• The Journal of Korean Obstetrics and Gynecology
• /
• v.29 no.1
• /
• pp.14-34
• /
• 2016

Objectives: The objective of this study was to evaluate the effects of cytotoxicity, skin regeneration, anti-wrinkle, whitening and skin moisturizing of Oncheongeum (OCE).Methods: The cytotoxicity of OCE lyophilized aqueous extracts (yield=13.82%) was observed against human normal fibroblast cells and B16/F10 murine melanoma cells by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium Bromide (MTT) assay, and skin regeneration and anti-wrinkle effects were also evaluated through the assay of collagen type I synthesis compared to the transformation of the growth factor (TGF)-β1, hyaluronidase, collagenase and matrix metalloproteinase (MMP)-1 inhibitory assays compared to oleanolic acid (OA), and elastase inhibitory effects compared to phosphoramidon disodium salt (PP). In addition, OCE’s whitening effects were measured by a tyrosinase inhibitory assay and melanin formation test in B16/F10 murine melanoma cells compared to arbutin, and skin moisturizing effects were observed through a mouse skin water content test, respectively. Results: No OCE treatment-related cytotoxic effects appeared on human normal fibroblasts and B16/F10 murine melanoma cells. OCE concentration-dependently increased the collagen Type I synthesis on human normal fibroblast cells, and also effectively inhibited hyaluronidase, elastase, collagenase and MMP-1 activities. In addition, OCE inhibited melanin production of B16/F10 murine melanoma cells and activity of tyrosinase. And significant and dose-dependent increases of skin water content were detected in OCE-treated mouse skin compared to vehicle control skins. Conclusions: OCE showed favorable and sufficient effects in skin regeneration, anti-wrinkle, whitening and skin moisturizing in this experiment. But more detail mechanisms and studies on the skin protective efficiency of in vivo are needed with the screening of active biological compounds in individual OCE herbs.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.129-139
• /
• 2019

This study investigates the spectral response of red lettuce (Lactuca sativa var crispa L.) to Zn concentration. The control group and the experimental groups treated with 1 mM(ZnT1), 5 mM(ZnT2), 10 mM(ZnT3), 50 mM(ZnT4), and 100 mM(ZnT5) were prepared for a pot experiment. Then, Zn concentration and spectral reflectance were measured for the different levels of Zn concentration in red lettuce. The Zn concentration of the control group had the range of 134-181 mg/kg, which was within the normal range of Zn concentration in uncontaminated crops. However, Zn concentration in the experimental group gradually increased with an increase in concentration of Zn injection. The spectral reflectance of red lettuce showed high peak in the red band due to anthocyanin, high reflectance in the infrared band due to the scattering effect of the cell structure, and absorption features associated with water. As Zn concentration in red lettuce leaves increased, the reflectance increased in the green and red bands and the reflectance decreased in the infrared band. The correlation analysis between Zn concentration and spectral reflectance showed that the reflectance of 700-1300 nm had a significant negative correlation with Zn concentration. The spectral band is a wavelength region closely related to the cell structure in the leaf, indicating possible cell destruction of leaf structure due to increased Zn concentration. In particular, 700-800 nm reflectance of the infrared band showed the strongest correlation with the Zn concentration. This study could be used to investigate the heavy metal contamination in soil around mining and agriculture area by spectroscopically recognizing heavy metal pollution of plant.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.169-188
• /
• 2019

This study was carried out unmanned aerial photography and terrestrial laser scanning to establish digital database on original wall of Gyejoksanseong fortress, and measured ground control points for continuity of the monitoring. It also performed precise examination with the naked eye, unmanned aerial photogrammetry, endoscopy, total station and handy measurement to examine the structural stability of the original walls. The ground control points were considered as a point where visual field can be secured, 3 points were selected around each of the south and north walls. For the right side of the south original wall, aerial photogrammetry was conducted using drones and a deviation analysis of 3-dimensional digital models was performed for short-term monitoring. As a result, the two original walls were almost matched in range within 5mm, and no difference indicating displacement of stones was found, except for partial deviation. Regular monitoring of the areas with structural deformation such as bulging, weak and fracture zone by precisely examining with the naked eye and using high-resolution photo data revealed no distinct change. The inner foundation observed through endoscopy found out that filling stones of the original walls were still remained, while most filling soil was lost. As a result of measuring the total station focusing around the points with structural deformation on the original walls, the maximum displacements of the north and south walls were somewhat high with 6.6mm and 3.8mm, respectively, while the final displacements were relatively stable at below 2.9mm and 1.4mm, respectively. Handy measurement also did not reveal clear structural deformation with displacements below 0.82mm at all points. Even though the results of displacement monitoring on the original walls are stable, it is hard to secure structural stability due to the characteristics of ramparts where sudden brittle fracture occurs. Therefore, it is necessary to conduct conservational scientific diagnosis, precise monitoring, and structural analysis based on the 3-dimensional figuration information obtained in this research.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.66-87
• /
• 2009

