• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.13-27
• /
• 2011

This paper presents an investigation of the structural stability of cable-stayed bridges, using geometric nonlinear finite-element analysis and considering various geometric nonlinearities, such as the sag effect of the cables, the beam-column effect of the girder and mast, and the large displacement effect. In this analytic research, a nonlinear frame element and a nonlinear equivalent truss element were used to model the girder, mast, and cable member. The live-load cases that were considered in this research were assumed based on the traffic loads. To perform reasonable analytic research, initial shape analyses in the dead-load case were performed before live-load analysis. In this study, the geometric nonlinear responses of the cable-stayed bridges with different cable arrangement types were compared. After that, parametric studies on the characteristics of the structural stability in critical live-load cases were performed considering various geometric parameters, such as the cable arrangement type, the stiffness ratios of the girder and mast, the area of the cables, and the number of cables. Through this parametric study, the effect of geometric shapes on the structural stability of cable-stayed bridges was investigated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.60-68
• /
• 2012

This study describes an analytical and experimental investigation of the pedestrian steel-deck truss bridge in the City of Rochester, New York, U.S.A. This investigation was undertaken to provide assurance that this important bridge continues to be functional for this use. An ambient vibration experiment on full-scale structures is a way of assessing the reliability of the various assumptions employed in the mathematical models used in analysis. It is also the most reliable way of determining the structural parameters of major importance in structural dynamics, such as the mode shapes and the associated natural frequencies. Pedestrian-induced vibrations have been measured on the bridge to determine the displacement and the vertical and transverse dynamic characteristics of the steel deck truss. In the analytical modeling, three-dimensional finite element analysis was developed and validated against the ambient tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.85-95
• /
• 2012

This paper presents an investigation on the ultimate behavior of steel cable-stayed bridges using nonlinear finite element analysis method. Cable-stayed bridges exhibit various geometric nonlinearities as well as material nonlinearities, so rational nonlinear finite element analysis should be performed for investigation of the ultimate behavior. In this study, ultimate behavior of steel cable-stayed bridges was studied using rational ultimate analysis method. Nonlinear equivalent truss element and nonlinear frame element were used for modeling the cable, girder and mast. Moreover, refined plastic hinge method was adopted for considering the material nonlinearity of steel members. In this study, the 2-step analysis method was used. Before live load analysis, initial shape analysis was performed in order to consider the dead load condition. For investigation of the ultimate behavior of steel cable-stayed bridges, analysis models which span length is 920.0 m were used. Radiating type and fan type were considered as the cable-arrangement types. With various quantitative evidences such as load-displacement curves, deformed shapes, locations of the yield point or region, bending moment distribution and so on, the ultimate behavior of steel cable-stayed bridges was investigated and described in this paper.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.73-78
• /
• 2005

본 연구에서는 서울시 한강에 위치한 교량을 대상으로 다양한 조망점에 따른 경관조명의 물리량을 측정하고 그 특성을 분석함으로써 동일한 연구대상에 대하여 조망점이 달라졌을 때 나타나는 물리적 변화를 통해 경관조명분야의 물리량평가방법론의 새로운 접근방법론을 제시하는 것이 목적이다. 이를 위하여 연구대상의 선정은 교량구조형식에 따라 분류하고. 경관조명이 설치된 교량 17개소 중 다양한 조망점과 현장측정의 편리성 등을 고려하여 광진교(거더교), 올림픽대교(사장교), 동작대교(트러스교), 동작대교(아치교)를 연구대상으로 선정하였다. 조망점은 한강둔치를 이용하는 방문객들이 바라보는 투시뷰, 교량주변 건축물에서 바라보는 건물뷰 그리고 교량 위를 이동하면서 바라보는 주행뷰로 구분하였다. 이러한 연구방법으로 도출된 결과는 동일한 경관조명연출을 토대로 교량별 조망점에 따른 휘도측정 및 분석에서 측정되는 각도, 거리, 방향에 따라 정형화된 비율은 아니지만 휘도값에 있어서 차이가 있다는 것을 확인 할 수 있었으며, 투시뷰와 건물뷰는 동일한 교량 구성요소를 갖고 있어 상호간 비교 분석이 가능하고 경관조명평가 요소로서 그 기능을 담당 할 수 있다고 판단되며, 주행뷰는 교량형식과 가로등의 영향을 많이 받으므로 평가요소로써 조망점을 활용하기에는 조금 더 깊은 연구가 선행되어야 할 것으로 보인다. 따라서 경관조명을 평가함에 있어 다양하게 바라보는 조망점은 조명연출로 인한 시각적 인식에 차이를 유발시킬 수 있어 경관조명을 평가할 때 다양한 조망점의 설정이 보다 객관적이고 정확한 분석이 가능할 것으로 판단된다.ridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서 $8.5\;{\times}\;10^3\;cell\;mL^L{-1}$로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$)으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직 ${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.group으로, 용존산소량, 전기전도도, pH, 인산염이 정점 3, 4, 5에서 같은 group으로 묶였다.유의적인 CAT 활성 증가효과가 나타났고, 간조직의 시토졸 1획분에서는 대조군 대비 15${\sim}$27%의 CAT 활성 증가효과가 인정되었다. 이상의 결과에서 목초액의 장기간 투여는 간조직 중의 활성산소의 억제효과뿐만 아니라 방어시스템으로서 활성산소 제거효소의 역할도 충실히 수행하여 노화를 효과적으로 예방하고 억제할 수 있을 것으로 기

