• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.511-520
• /
• 2004

The fracture energy evaluated from the previous experimental results can be simulated by using the modified singular fracture process zone (S-FPZ) model. The fracture model has two fracture properties of strain energy release rate for crack extension and crack close stress versus crack width relationship $f_{ccs}$ ( w ) for fracture process zone (FPZ) development. The $f_{ccs}$( w ) relationship is not sensitive to specimen geometry and crack velocity. The fracture energy rate in the FPZ increases linearly with crack extension until the FPZ is fully developed. The fracture criterion of the strain energy release rate depends on specimen geometry and crack velocity as a function of crack extension. The variation of strain energy release rate with crack extension can explain theoretically the micro-cracking, micro-crack localization and full development of the FPZ in concrete.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.802-810
• /
• 2003

In this paper, the modified singular fracture process zone (S-FPZ) model is proposed to consider variation of a fracture criterion for continuous crack propagation in concrete. The fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and crack closure stress (CCS) versus crack opening displacement (COD) relationship in the FPZ. The proposed model can simulate the estimated fracture energy of experimental results. The analysis results of the experimental data shows that specimen geometry and loading condition did not affect the CCS-COD relation. But the strain energy release rate is a function of not only specimen geometry but also crack extension. Until 25 mm crack extension, the strain energy release rate is a constant minimum value, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for an large size specimen. The fracture criterion remains the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localizing. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-tracking and micro-crack localizing behaviors of concrete.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.308-312
• /
• 1988

파괴역학은 역사적으로 볼 때 1960년대부터 본격적인 연구가 진행되었고, 1970년대에 와서 산 업에 응용되기 시작하였으나 국내에서는 방위 산업, 원자력 산업에서 응용하고 있을 뿐 기타 자동차, 조선, 철강 산업에서는 지금 관심을 갖기 시작한 단계이다. 본 고에서는 파괴역학이 설계에서 어떻게 하는 것인지에 대해 간략히 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.1-11
• /
• 1984

Developed is a nonlinear fracture theory which can model the complex fracture behavior of concrete. This theory is based on the nonlinear behavior due to progressive microcracking and strain-softening in the fracture process zone of concrete cracks. The simplified realistic fracture model which preserves the same fracture energy for the different fracture process zone widths is also derived. By modeling fracture through stress-strain behavior, the effect of compressive stresses parallel to the crack plane can be easily taken into account. The comparisons of the present theory with valuable fracture test data available in the literature show good agreements, and the existing linear theory exhibits in many cases large deviations from the actual test results. A simple approximate formula for the fracture energy of concrete which should, be necessary for the fracture analysis of concrete structures is derived. Finally, the application of fracture theory to reinforced concrete and the necessity of further research are discussed.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.383-390
• /
• 1998

0.93m/sec의 평균속도는 변위제어 삼점휨 실험된 콘크리트 보의 하중-변위 측정결과를 선형탄성파괴역학모델과 가상균열모델에 기초한 유한요소법으로 분석하였다. 두 모델 모두 실험결과와 잘 일치하며, 균열성장길이가 약 60∼70㎜가 될 때까지 안전된 균열성장을 보이다 불안정한 균열성장에 의해 파손되었다. 선형탄성파괴역학모델에 의한 수치해석 결과 에너지해방률은 균열성장길이에 비례해서 증가하였으며, 최대값(202N/m)에 이르게 되면 일정한 값을 유지하였다. 가상균열모델에 기초한 수치해석결과 이 연구에 사용된 하중속도와 시험편의 크기에 대해 70㎜의 완전한 파괴진행대가 평성되었으며, 이는 기존의 정적 실험결과에 대한 수치해석 결과보다 상당히 작은 값이었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.561-564
• /
• 2011

다양한 공학/산업적 측면에서 동적 취성 파괴 현상은 매우 중요하다. 취성 균열은 다른 균열 전파에 비해 그 전파 속도가 매우 빠르고 전파 범위가 넓기 때문에 대규모의 파괴 현상을 일으킨다. 동적 전파 중인 취성 균열 거동을 모델화하기 위해 오랜 기간 동안 많은 연구가 진행되었지만, 여전히 많은 부분들이 해석되지 못한 채 남아있다. 특히 균열 생성 및 전파를 위해 인위적인 조건들을 도입해야 하는 것은 기존 방법론들이 가지는 공통적인 문제점이다. 본 연구는 peridynamics를 동적 분기 균열 문제 해석에 도입한다. Peridynamics는 전통적인 연속체 이론에 기반한 수치해석 모델화 기법으로 균열과 같은 비연속성이 있는 문제의 모델화에 강점이 있으며, 인위적인 조건 없이 매우 간단한 방법으로 파괴 현상을 해석할 수 있다. 본 연구에서는 peridynamics 모델이 실험적으로 관측된 분기균열 형상과 균열 전파 속도를 매우 잘 예측해 낼 수 있음을 보인다. 또한 균열팁 주변에 높은 응력이 발생할 때 나타나는 연쇄 분기 현상도 해석할 수 있다. 이와 같은 연구를 통해 응력파가 균열 전파 속도를 변화시키고 전파 방향에도 영향을 주는 것을 알 수 있었다. 수치해석 결과도 또한 실험 결과들과 잘 부합함을 확인하였다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.568-574
• /
• 2001

