• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.104-105
• /
• 2011

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.411-419
• /
• 2016

The objective of this study was to evaluate the application possibility of tube type electrolysis module system using recirculation process through removal organic matters and nitrogen in the pigment wastewater. The tube type electrolysis module consisted of a inner rod anode and an outer tube cathode. Material used for anode was titanium electroplated with $RuO_2$. Stainless steel was used for cathode. It was observed that the pollutant removal efficiency was increased according to the decrease of flowrate and increase of current density. When the retention time in tube type electrolysis module system was 180 min, chlorate concentration was 382.4~519.6 mg/L. The chlorate production was one of the major factors in electrochemical oxidation of tube type electrolysis module system using recirculation process used in this research. The pollutant removal efficiencies from the bench scale tube type electrolysis module system using recirculation operated under the electric charge of $4,500C/dm^2$ showed the $COD_{Mn}$ 89.6%, $COD_{Cr}$ 67.8%, T-N 96.8%, and Color 74.2%, respectively and energy consumption was $5.18kWh/m^3$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.515-522
• /
• 2010

The objective of this study is to investigate the air-side heat transfer characteristics of a spirally-coiled circular fin-tube heat exchanger for various geometric parameters under non-frosting conditions. The heat transfer characteristics of the heat exchanger were analyzed with respect to heat exchanger geometries, and then, the characteristics were compared with those of rectangular-plate fin-tube heat exchangers with discrete fins. The heat transfer coefficient increased with a decrease in the number of tube rows and an increase in the fin pitch. The optimum length of the L-foot was 2.7 mm. In addition, the heat transfer rate increased with a decrease in the tube pitch and the tube thickness. The heat transfer coefficient of the spirally-coiled circular fin-tube heat exchanger was 24.3% higher than that of the rectangular-plate fin-tube heat exchanger.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.752-760
• /
• 2021

The present study aimed to identify predictors of Youtube creator's Willingness to work as a profession. This work is notable, given its prevalence in preference as an occupation due to the development of information and communication technology. In the present work, a survey study was utilized and respondents' perception of job values, interest, self-esteem as well as willingness to work were measured. The results from a multiple regression analysis indicate that, realistic type (-), artistic type (+), corporate type (+) job value and job interest were significantly predictive of willingness to work. This study discussed implications including the need to establish career support services for YouTube creators as a profession and further for differentiated approaches based on job values or individual tendencies. The result from the current work is important, in that this study identified the willingness and influential factors of YouTube creators from a professional perspective, reflecting the recent growing interest in YouTube creators.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.659-662
• /
• 2003

• Journal of the KSME
• /
• v.57 no.9
• /
• pp.40-44
• /
• 2017

이 글에서는 Low GWP 냉매를 이용하는 셸-튜브형 증발기 개발 기술에 대해서 소개하고자 한다. 자세히는 터보냉동기에 사용되는 만액식 증발기에 대한 기술 소개 및 향후 개발 연구에 대해 소개한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.829-835
• /
• 2010

This paper presents a disposable power generator for microfluidic devices; the power generator has a tubular PEMFC and a $H_2$ generator. The tubular PEMFC has a tubular MEA (diameter: 1.52 mm) that is supported by a spiral wire electrode. The $H_2$ generator supplied $H_2$ to the tubular PEMFC; $H_2$ was generated via the reaction of Al foil (27 mg) and 5 M NaOH (0.12 ml). The open circuit voltage and power density of a unit cell of the tubular PEMFC were 0.81 V and $16.4\;mW/cm^2$ (0.35 V), respectively. The $H_2$ generator generated 11.6 ml $H_2$ for 15min. The power generator was continuously operated for 15 min at 0.64 mW (0.71 V) and for 10 min at 1.06 mW (0.46 V). We experimentally verified that it is feasible to use the proposed power generator as a power source for microfluidic devices; in the experiment, an LED (2.5 mW; 1.8 V) was lit for 10 min by using three serially connected TPEMFCs and one $H_2$ generator.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.50-51
• /
• 2017

최근 전 세계적으로 차세대 초고속 교통수단의 연구, 개발에 박차를 가하고 있다. 대표적으로 미국에서 개발하고 있는 하이퍼루프는 승객을 태운 차체가 원통형인 튜브안에서 최대 1200 km/h로 이동하는 초고속 교통수단이다. 이렇게 빠른 속도에 도달하기 위해서 수십 MW 수준의 상당히 큰 전력이 필요하며, 이러한 큰 전력소모에 의한 전력망의 부담을 덜기 위해, 태양광 시스템을 튜브에 장착하여 추진에 필요한 일부 전력을 태양광 발전으로 대체하는 시스템이 연구되고 있다. 본 논문에서는 튜브의 방향, 태양전지의 배열에 따른 에너지 생산량, 전력발전량 및 비용 등의 다각적인 측면에서의 분석을 제시하였다. 원통형 튜브에 부착되는 태양전의 배열을 여섯 가지 경우로 나누었을 때, 삼각 지붕 모양으로 태양전지를 배열한 Case 2가 가장 높은 에너지 생산량을 보였다. 하지만 태양전지의 단위면적 당 에너지 생산량을 비용으로 계산하였을 경우, 튜브 위에 평평하게 태양전지를 배열한 Case 1이 가장 높은 가격 경쟁력을 가졌다.

• Journal of the KSME
• /
• v.33 no.11
• /
• pp.936-941
• /
• 1993

최근 소비전력 구제 및 $CO_{2}$ 발생량 구제 등으로 인하여 에너지 절약형 제품에 대한 요 구가 점증하고있어 핵심부품인 열교환기의 효율 향상은 숙명적인 과제라 할 수 있다. 에어컨에 사용되고 있는 응축기와 증발기(condenser/evaporator)는 대부분이 핀-튜브(fin-tube)형의 직교 류형 열교환기 (crossflow heat exchanger)이다. 이와 같은 열교환기의 성능에 영향을 미치는 인자들은 크게 핀과 튜브로 구성되는 기하학적인 인자와 공기부와 냉매부로 나뉘어지는 물리적인 인자로 나눌 수 있다. 이 글에서는 핀-튜브형 열교환기의 설계시 고려하여야 할 기하학적 인자와 물리적 인자에 대하여 기술하고자 한다.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.176-177
• /
• 2010