Browse > Article
http://dx.doi.org/10.3795/KSME-B.2013.37.11.1015

Analysis of Operating Characteristics of 200kW Class Micro Gas Turbine  

Kim, Jeong Ho (Division of Mechanical Engineering, Inha Univ.)
Kang, Do Won (Division of Mechanical Engineering, Inha Univ.)
Kim, Tong Seop (Division of Mechanical Engineering, Inha Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.37, no.11, 2013 , pp. 1015-1022 More about this Journal
Abstract
This study simulates the operation of a 200 kW class micro gas turbine that is currently under development. The performance and operating characteristics depending on the load control scheme (constant turbine inlet temperature versus constant turbine exit temperature) and ambient condition were investigated using detailed component performance data. The sensitivities of operating parameters, such as the compressor surge margin and flow path temperatures, according to unit fuel flow change were predicted for a wide load range. The sensitivity analysis showed that the steady state calculation provided useful information about the maximum surge margin reduction during load change.
Keywords
Micro Gas Turbine; Power; Efficiency; Full Load; Part Load; Sensitivity;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Lee, J. J. and Kim, T. S., 2004, "Analysis of Operation Performance of a Micro Gas Turbine Generator System," Journal of Fluid Machinery, Vol. 8, No. 5, pp. 13-21.
2 Kim, J. H., Jeon, Y. J., Kim, T. S. and Ro, S. T., 1999, "Analysis of the Dynamic Characteristics of a Small Regenerative Gas turbine," Trans. Korean Soc. Mech. Eng. B, Vol. 23, NO. 6, pp. 769-777.
3 Park, J. H., 2011, "Practical Application of a 200kW Class Micro Gas Turbine Cogeneration System," Proceedings of 2011 Annual Meeting of Korean Fluid Machinery Association, pp. 491-494.
4 Shin, H. D., Kang, D. W., Kim, T. S., Choi, M. k. and Park, P. J., 2012, "Design Parameter Sensitivity Analysis of a 200kW Class Micro Gas Turbine System," Journal of Fluid Machinery, Vol. 15, No. 6, pp. 39-45.   과학기술학회마을   DOI   ScienceOn
5 Enter Software, Gasturb 9.0, 2001.
6 Bruckner, R. J. and Puleo, B. J., 2008, "Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures," ASME paper GT2008-50174.
7 Rodgers, C. and Watts, J. and Nichols, K. and Brent, R., 2001, "Microturbines, in Distributed Generation," Borbely, A.M. and Kreider, J., ed., CRC Press, pp.119-150.
8 Tan, E. S. and Zulhairi, M. A., 2012, " Feasibility of Biodiesel as Microturbine Alternative Fuel Through Atomization Characteristics Study," ASME GT2012-68039.
9 Visser, W. P. J., Shakariyants, S. and De Later, M. T. L., 2012, "Performance Optimization of a 3kW Microturbine for CHP Applications," ASME GT2012-68686.
10 Kim, B. S., Gil, Y. W. and Hong, W. P., 2009, " The Energy Performance & Economy Efficiency Evaluation of Microturbine Installed in Hospital Buildings," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No, 12, pp. 176-183.
11 Hong, W. P., Kim, B. S. and Cho, Y. S., 2010, " The Energy Performance Analysis of Micro Gas Turbine in Large Scale Store," Journal of the Korean Solar Energy Society, Vol. 30, No. 2, pp. 454-459.
12 Oh, J. S. and Lee, H. S., 2002, " Prototype Development of a 75kW class Microturbine - Design/Manufacture and Self-Sustaining Test-," Proceedings of 2012 Annual Meeting of Korean Fluid Machinery Association, pp. 307-313.
13 Kim, T. S. and Hwang, S. H., 2004, "Performance Characteristics for Off-design Operation of Micro Gas Turbines," Journal of Fluid Machinery, Vol. 7, No. 3, pp. 39-47.   DOI   ScienceOn