• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.45-54
• /
• 2019

The damage detection method using the extended Kalman filter(EKF) technique has been continuously used since EKF can estimation the responses of the damaged building structure and the stiffness of the structure. However, in the use of EKF, the requirement of setting the initial paramters P, Q, and R has caused the divergence and instability of the state vector, and various researches have been conducted to determine theses parameters. In this paper, adaptive extended Kalman filter(AEKF) method is proposed to solve the problem of setting the values of P, Q, and R, which are important parameters determining the convergence performance of the EKF state vector. By using the AEKF method proposed in this study, the P, Q, and R parameters are updated every k steps. The proposed algorithm is applied for the estimation of stiffness and the damage detection of 3-DOF problem. Based of the verification, it can be found that the selection process for the values of P, Q, and R can improve the convergence performance of EKF.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.733-738
• /
• 2014

In this paper, the performance of the narrowband channelized radiometer that have a short detection time and high time-resolution was verified based on the theoretical formula. According to the simulation result, the channelized radiometer showed 2.5 dB superior detection performance compared to the broadband radiometer, but is more sensitive to the effects of noise than the broadband radiometer. Also the signal-to-noise of a channelized radiometer was changed dramatically according to the hop rate and jitter effect, which is linearly decreased as the change of two parameters.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.1015-1022
• /
• 2013

This study simulates the operation of a 200 kW class micro gas turbine that is currently under development. The performance and operating characteristics depending on the load control scheme (constant turbine inlet temperature versus constant turbine exit temperature) and ambient condition were investigated using detailed component performance data. The sensitivities of operating parameters, such as the compressor surge margin and flow path temperatures, according to unit fuel flow change were predicted for a wide load range. The sensitivity analysis showed that the steady state calculation provided useful information about the maximum surge margin reduction during load change.

• Electronics and Telecommunications Trends
• /
• v.16 no.1 s.67
• /
• pp.56-70
• /
• 2001

마이크로파대 이상의 높은 RF 전파는 신호레벨이 비교적 작고 간섭현상에 매우 민감한 특성을 가지고 있다. 따라서 이러한 미소한 입력전파의 수신시 수신기 전체의 감도를 높이고 잡음을 저감시킬 목적으로 사용되는 고주파 증폭기가 저잡음 증폭기이다. 본 고에서는 LNA의 기본적 특성분석과 지능형교통시스템에 응용되는 5.8GHz대 단거리전용통신용 LNA를 구현하기 위한 기본 FET 증폭기의 전기적 특성을 연구하고 직렬 궤환에 의한 최소잡음과 최소 입력 정재파비의 최적 설계 파라미터를 도출하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.57-64
• /
• 2001

This paper propose a robust control method to achieve a desired system performance in spite of system uncertainty and disturbance uncertainty. The procedures of the robust controller based on QFT(Quantitative Feedback Theory) make template, bound and loop shaping which are considered by system parameter variations and performance specifications. To prove the efficiency, the designed controller is applied for an inverted pendulum which is so sensitive to the parameter variation and has a highly nonlinear and unstable characteristics. It is shown that the simulation and experimental results from the proposed controller are efficient in robustness of parameter variation and disturbance.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.11-20
• /
• 2007

AAM has been successfully applied to face alignment, but its performance is very sensitive to initial values. In this paper, we propose a face alignment method using progressive AAM. The proposed method consists of two stages; modelling and relation derivation stage and fitting stage. Modelling and relation derivation stage first builds two AAM models; the inner face AAM model and the whole face AAM model and then derive the relation matrix between the inner face AAM model parameter vector and the whole face AAM model parameter vector. The fitting stage is processed progressively in two phases. In the first phase, the proposed method finds the feature parameters for the inner facial feature points of a new face, and then in the second phase it localizes the whole facial feature points of the new face using the initial values estimated utilizing the inner feature parameters obtained in the first phase and the relation matrix obtained in the first stage. Through experiments, it is verified that the proposed progressive AAM-based face alignment method is more robust with respect to pose, and face background than the conventional basic AAM-based face alignment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.217-217
• /
• 2021

우리나라 동해 연안에 영향을 미쳤던 역사지진들과 일본에서 진행된 동해에서의 대규모지진에 관한 조사검토회에서 2014년에 보고된 동해 동연부와 남해 남연부 측에 있는 60개의 지진공백역들에 대한 단층매개변수들이 공개되어있어 수치실험을 통해 지진해일의 재해도를 분석하고 있다. 하지만 이러한 단층매개변수 값들에 대한 불확실성이 존재하기에 이를 대비한 지진해일 대책을 세울 필요가 있다. 단층매개변수의 불확실성을 고려하는 방법 중 한 가지는 해당 변수들을 조정하여 Case 모델들을 다양화하는 것이다. 이 때 매개변수의 변동에 대한 기준이 필요하기에 단층매개변수에 대한 민감도 분석이 진행되어야 한다. 본 연구의 최종목표는 지진해일에 대한 위험성에 대비하기 위해 선정된 연구지역에 대하여 단층매개변수들을 조정한 경우별 모델들을 사용한 수치모형 실험을 실행한 후 도출된 지진해일 처오름높이 및 처내림높이 결과를 분석하여 각 단층매개 변수의 지진해일에 대한 민감도를 결정하는 것이며, 최종적으로 확률론적 지진해일 재해도분석(Probabilistic Tsunami Hazard Analysys : PTHA)을 실시할 때 기준이 되는 로직트리를 작성할 때 명확한 근거를 제시한다. 단층매개변수의 민감도 분석은 일본(Goda et al., 2014), 미국(Sepúlveda and Liu, 2016), 뉴질랜드(D. Burbridge et al., 2015) 등에서 연구가 활발하게 이루어졌으며 현재도 활발한 연구가 진행되고 있다. 민감도 분석 과정은 먼저 역사 지진해일과 우리나라 근해에 영향을 미칠 수 있는 지진해일의 단층매개변수 조사한 후 파향선추적모형(wave ray-tracing)의 결과를 정리하여 대상 지역에 영향을 미치는 단층을 선정하고, 선정한 단층들의 단층매개변수 값을 일정한 기준을 두고 조정하여 실시한 지진해일 수치모형 실험에서 계산한 결과값을 분석하여 민감도를 결정한다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.145-153
• /
• 2019

Adaptive beamforming methods are known to suppress sidelobes and improve detection performance of weak signal by constructing weight vectors depending on the received signal itself. A standard adaptive beamforming like the MVDR (Minimum Variance Distortionless Response) is very sensitive to mismatches between weight vectors and actual signal steering vectors. Also, a large computational complexity for estimating a stable covariance matrix is required when wideband beamforming for a large-scale array is used. In this paper, we exploit the WBRCB (Wideband Robust Capon Beamforming) method for stable and robust wideband adaptive beamforming of a passive large uniform line array sonar. To improve robustness of adaptive beamforming performance in the presence of mismatches, we extract a optimum mismatch parameter. WBRCB with extracted mismatch parameter shows performance improvement in beamforming using synthetic and experimental passive sonar signals.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.157-162
• /
• 2023

A highly sensitive refractive index bio-sensor based on grating-assisted strip directional coupler (GASDC) is proposed. The sensor is designed using two asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength satisfying phase-matching condition (PMC), and it shows that the change in phase-matching condition with the change in refractive index of the analyte medium in the cover region can be used as a measure of the sensitivity. The proposed sensor will be an on-chip device with a high refractive index sensitivity, and the sensor configuration offers a low propagation loss, thereby enhancing the sensitivity. Furthermore, variation of the sensitivity with the waveguide parameters of sensor is evaluated to optimize the design.