From measured responses of concrete three-point bend tests, the average values of the responses have been calculated. The fracture behavior of continuously propagating concrete crack has been analyzed from the average responses. The experimental parameters of this study were the initial notch sizes of 25.4㎜ and 6.4 ㎜ and the processing times of 2,000 sec. and 20 sec . The different notch sizes were used for the effects of the size of fracture process zone and specimen geometry, and the processing times for those of initial creep. However the load-point displacement rate in this study did not affect the experimental responses seriously. The average loads were calculated from the average external work of a series of tests, and average crack lengths were determined by using strain gages. Before the peak load, the resistance curve could be determined from the size of fracture process zone, but unstable crack propagation of 88㎜ occurred at the load-point displacement of 0.088∼0.154㎜ after the peak load. The average fracture energy density G$\_$F/$\^$ave/ = 115 N/m occurred during the unstable crack propagation. The fracture process zones were fully developed at the crack length of 111㎜, and the sizes of fracture process zone for initial notches of 25.4㎜ and 6.4㎜ were 86㎜ and 105㎜, respectively. Average fracture energy densities of the resistance curves after full development of fracture process zone were 229 N/m for the initial notch of 25.4㎜ and 284 N/m for 6.4㎜. The values were more than twice of G$\_$F/$\^$ave/.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.462-468
• /
• 2003

최근 전자산업의 발달로 첨단기술의 농업적 응용에 필요한 각종 센서가 개발되고 있어 이를 이용한 농산물의 각종 품질을 비 파괴적으로 측정할 수 있는 연구가 활발히 진행되고 있다. 여러 농산물 중과실의 경도와 같은 물성 인자는 그 중요성에도 불구하고 비 파괴적으로 측정할 수 있는 기술이 개발되고 있지 않고 있다. 레이저 분광법의 경우 표면의 광 산란현상을 이용하여 경도를 비교적 정확하게 측정할 수 있으나 아직까지는 시스템의 가격이 고가이며 사용에 많은 제약이 따르며 근적외선 분광분석법을 이용한 경도 측정은 현재까지 그 정확도가 낮다. (중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.157-164
• /
• 2023

This study aims to analyze the damage and destruction behavior of pallet racks due to external forces through shaking table test. Pallet racks is a general storage racks type consisting of column, beam, and brace to resist an external force. To analyze the safety of the pallet racks due to external force, a shaking table test was conducted to investigate the pallet racks behavior due to external force while increasing the seismic load targeting the pallet racks used in the existing logistics storage facility. As a result of the shaking table test, it was confirmed that the torsion of the pallet racks damaged the connection parts of some members located on the 1st and 2nd levels, thereby destroying the loading equipment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.30-36
• /
• 1984

It is well known that the application of linear elastic fracture mechanics is inadequate to solve the large deformation fracture failures which occurr in ductile manner because of the large scale yielding due to the severe stress concentration in the region adjacent to the crack tip. The authors have been evolved a fracture model, the crack plane equilibrium model, for this kinds of elastic-plastic fracture problems in the previous report. In this report, the crack plane equilibrium model was compared with the Irwin's plastic zone corrected linear elastic fracture mechanics through theoretical comparisons and experimental results to examine the validity of the crack plane equilibrium model as an available tool for nonlinear fracture analysis. Through this study, the main results were reached as follows; Irwin's plastic zone corrected linear elastic fracture mechanics could be applicable only for small scale yielding problems as expected while the crack plane equilibrium model valid as a fracture model for large deformation fracture failure. However, the followings should be considered for the more precise evaluations of CPE model; 1) It is necessary to test more specimens which contain small cracks in the range of 2a/W<0.1. 2) It is important to detect the crack initiation point during the fracture test for determining an accurate fracture load. 3) Effects of specimen thickness in the fracture process zone should be examined.