The definition of the structure of wooden chamber tomb(piled stone-type) is as follows. It is a tomb with wooden chamber, and stones were piled on top of the wooden chamber, and then a wooden structure was placed on top of the piled stones, and more stones were piled on top of the wooden structure, and sealed with clay. Of course this definition can vary according to periods, the buried, etc. Gyeongju-style piled stone type wooden chamber tombs have some distinguished characteristics compared to general definition of piled stone type wooden chamber tombs. Outside the wooden chamber, either stone embankments or filled-in stones were layed out, and pilet-in stones are positioned right above the wooden chamber, and almost every class used this type, and finally, it is exclusively found in Gyeongju area. First generations of this Gyeongju-style piled stone type wooden chamber tombs appeared in first half of 5th century. These tombs inherited characteristics like ground plan, wooden chamber, double chamber(inner chamber and outer chamber), piled stones, burial of the living with the dead, piled stones, from precedent wooden chamber tombs. However these tombs have explicit new characteristics which are not found in the precedent wooden chamber tombs such as stone embankments, wooden pillars, piled stones(above ground level), soil tumuluses. stone embankments and wooden pillars are exclusively found on great piled stone type above-ground level wooden chamber tombs such as the Hwangnamdaechong(皇南大塚). Stone embankments, wooden pillars, piled stones(above ground level) are all elements of building process of soil tumuluses. stone embankments support outer wall of above-ground level wooden chambers and disperse the weight of tumuluses. Wooden pillars functioned as auxiliary supports with wooden structures to prevent the collapse of stone embankments. Piled stones are consists of stones of regular size, placed on the wooden structure. And after the piled stones were sealed with clay, tumulus was built with soil. Piled stones are unique characteristics which reflects the environment of Gyeongju area. Piled stone type wooden chamber tombs are located on the vast and plain river basin of Hyeongsan river(兄山江). Which makes vast source of sands and pebbles. Therefore, tumulus of these tombs contains large amount of sands and are prone to collapse if soil tumulus was built directly on the wooden structure. Consequently, to maintain external shape of the tumulus and to prevent collapse of inner structure, piled stones and clay-sealing was made. In this way, they can prevent total collapse of the tombs even if the tumulus was washed away. The soil tumulus is a characteristic which emerges when a nation or political entity reaches certain growing stage. It can be said that after birth of a nation, growing stage follows and social structure will change, and a newly emerged ruling class starts building new tombs, instead of precedent wooden chamber tombs. In this process, soil tumulus was built and the size and structure of the tombs differ according to the ruling class. Ground plan, stone embankments, number of the persons buried alive with the dead, quantity and quality of artifacts reflect social status of the ruling class. In conclusion, Gyeongju-style piled stone type wooden chamber tombs emerged with different characteristics from the precedent wooden chamber tombs when Shilla reached growing stage.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.165-189
• /
• 2006

The purpose of this study is to examine process and organization of local government-managed construction by reviewing official documents and materials in regard to the official residences and castles officially constructed in Dongnae in the 19c Chosun Dynasty. Results of this study can be described as follows. 1) The construction of official residences requires exchanges of official documents among upper and lower governmental agencies concerned. Previously prepared for some 1 or 2 months, the construction was proceeded through proceeded from Paok to Gaegi, Ipju, Sangryang, Gaeok and to Iptaek. Such construction was carried out independently and concurrently Gijang and Yangsan neighboring Dongnae provided cooperation by way of supplying labor and timbers. 2) Dongnaebu castle was constructed under local autonomy system, like other government-oriented works, as governor of Dongnae became responsible for defending such establishment in 1739. The castle was built up in 1731 as an establishment with 6 gated and 15 forts. Directly controlled by governor of Dongnae, the castle continued to be partially repaired until the 19th century. Under the regime of Daewongun, the castle was enlarged and extended for military strengthening. Besides the gate having double-gated structure for the outside wall, the other five gates came to have bastions and 30 forts were additionally established, dramatically changing the structure of the castle as whole. 3) Government-managed construction was often implemented by an organization whose members included local government officials, lower administrative agencies and local influential persons. The construction of official residences was implemented by Gamyeokdogam which was headed by Jwasu of Hyangcheong. In the construction, chief of military officials became supervisor, who was responsibly supported by Saekri. The construction of castled were divided into several works, for example, establishments of fortress, tower gate and quarrying stone were implemented by the organization of Paejang, Gamkwan and Saekri. As a military official, Gamkwan supervised the construction. Saekri was in charge of related internal affairs. Paejang was an technical expert leading several workers. The construction of castles in 1870 were organized as a general rule having particularity of social conditions on Dongnae.