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.190.1-190.1
• /
• 2010

풍력자원평가를 위해 풍력단지 개발대상지의 국지풍황 대표지점에 설치하는 풍황탑(met-tower 또는 풍황마스트; met-mast)은 모노폴(monopole), 삼각단면 트러스 또는 사각단면 트러스 구조를 갖는다. 풍향계 및 풍속계는 이러한 지지구조물에 의한 풍속의 교란 또는 차폐영향을 최소화하기 위하여 긴 붐(boom)의 끝단에 설치되지만 계측기가 풍황탑의 직후방 후류영역에 놓이게 될 경우 차폐영향을 완전히 피하기는 어렵다. 저자들의 선행연구에 따르면 풍황탑 차폐영향은 평균풍력밀도의 경우 2.5% 이상의 오차를 유발할 수 있으므로 풍력자원평가 시 필히 고려되어야 할 불확도 요인인 것이다. 이에 한국에너지기술연구원에서는 풍황탑 주위의 대기유동장을 전산유동해석을 이용하여 차폐영향의 정도를 정량적으로 수치모사함으로써 이를 보정하는 기술을 개발한 바 있다(현재 특허심사 중). KIER-$ShadeFree^{TM}$는 이 특허기술을 프로그램화 한 것으로, 시범적으로 다수의 풍황탑 풍력자원 측정자료에 적용하여 상당한 보정효과에 의한 풍력자원평가의 정확도 향상효과를 볼 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.219-229
• /
• 2003

The extended tangent stiffness matrices and force-deformation relations of the elastic catenary element were initially derived through the addition of the unstrained length of cables to unknown nodal 'displacements. A beam-column element was then introduced to model the deck and pylon of cable-stayed bridges. The conventional geometric nonlinear analysis, initial force method, and TCUD method were summarized, with an effective method combining two methods presented to determine the initial shapes of cable-stayed bridges with dead loads. In this combined method, TCUD method was applied to eliminate vertical and horizontal displacements at cable-supported points of decks and on top of pylons, respectively. The initial force method was also adopted to eliminate horizontal and vertical displacements of decks and pylons. Finally, the accuracy and validity of the proposed combined method were demonstrated through numerical examples.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.355-363
• /
• 2004

In order to obtain the effective length factor of beam-column members of plane frames, this paper extensively used an alignment chart approach, based on the nomograph given in LRFD-AISC specification commentaries. However, it should be noted that various simplifications and assumptions were introduced in constructing the alignment chart. To overcome the practical limitations of the alignment chart, this paper proposes a simple but accurate procedure that determined the effective buckling length for stability design of main members of cable-supported bridges. This method requires the full system buckling analysis. The numerical examples showing the suitability of the present scheme are discussed and some conclusions are drawn.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.383-392
• /
• 2018

This study investigated the change of additional axial stress of rail and reaction force at bridge bearings due to the track-bridge interaction when laying CWR on non-ballasted railway bridges including truss bridges with relatively long span. According to the results of the present study, additional axial stresses of rail and reaction forces at bridge bearings showed a large increase when CWR is installed on the non-ballasted railway bridge. The additional axial stress of rail can be acceptable if sufficient lateral resistance can be obtained. However, if the reaction force increases, there is a risk of damage of the bearing or pier, and therefore, it is necessary to take measures to mitigate the reaction force. It is found that additional axial stress of rail decreases when considering the frictional resistance of the bridge movable support, but its effect on the bearing reaction force is very small. On the other hand, when the longitudinal track restraint decreases, both additional axial stress of rail and bearing reaction force are reduced to a large extent. Also, when the ZLR fastening devices are applied to the region where the additional axial stress of rail is highest, bearing reaction force as well as additional axial stress of rail greatly decreased. Therefore, the application of ZLR fastening devices with the reduction of the longitudinal track restraints is very effective for installing CWR on non-ballasted railway bridges.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.351-358
• /
• 2002

현재 우리나라에서 공용중인 강철도교의 50% 이상이 공용기간 50년 이상 경과된 교량으로 구성되어 있는데, 이와 같이 공용기간이 오래된 강교량의 내구성에 영향을 미치는 주된 열화손상으로 피로와 부식이 보고되고 있다. 이 가운데 부식열화현상에 관한 조사에 의하면 부식손상의 대부분은 국부적인 것으로 분류할 수 있으나 부식면적이 대상부재의 25%를 넘는 경우도 부재의 특성에 따라서는 l∼6%에 이르는 것으로 보고되고 있다. 그러나 부식으로 인한 단면감소에 따른 응력 발생 특성에 대한 연구나 실교량에서의 각 부재별 부식손상 정도에 따른 실측자료의 축적이 미흡한 실정이어서 유지관리에서의 부식에 대한 정량적인 평가가 체계적으로 이루어지고 있지 않다.(중략)

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.313-321
• /
• 2008

Recently in Japan, fracturing was observed on the diagonal member of a through truss bridge at the boundary region with the concrete slab. Local corrosion damage where the diagonal member was enclosed in the concrete slab is an important factor in the fracture. In this study, accelerated exposure tests were carried out on concrete-steel model specimens simulating steel members at the boundary with concrete. Fatigue tests were then performed on the corroded model specimens. Accelerated exposure tests of the S6-cycle, which is carried out on the model specimens for 150, 300, 450 and 600 da ys. Their surface geometry was then measured. From the accelerated exposure test results, change in maximum and mean corrosion depths was determined according to the testing periods. The effect of local corrosion on fatigue strength was also presented based on the fatigue test results.