET. When the porosity of the membrane prepared from the PE/PO mixture was compared with that prepared from PE/BET mixture, the latter was about 1.8 times higher than the former.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.63-70
• /
• 2013

In this paper, we have implemented the performance evaluation system of the unified fuel heater for CRDI diesel engine. If the diesel engine be cold by low temperature in winter, then that makes the waxing materials like a paraffin and is the source of poor engine starting. The unified fuel heater is the barrow meter that estimate the start performance of diesel engine, and be tested by test chamber. The chamber perform the normal temperature, an extremely low temperature, an operating performance in an extremely high temperature, the resistance operation delay time and current operation delay time in setting up test resistance, the bimetal delay time test in temperature variation, the current and resistor test of the composited heater, a heating operation test.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.19-37
• /
• 1995

A fine oil -in-water (O/W) emulsion using non-aqueous emulsification technique was developed. And the behaviors of POE(25)octyldodecyl ether in non-aqueous polyol/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecy1 ether hardly existed as the micelle in the non-aqueous polyol system while, in water, it formed micelles very easily. So, when a polyol, like glycerine in which POE(25)octyldodecyl ether has a poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25)octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0$^{\circ}C$, 25$^{\circ}C$, 40$^{\circ}C$, 50 $^{\circ}C$ and freeze-thaw cycle chamber for a month, while a conventional emulsion system was unstable. It is concluded that, by pertinent combination of polyols, we can improve the adsorption efficiency of surfactant.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.215-225
• /
• 2015

Recently, the importance of energy saving and alternative energy is significantly increasing due to energy depletion and the phase change material (PCM) research for saving energy is also actively investigating. In this research, the membrane emulsification using SPG membrane was used to make various microencapsulated phase change material (MPCM) particles which were comprised of $Rubitherms^{(R)}$ (RT-21 and RT-24) core and silica coating. We investigated the pressure of the dispersion phase, the concentration of surfactant, and the ratio of $Rubitherm^{(R)}$ and silica to prepare various MPCM particles. The DSC and TGA were used to examine the heat stability and latent heat properties. Also, PSA, SEM, and optical microscopy were used to confirm the size of $Rubitherm^{(R)}$ particles and the thickness of silica shell. The average of particle size was $7-8{\mu}m$. And, FT-IR was also used to enforce the qualitative analysis. Finally, the MPCM particles obtained from membrane emulsification showed monodispersed size distribution and the heat stability and latent heat were kept up to 80% compared to pure $Rubitherm^{(R)}$. So, it can be effectively used for wallpaper, buildings and interior products for energy saving as PCMs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.307-315
• /
• 2012

Recently, ultra high performance fiber reinforced concrete (UHPFRC) having over 180 MPa compressive strength and 10 MPa tensile strength has been developed in Korea. However, UHPFRC represents different material properties with normal concrete (NC) and conventional high performance concrete (HPC) such as a high early age autogenous shrinkage and a rapid dry on the surface, because it has a low water-binder ratio and high fineness admixtures without coarse aggregate. In this study, therefore, to propose suitable experimental methods and regulations, and to evaluate mechanical properties at a very early age for UHPFRC, setting, shrinkage and tensile tests were performed. From the setting test results, paraffin oil was an appropriate material to prevent drying effect on the surface, because if paraffin oil is applied on the surface, it can efficiently prevent the drying effect and does not disturb or catalyze the hydration of cement. From the ring-test results, it was defined that the shrinkage stress is generated at the time when the graph tendency of temperature and strain of inner steel ring is changed. By comparing with setting test result, the shrinkage stress was firstly occurred as the penetration resistance of 1.5 MPa was obtained, and it was about 0.6 and 2.1 hour faster than those of initial and final sets. So, the starting time of autogenous shrinkage measurement (time-zero) of UHPFRC was determined when the penetration resistance of 1.5 MPa was obtained. Finally, the tensile strength and elastic modulus of UHPFRC were measured from near initial setting time by using a very early age tensile test apparatus, and the prediction models for tensile strength and elastic modulus were proposed.

• Radiation Oncology Journal
• /
• v.14 no.2
• /
• pp.87-93
• /
• 1996

Purpose : To determine the incidence and prognostic effects of EGFR over-expression in the high-grade astrocytomas. Materials and Methods : With 23 paraffin blocks of the high-grade astrocytomas (7 anaplastic astrocytomas and 16 glioblastoma multiforme), expression of EGFR were evaluated by immunohistochemical staining employing polyclonal antibody raised to short cytoplasmic domain of the molecule. Result : Two out of 7 anaplastic astrocytomas and 9 out of 16 glioblastoma multiforme patients showed overexpression of EGFR(p=0.44). Three out of 11 patients of age below 55 and 8 out of 12 patients of age over 54 showed EGFR overexpression(p=0.141). Median survival of the EGFR negative anaplastic astrocytoma patient was 37 months. Median survival of the glioblastoma multiforme Patients were 11 months in EGFR negative group and 7 months in EGFR positive group. But survival difference was not significant (p=0.17). Conclusion There was a marked trend of increasing overexpression of EGFR in older patients. But survival of the glioblastoma multiforme decreased by the overexpression of the EGFR without significant.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.2
• /
• pp.169-177
• /
• 2003

Purpose: The purpose of the current study is to evaluate the correlation between the expressions of p21 and p27 in osteosarcoma, and prognostic impact such as local recurrence, distant metastasis and survival rate. Materials and methods: Between 1988 and 2001, forty patients who underwent surgery, followed more than 12 months, and whose pathologic blocks were available, were evaluated retrospectively. Their formalin-fixed and paraffin-embedded tumor specimens were investigated. The correlation between expressions of p21, p27, local recurrence, distant metastasis and survival rate was statistically evaluated. Results: p21 protein was expressed in 38 (95%) patients. p27 protein was expressed in 14 (35%) patients. Patients with high expression of p21 had more frequent metastasis and poorer results (p=0.024). In contrast with these findings, patients with positive staining of the p27 had the significant lower distant metastasis (p=0.028). Conclusion: The prognosis of the osteosarcoma according to the expression level of p21 and p27 had inverse relationship which had unknown mechanism. Further work will be needed to define the relationship between p21 and p27.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.434-443
• /
• 2023

We have investigated the performance improvement of grease by synthesizing calcium sulfonate grease as an alternative to lithium grease, which is widely used globally. Since the composition ratio of the grease, when manufactured, is usually 50% base oil and 50% thickener, using grease as a lubricant in a cryogenic environment is not encouraged due to its inferior low-temperature performance. In this study, we have synthesized three types of calcium sulfonate grease with paraffin oil and PAO-based base oil and thickener. Furthermore, lithium grease was synthesized via saponification with PAO-based base oil, lithium hydroxide, 12-hydroxystearic acid, and sebacic acid. We have measured low-temperature characteristics using a rheometer and low-temperature torque meter, and tribology characteristics were obtained using a four-ball lubricant tester and schwingung reibung verschleiß (SRV). As a result, the flow point of the calcium sulfonate grease synthesized with a PAO-based base oil and thickener was found to be -40℃, overcoming the existing calcium sulfonate grease's low-temperature limitation. Moreover, the synthesized calcium sulfonate grease showed low-temperature performance similar to that of lithium grease synthesized with PAO base oil, but superior anti-wear, extreme pressure, coefficient of friction, heat resistance, adhesion, and corrosion resistance. It is thus expected to commercially replace the existing lithium grease.