• Journal of Christian Education in Korea
• /
• v.64
• /
• pp.51-79
• /
• 2020

This study was conducted to pursue Christian education with the socially underprivileged in the era of the Corona-19 pandemic. Corona-19 is a disaster which is caused, destroyed and exploited by human being. At the time of the indiscriminately spreading global pendemic, we must work together to overcome our selfish self-centeredness and make an attempt for everyone in need. It is a study on how humans can help each other survive in the era of Corona-19 and its post-corona. The problem is that there is too much discrimination between the state, race, and economic capacity, and in the end, the extreme discrimination of capitalism is appeared in society and across the country. There is no significant difference in the confirmation rate when Corona-19 infiltrates, but there is a big difference between those with and less in mortality. As a result, today's reality is that people who have a hard time living because they have less usually are far more vulnerable to blocking and defeating virus attacks. Unfortunately, this is the current situation. From the standpoint of a large discourse, attention is paid to climate change and ecological environment, and as a micro discourse, a number of societies who live with tremendous discrimination according to the gap between the rich and the poor (it is gender, race, disabled, nationality) that exist in almost all countries on the planet. We need attention to the weak. To this end, discourses on vaccine inequality, discourses on the needs of the disabled, discourses on different racial damages, discourses on polarization and dystopia, and discourses on educational inequality were treated as the reality faced by the socially underprivileged in the Corona 19 pandemic. To explore Christian education with the socially underprivileged, to explore ways of sharing, giving, and solidarity for win-win, discourse on inter-dependence and mutual responsibility of mankind, direct counter-measures for the socially underprivileged, and critical literacy education. He proposed a discourse on Korea, a discourse on Homo sapiens, which must return to being a part of creation, and finally a theology of friendship with the weak. Christian education based on Bible words must go forward in the era of the Corona 19 pandemic, hungry, naked, nowhere to go, sick, but dying because of being unable to get a remedy. He emphasized the need to establish a caring theology of friendship and pursue a life in which thought and practice harmonize. Thus, the paper proposed the spirit of Christian education not only doing something for the socially weak, but with the socially weak in the daily life.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.135-142
• /
• 2022

Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.249-267
• /
• 2021

The use of big data accumulated along with the progress of digitalization is bringing disruptive innovation to the global agricultural industry. Recently, the government is establishing an agricultural big data platform and a support organization. However, in the domestic agricultural industry, the use of big data is insufficient except for some companies in the field of cultivation and growth. In this context, this study identifies factors affecting the intention to use big data in terms of technology, organization and environment, and also confirm the moderating effect of technical field, focusing on agricultural ventures which should be the main entities in creating innovation by using big data. Research data was obtained from 309 agricultural ventures supported by the A+ Center of FACT(Foundation of AgTech Commercialization and Transfer), and was analyzed using IBM SPSS 22.0. As a result, Among technical factors, relative advantage and compatibility were found to have a significant positive (+) effect. Among organizational factors, it was found that management support had a positive (+) effect and cost had a negative (-) effect. Among environmental factors, policy support were found to have a positive (+) effect. As a result of the verification of the moderating effect of technology field, it was found that firms other than cultivation had a moderating effect that alleviated the relationship between all variables other than relative advantage, compatibility, and competitor pressure and the intention to use big data. These results suggest the following implications. First, it is necessary to select a core business that will provide opportunities to generate new profits and improve operational efficiency to agricultural ventures through the use of big data, and to increase collaboration opportunities through policy. Second, it is necessary to provide a big data analysis solution that can overcome the difficulties of analysis due to the characteristics of the agricultural industry. Third, in small organizations such as agricultural ventures, the will of the top management to reorganize the organizational culture should be preceded by a high level of understanding on the use of big data. Fourth, it is important to discover and promote successful cases that can be benchmarked at the level of SMEs and venture companies. Fifth, it will be more effective to divide the priorities of core business and support business by agricultural venture technology sector. Finally, the limitations of this study and follow-up research tasks are presented.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.419-426
• /
• 2021

Purpose: In the surgical treatment of pyogenic lumbar spondylodiscitis, screw insertion at the affected vertebra has been avoided because of biofilm formation, and the risk of infection recurrence. The authors analyzed the success rate of infection treatment while minimizing the number of instrumented segments by inserting pedicle screws into the affected vertebrae. Therefore, this study examined the usefulness of this technique. Materials and Methods: From January 2000 to June 2018, among patients with pyogenic lumbar spondylodiscitis treated surgically, group A consisted of patients with pedicle screws inserted directly at the affected vertebrae (28 cases), and group B underwent fusion by inserting screws at the adjacent normal vertebrae due to bone destruction of the affected vertebral pedicle (20 cases). The classified clinical results were analyzed retrospectively. All patients were treated via the posterior-only approach, so the affected disc and sequestrum were removed. Posterior interbody fusion was performed with an autogenous strut bone graft, and the segments were then stabilized with pedicle screw systems. The hospitalization period, operation time, amount of blood loss, EQ-5D index, duration of intravenous antibiotics, and the clinical and radiological results were analyzed. Results: In group A, the number of instrumented segments, operation time, blood loss, and EQ-5D index at one month postoperatively showed significant improvement compared to group B. There were no significant differences in the duration of antibiotic use, hospitalization, radiological bone union time, sagittal angle correction rate, and recurrence rate. Conclusion: Minimal segmental fixation, in which pedicle screws were inserted directly into the affected vertebrae through the posterior approach, reduced the surgery time and blood loss, preserved the lumbar motion by minimizing fixed segments and showed rapid recovery without spreading or recurrence of infection. Therefore, this procedure recommended for the surgical treatment of lumbar pyogenic spondyodiscitis.